Amino acid end-group in commercial heparin. III. Determination of the number of amino groups of amino acid and hexosamine residues per heparin molecule

The reactions of heparin with 2,4,6-trinitrobenzenesulfonic acid (TNBS) were studied spectrometrically. Seven different commercial heparins were used in this study. The amino groups react with TNBS to form equimolar amounts of trinitrophenylated (TNP) amino groups and bisulfite ions. The TNP-amino groups further react with bisulfite ions to form the monosubstituted anionic sigma complex. The absorption spectrum with two maxima at approximately 350 nm and approximately 420 nm, characteristic of either the TNP-amino groups or the complex, was analyzed for the reaction of TNBS with heparin. It was shown that the reactivities of TNBS with amino groups from α-amino acid and hexosamine residues are greatly different. By combining the results of the reaction kinetics and the reaction of heparin with Sanger's reagent, the number of the α-amino groups and the free amino groups in hexosamine residues were determined. These data have been performed with a range of heparins from different commercial sources, of different activities and physical characteristics. No correlation was found between the free amino contents of these heparins and biological potency. © 1993 John Wiley & Sons, Inc.     

Effect of equimolar salt to decyltrimethylammonium decyl sulfate on vesicle formation and surface adsorption

The aqueous solution of mixture of sodium decyl sulfate (SDeS) and decyltrimethylammonium bromide (DeTAB) has been found to form equilibrium multilamellar vesicles (MLV) spontaneously. We measured the surface tension of the aqueous solution of 1:1 mixture of SDeS and DeTAB as a function of temperature T at various molalities m under atmospheric pressure. The surface density, the entropy of adsorption and the entropy of vesicle formation are evaluated and compared with those of the decyltrimethylammonium decyl sulfate (DeTADeS) aqueous solution system to investigate the role of small counterions in the mechanism of equilibrium vesicle formation. The saturated surface density Gamma (H,C ) vs T curve of the SDeS/DeTAB system sits below that of the DeTADeS system. Therefore, sodium and bromide ions are negatively adsorbed and nevertheless, they neutralize the electric charge of the decyl sulfate ion DeS(-) and the decyltrimethylammonium ion DeTA(+) to some extent to weaken the electrostatic attraction between the polar head groups in the adsorbed film. The net surfactant concentration required for vesicle formation was larger in the SDeS/DeTAB system. Hence, the electrostatic attraction between the polar head groups of the surfactant ions which is one of the major driving forces for vesicle formation is weakened by the presence of the counterions Na(+) and Br(-). Small but distinct changes in the surface density and the entropies of MLV formation of the SDeS/DeTAB system from those of the DeTADeS system were also found.     

A new method of removing excess of reagent from organic phases in the solvent extraction of metal complex anions with quaternary ammonium salts: Spectrophotometric determination of micro amounts of cobalt with 2-nitroso-1-naphthol-4-sulfonic acid

The removal of excess reagent extracted into an organic phase in the solvent extraction of a metal complex anion with a quaternary ammonium ion is discussed. With a given chelating ligand (HO—R—SO₃H), the order of extractability is HO—R—SO₃^- > M(OR—SO₃)^n- > X^- > ^-O—R—SO₃^- when an anion such as nitrate or halide is added. If suitable amounts of the anion are added, only the excess of reagent can be removed. The principle is applied to the extraction with zephiramine of the cobalt complex anion formed with 2-nitroso-1-naphthol-4-sulfonic acid. Micro amounts of cobalt in pure nickel salts were determined spectrophotometrically.     

Requirement for radiation shields of transportation pipe for on line inhalation gases from compact cyclotron in positron emission tomography

In the unit housing of a compact cyclotron and positron emission CT (PET), positron emitting gas such as 15O, 11C, C15O2, C15O etc. is supplied from a cyclotron to a PET room through a transportation pipe with an appropriate shield to reduce positron annihilation radiation. Using lead or concrete shield blocks with various thicknesses, radiation leakage through the shield was measured by an ionization chamber type survey meter during continuous and constant supply of 15O gas of 1.85 GBq/min concentration which is the maximum dose for clinical use. The leakage radiation measured was 213.7, 56.0, 15.3, 5.0 muSv/week for lead shield with 1, 2, 3, and 4 cm thickness, respectively, and 193.3, 30.5 and 5.1 muSv/week for concrete shields with thickness of 10, 20, and 30 cm, respectively. The present study shows that to keep less than 300 muSv/week, which is the permissible dose rate of the boundary zone around the radiation controlled area by Japan Science and Technology Agency, it is required to use more than 8 mm thick lead shield or 7 cm thick concrete for continuous supply of 1.85 GBq/min 15O gas.     

Solvent free synthesis of polyaniline-clay nanocomposites from mechanochemically intercalated anilinium fluoride

Nanocomposites consisting of conducting polyaniline and clay minerals were successfully synthesized from mechanochemically intercalated anilinium fluoride; the nanocomposites prepared by the mechanochemical intercalation method contained much more polyaniline in the clay layers than those prepared by a conventional solution method.     

Dissociation equilibrium between uncharged and charged local anesthetic lidocaine in a surface-adsorbed film

The dissociation equilibrium between uncharged local anesthetic lidocaine (LC) and charged local anesthetic LC (LCH⁺) in a surface-adsorbed film was investigated by measuring the surface tension and pH of aqueous solutions of a mixture of hydrochloric acid and LC. The surface tension values decreased slightly with increasing total molality m_t at 0X₂0.5, where X₂ is the mole fraction of LC in the mixture, while they decreased rapidly with increasing m_t at 0.5<X₂1. It was shown from the pH measurements that almost all LC molecules were changed into LCH⁺ ions by protonation at 0X₂0.5 and both forms coexisted only at 0.5<X₂1. The quantities of the respective LC and LCH⁺ transferred from the aqueous solution to the adsorbed film, i.e., their surface densities, were calculated by applying the thermodynamic equations derived to the surface tension and pH data. A greater quantity of LC than LCH⁺ existed in the adsorbed film at the coexisting composition. The partitioning behavior of LC and LCH⁺ in the adsorbed film was characterized by three composition regions: (1) slight partitioning of low surface-active LCH⁺ in the region at 0X₂0.5, (2) preferential partitioning of LC at 0.5<X₂<around 0.7, and (3) negative partitioning of LCH⁺ at around 0.7X₂1. The present results clearly indicate that uncharged local anesthetics transfer into hydrophobic environments such as cell membranes more than charged ones.     

An improved method for synthesizing antennary β-d-mannopyranosyl disaccharide units

The merits of an indirect protecting method for hydroxyl groups using allyl groups via allyloxycarbonyl groups in the synthesis of antennary β-d-mannopyranosyl disaccharides from β-d-galactopyranosyl disaccharides were studied. Regioselective allyloxycarbonylation and conversion reactions involving simultaneous double S_N2 nucleophilic substitution at C-2′ and C-4′ of benzyl O-[β-d-galactopyranosyl]-(1-4)-3,6-di-O-benzyl-2-deoxy-2-N-phthalimido-β-d-glucopyranoside were examined for comparison with the direct allylation method. The required β-d-mannopyranosyl disaccharide having proper protecting groups was obtained using this indirect method in 52% yield. In contrast, the reported direct allylation method using methyl O-(β-d-galactopyranosyl) disaccharide gave the corresponding β-d-mannopyranosyl disaccharide in only 7.5% yield.     

Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

Generation of 6-(Trifluoromethyl)-4,5-dihydro-2(3H)-pyridone and the Application to Synthesis of Some Fused Nitrogen Heterocycles Carrying a Trifluoromethyl Group on the Bridgehead Position via Radical Cyclization of Dihydropyridones

Staudinger/aza-Wittig reaction of 6,6,6-trifluoro-5-oxohexanoyl azide with PPh(3) or PBu(3) was examined. A reactive intermediate acyl imine 1 was trapped by methanol. Without nucleophile, isomerized enamide form 3 was obtained. N-Iodobenzoylation and N-haloalkylation of 3 and following radical cyclization via the 5-exo or 6-exo mode gave benzoindolizidinone, indolizidinone, and quinolizidinone derivatives 10-14, which have a trifluoromethyl group at the bridgehead position adjacent to nitrogen. Although LiAlH(4) reduction of 10 and 11 gave a mixture of saturated benzoindolizidine 15 and amino alcohol 16, reduction with BH(3)/THF selectively gave the desired 15 and indolizidine 17 from 13.     

Synthesis of chitosan resin possessing 3,4-diamino benzoic acid moiety for the collection/concentration of arsenic and selenium in water samples and their measurement by inductively coupled plasma-mass spectrometry

A chitosan resin functionalized with 3,4-diamino benzoic acid (CCTS-DBA resin) was newly synthesized by using a cross-linked chitosan (CCTS) as base material. The adsorption behavior of trace amounts of elements on the CCTS-DBA resin was examined by the pretreatment with a mini-column and measurement of the elements by inductively coupled plasma-Mass spectrometry (ICP-MS). Arsenic(V) could be retained on the CCTS-DBA resin at pH 3 as an oxoanion of H₂AsO₄⁻. Selenium(VI) is strongly adsorbed at pH 2 and pH 3 as an oxoanion of SeO₄²⁻, while selenium(IV) as HSeO₃⁻ is adsorbed on the resin at pH 3. The sorption capacities are 82, 64, and 88 mg g⁻¹resin for As(V), Se(IV), and Se(VI), respectively. The effect of common anions and cations on the adsorption of As(V), Se(IV), and Se(VI) were studied; there was no interference from such anionic matrices as chloride, sulfate, phosphate, and nitrate up to 20 ppm, as well as from such artificial river water matrices as Na, K, Mg, and Ca after passing samples through the mini-column containing the resin. The CCTS-DBA resin was applied to the collection of arsenic and selenium species in bottled drinking water, tap water, and river water.