Measurement of sugars using the laser spray technique with a gold capillary

A gold (Au) capillary has higher thermal conductivity than a stainless steel capillary and can withstand capillary over-heating induced by high CO(2) laser irradiation (over 2.5 W) better than a stainless steel capillary. For this study, a laser spray using an Au capillary was applied for the detection of sugars. The signal of cationized compounds [M+Na](+) can be detected with higher sensitivity than with conventional laser sprays using high laser power (over 2.7 W). Using 3.5 W of laser power, the signal intensity is 15 times higher than the maximum value with stainless steel (2.3 W) in a 10(-5) M maltose aqueous solution. It is considered that almost all the water molecules evaporate by laser irradiation, which is impossible to achieve using a stainless steel capillary.     

Autonomous DNA computing machine based on photochemical gate transition

We report the construction of a one-pot autonomous DNA computing machine based on photochemical gate transition (photocleavage, hybridization, and photoligation), and we performed binary digit additions using this machine. In our method, both photochemical DNA manipulations previously reported, photoligation via 5-carboxyvinyldeoxyuridene (cvU) containing ODN and photocleavage via carbazole-modified ODN, were employed. The binary digit additions were autonomously carried out by one-time irradiation at 366 nm in the single test tube. The fluorescence readout by the DNA chip was in good agreement with the correct answer of binary digit additions. We believe that this system is easily applicable to correlation analysis between SNPs as well as other binary digit processing, such as subtraction.     

Biological properties of opioid peptides replacing Tyr at position 1 by 2,6-dimethyl-Tyr.

To understand the effect of the replacement of Tyr residue at position 1 in opioid peptides by 2,6-dimethyl-Tyr (Dmt) on the biological property, chiral (D or L) Dmt1 analogs of Leu-enkephalin (Enk) and Tyr-D-Arg-Phe-beta Ala-NH2 (YRFB) were synthesized and their enzymatic stabilities, in vitro bioactivities and receptor binding affinities compared with those of parent peptides. [L-Dmt1]Enk (1) exhibited 4-fold higher stability against aminopeptidase-M and possessed dramatically increased activities in guinea pig ilium (GPI) (187-fold) and mouse vas deferens (MVD) (131-fold) assays, and in rat brain receptor binding assays (356-fold at mu receptor and 46-fold at delta receptor) as compared to Enk. [L-Dmt1]YRFB (3) also exhibited increased activities in GPI (46-fold) and MVD (177-fold) assays, and in the binding assays (69-fold at mu receptro and 341-fold at delta receptor) as compared to the parent peptide. [D-Dmt1]Enk (2) and [D-Dmt1]YRFB (4) exhibited activities with diminished or lesser potency than the parent peptide in all assays. These results indicate that there is a tendency for mu affinity to be enhanced more than delta affinity with introduction of L-Dmt into delta ligand peptide (Enk), and for delta affinity to be enhanced more than mu affinity in case of mu ligand peptide (YRFB), resulting in reduced receptor selectivities at the receptors.     

Synthesis of well-defined polystyrene with multi-functional end groups utilizing cyclotriphosphazene

Telechelic polystyrenes with five benzyl chloride moieties at the polymer end (PSt-E) were prepared by coupling reaction of polystyryllithium with hexakis(4-chloromethyl-phenoxy)cyclotriphosphazene ( 4 ). The coupling reaction occurs almost quantitatively and unfavorable side reactions were not operative. When a mole ratio [ 4 ]/[sec-BuLi] = 9.3 was used, polystyrenes with cyclophosphazene carrying five benzyl chloride moieties at the polymer end (PSt-E) were obtained in more than 90% yield, which have narrow and predictable molecular weights (M _w/M _n = 1.05). A star shaped polystyrene with phosphazene core could also be prepared by using excess polystyryl anions.     

Shallow surface etching of organic and inorganic compounds by electrospray droplet impact

The electrospray droplet impact (EDI) was applied to bradykinin, polyethylene terephthalate (PET), SiO₂/Si, and indium phosphide (InP). It was found that bradykinin deposited on the stainless steel substrate was ionized/desorbed without the accumulation of radiation products. The film thickness desorbed by a single collisional event was found to be less than 10 monolayers. In the EDI mass spectra for PET, several fragment ions were observed but the XPS spectra did not change with prolonged cluster irradiation. The etching rate for SiO₂ by EDI was measured to be ∼0.2 nm/min. The surface roughness of InP etched by EDI was found to be one order of magnitude smaller than that etched by 3 keV Ar⁺ for about the same etching depths. EDI is capable of shallow surface etching with little damage left on the etched surface.     

Electrospray droplet impact/secondary ion mass spectrometry: cluster ion formation

The electrospray droplets that are sampled through an orifice into the vacuum chamber are accelerated by 10 kV and impact on the stainless steel substrate. The mass and the kinetic energy of electrospray droplets are roughly estimated to be a few 10(6) u and approximately 10(6) eV, respectively. The molecular ion M(+.) and the protonated molecule [M+H](+) are observed as secondary ions for chrysene and coronene deposited on the metal substrate (no matrix used). The ionization may take place in the shock wave generated by the high-momentum coherent collision between the droplet projectile and the solid sample. Cluster ions of H(+)(H(2)O)(n) and CF(3)COO(-)(H(2)O)(n), with n up to approximately 150, were observed as secondary ions formed by the electrospray droplet impact ionization (EDI) for 10(-2) M trifluoroacetic acid (TFA) aqueous solution. This indicates that the charged droplets that collide with the metal substrate with the kinetic energy of approximately 10(6) eV do not vaporize completely but are disintegrated into many tiny microdroplets. The ion signal intensity anomalies (i.e. magic numbers) were observed for the cluster ions of H(3)O(+)(H(2)O)(n) and CF(3)COO(-)(H(2)O)(n) for 10(-2) M TFA aqueous solution and of Cs(+)(H(2)O)(n), I(-)(H(2)O)(n), Cs(+)(CsI)(n), and I(-)(CsI)(n) for 10(-2) M CsI aqueous solution.     

Mass spectrometric monitoring of oxidation of aliphatic C6–C8 hydrocarbons and ethanol in low pressure oxygen and air plasmas

Experimental and theoretical studies on the oxidation of saturated hydrocarbons (n‐hexane, cyclohexane, n‐heptane, n‐octane and isooctane) and ethanol in 28 Torr O₂ or air plasma generated by a hollow cathode discharge ion source were made. Ions corresponding to [M + 15]⁺ and [M + 13]⁺ in addition to [M ? H]⁺ and [M ? 3H]⁺ were detected as major ions where M is the sample molecule. The ions [M + 15]⁺ and [M + 13]⁺ were assigned as oxidation products, [M ? H + O]⁺ and [M ? 3H + O]⁺, respectively. By the tandem mass spectrometry analysis of [M ? H + O]⁺ and [M ? 3H + O]⁺, H₂O, olefins (and/or cycloalkanes) and oxygen‐containing compounds were eliminated from these ions. Ozone as one of the terminal products in the O₂ plasma was postulated as the oxidizing reagent. As an example, the reactions of C₆H₁₄^+? with O₂ and of C₆H₁₃⁺ (CH₃CH₂CH⁺CH₂CH₂CH₃) with ozone were examined by density functional theory calculations. Nucleophilic interaction of ozone with C₆H₁₃⁺ leads to the formation of protonated ketone, CH₃CH₂C(=OH⁺)CH₂CH₂CH₃. In air plasma, [M ? H + O]⁺ became predominant over carbocations, [M ? H]⁺ and [M ? 3H]⁺. For ethanol, the protonated acetic acid CH₃C(OH)₂⁺ (m/z 61.03) was formed as the oxidation product. The peaks at m/z 75.04 and 75.08 are assigned as protonated ethyl formate and protonated diethyl ether, respectively, and that at m/z 89.06 as protonated ethyl acetate. Copyright © 2016 John Wiley & Sons, Ltd.