Exchange interaction in covalently bonded biradical-monoradical composite molecules

As a novel molecular designing for genuinely organic molecule-based ferrimagnets, we have proposed a strategy of "single-component ferrimagnetics". When a pi-biradical with an S = 1 ground state and a pi-monoradical with S = (1)/(2) are united by sigma-bonds, the pi-conjugation between the biradical and the monoradical moieties should be truncated in the resultant triradical. This gives magnetic degrees of freedom for both S = 1 and (1)/(2) in the single molecule, serving as a building block for organic molecule-based ferrimagnets under favorable conditions (single-component ferrimagnetics). We have designed and synthesized a triradical, 3-(1'-oxyl-3'-oxido-4',4',5',5'-tetramethylimidazolin-2-yl)benzoic acid 2,4-bis(1' '-oxyl-3' '-oxido-4' ',4' ',5' ',5' '-tetramethylimidazolin-2-yl)phenyl ester (4), as a model compound for the novel approach to genuinely organic ferrimagnets. In the triradical 4, a m-phenylene-bis(nitronyl nitroxide) biradical with a triplet (S = 1) ground state is united with a phenyl nitronyl nitroxide monoradical (S = (1)/(2)) by an ester coupler. Solution-phase ESR spectra from 4 exhibited a complex hyperfine splitting due to (14)N and (1)H nuclei. The analysis of the hyperfine structure based on perturbation calculations has revealed that the exchange interaction within the biradical moiety is much larger than those between the biradical and the monoradical moieties and the magnetic degrees of freedom for both S = 1 and (1)/(2) are retained in 4. An X-ray crystal structure analysis showed that the triradical molecules are arranged in a one-dimensional molecular chain in the crystal. The magnetic susceptibility in a crystalline solid state is consistent with the crystal structure.     

Bioaccumulation of Antimony by Chlorella vulgaris and the Association Mode of Antimony in the Cell

The bioaccumulation and excretion of antimony by the freshwater alga Chlorella vulgaris , which had been isolated from an arsenic-polluted environment, are described. When this alga was cultured in a medium containing 50 μg cm⁻³ of antimony(III) for 14 days, it was found that Chlorella vulgaris bioaccumulated antimony at concentrations up to 12 000 μg Sb g⁻¹ dry wt after six days' incubation. The antimony concentration in Chlorella vulgaris decreased from 2570 to 1610 μg Sb g⁻¹ dry wt after the cells were transferred to an antimony-free medium. We found that the excreted antimony consists of 40% antimony(V) and 60% antimony(III). This means that the highly toxic antimony(III) was converted to the less toxic antimony (V) by the living organism. Antimony accumulated in living Chlorella vulgaris cells was solvent-fractionated with chloroform/methanol (2:1), and the extract residue was fractionated with 1% sodium dodecyl sulfate (SDS). Gel-filtration chromatography of the solubilized part showed that antimony was combined with proteins whose molecular weight was around 4×10⁴ in the antimony-accumulated living cells. © 1997 by John Wiley & Sons, Ltd.     

Acylzirconocene Chloride as an “Unmasked” Acyl Anion

Under mild conditions the acyl group of acylzirconocene chloride 1 formed from an alkene or alkyne and [(C₅H₅)₂ZrHCl] reacts as an “unmasked” acyl anion. The Lewis acid mediated reactions with aldehydes that yield α-ketol products in high yields demonstrate the versatility of this reagent for C–C coupling.     

Surface aggregation structure and surface mechanical properties of binary polymer blend thin films

During preparation of very thin polymer belnd films from a solution of polymers, the phase‐separated structures which are quite different from that observed for the bulk blend film was observed. From atomic force microscopic(AFM) observation, it is concluded that the surface undulation, which reflects the phase separated morphology of the blend system, is present. In the case of (polystyrene(PS)/poly(methyl methacrylate)(PMMA)) blend system, a large influence of end‐group chemistry on the surface morphology was observed. The phase identification of the (rubbery polymer/glassy polymer) binary blend thin films was successfully achieved by scanning vioscoelasticity microsopy(SVM).     

Metabolism of methylated arsenic compounds by arsenic-resistant bacteria (Klebsiella oxytoca and Xanthomonas sp.)

Two bacteria exhibiting resistance to toxic arsenic were isolated. These had been contaminated with arsenic in a Chlorella sp. culture medium containing arsenic. The two bacteria were identified as Klebsiella oxytoca and Xanthomonas sp., and grew well in a peptone medium at neutral pH at 30°C, reaching the stationary phase in ca 100h and 70h, respectively. The growth of the bacteria was not affected by arsenic(V) concentrations in the medium as high as 1000mg dm^?3. The bacteria bioaccumulated arsenic, a part of the arsenic being methylated. The bioaccumulation exhibited its peak around the turing point from the log phase to the stationary phase. The relative content of methylated arsenic in the excrement was greater than that in the bacterial cells. Adaptation treatment of inorganic arsenic caused an increase in the bioaccumulation of inorganic arsenic by K. oxytoca. Such a situation was not observed in the case of Xanthomonas sp. The bacteria also bioaccumulated methylated arsenic compounds, and demethylation of these species was observed. When the bacteria were killed by ethanol, arsenic was not taken up by the cells.     

Color Center Laser–Microwave Double Resonance Spectroscopy of the ν1Vibrational State of HCCF

Rotational transitions of fluoroacetylene in the ν₁(CH stretch) vibrational state have been observed by the laser–microwave double resonance technique using a color center laser as a radiation source in the 3 μm region. The rotational constant and centrifugal distortion constant in the ν₁state were determined to be 9684.310(16) MHz and 2.68(62) kHz, respectively, where the uncertainties given in parentheses correspond to 2.5 standard deviations.     

Bidentate coordination effect on polycondensation of amino acid esters between metal triflates and methoxy groups

To study the bidentate coordination effect on the polycondensation of L ‐valinates between metal triflates as a Lewis acid and methoxy groups, we carried out the polycondensation of 2‐methoxy‐4‐nitrophenyl L ‐valinate ( 1a ) and 2‐methoxyphenyl L ‐valinate ( 1b ) in the presence of the various kinds of rare‐earth triflates in DMF solution at room temperature. The polymerizations of 1a did not proceed without any metal triflates. In the presence of 5 mol% triflates, especially Sc(OTf)₃, the polymerization proceeded effectively. After the reaction mixture was poured into water, the product was collected, which was recognized as poly(L ‐valine)s by FTIR spectrum and GPC measurement. The yield of the product from the polymerization of 1a with Sc(OTf)₃ was higher than that from the polymerization of 4‐nitrophenyl L ‐valinate ( 1c ) with Sc(OTf)₃. This result indicates that the polymerization of 1a was promoted to introduce the methoxy group on the o‐position of the phenyl ring at the ester group with the aim of the bidentate coordination effect between metal triflates and L ‐valinate. As a control experiment, we carried out the polycondensation of 1b in the presence of 5 mol% metal triflates; however, any polymerization did not proceeded. That reason is from the lower activity of activated L ‐valinate ( 1b ). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2864–2868, 2008     

Cationic ring‐opening copolymerization behavior of trioxane and seven‐membered cyclic carbonate

Cationic ring‐opening copolymerization behavior of trioxane (TOX) and a seven‐membered cyclic carbonate, 1,3‐dioxepan‐2‐one (7CC) is described. When TOX and 7CC were cationically copolymerized under various feed ratios using trifluoromethane sulfonic acid (TfOH) as an initiator in nitrobenzene at 30 °C, 7CC was consumed faster than TOX and the decarboxylation was accompanied to afford the corresponding polyacetal–polycarbonate type copolymers containing poly(oxytetramethylene) units. The copolymer composition could be controlled by the feed ratio of 7CC, whose increase resulted in the high copolymer composition of the 7CC unit. The solubility of the copolymers increased as the increase of the 7CC content. Thermogravimetric, size‐exclusion chromatographic, and X‐ray analyses of the copolymers suggest that the sequences of the copolymer chains consist of the segments containing the units originated from 7CC and those with TOX unit‐rich compositions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 733–739, 2008     

Differential scanning calorimetry study on thermal behaviors of freeze‐dried poly(L‐lactide) from dilute solutions

Glass transition, cold crystallization, and melting of freeze‐dried poly(L‐lactide) (PLLA) prepared from dilute 1,4‐dioxane solutions were investigated by differential scanning calorimetry (DSC). Conventional DSC measurements of heating scans revealed that freeze‐dried PLLA prepared from a 0.07 wt % solution undergoes a two‐step cold crystallization (or reorganization) with a lower exotherm appearing at about 78 °C and with a higher broad exotherm between 110–155 °C. The peak temperature of the former exotherm is about 50 K lower than that observed for a reference bulk sample. Step‐scan mode DSC, which provides information essentially equivalent to that obtained from the temperature‐modulated DSC, revealed that the glass‐transition temperature is about 6 K lower than that of the reference bulk. These findings suggest enhanced chain mobility for freeze‐dried PLLA. Freeze‐dried PLLA that crystallized at 80 °C for 40 min was revealed to contain a rather large amount of rigid amorphous material (42%). © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 115–124, 2005