Synthesis of new linear polymers containing phosphorus atom in the main chain by the radical polyaddition: Addition polymers of phenylphosphine with 1,4-divinylbenzene or 1,4-diisopropenylbenzene and their properties

A polyaddition of phenylphosphine (PH) to 1,4-divinylbenzene (DVB) or 1,4-diisopropenylbenzene (DIPB) was carried out by radical initiations or UV irradiation at 60–80°C in toluene under a nitrogen atmosphere. The soluble polymer with higher molecular weight () was obtained in a high yield with AIBN initiator for 95 h in the presence of 5% excess of PH to DVB (monomer feed ratio [DVB]₀/[PH]₀ = 1/1.05). On the other hand, a polyaddition of PH to DIPB proceeded much slower than the case of DVB, but the high polymer was obtained in a high yield by choosing polyaddition conditions such as polyaddition temperature and initiator concentration. From ¹H-NMR, IR analyses, and phosphorus content of the polymers, it was characterized that both polymers have the alternating structure consisting of PH and DVB or DIPB units in 1 : 1 ratio. The glass transition and decomposition temperatures of both polymers under a nitrogen atmosphere were almost similar: 15–30°C and 380–385°C, respectively; but, the polymers were oxidized by heating under an atmosphere of air. The polymers had a self-extinguishing property and the polymer blend of the flammable polymers such as polystyrene and polyethylene with the phosphorus-containing polymers exhibited an excellent flame resistance. © 1994 John Wiley & Sons, Inc.     

Species-specific isotope dilution analysis of mono-, di,and tri-butyltin compounds in sediment using gas chromatography-inductively coupled plasma mass spectrometry with synthesized 118Sn-enriched butyltins

A species-specific isotope dilution (ID) method is described for the determination of mono-, di, and tri-butyltin compounds in sediment by gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS), where the mixture of 118Sn-enriched butyltin compounds synthesized in our laboratory was used as a spike. A correction method for the mass bias, a quantitative extraction of the butyltins from sediment, and an assay for the concentration of the standard solution for the reverse ID procedure were investigated to achieve a reliable ID analysis. The spike solution was added with tri-propyltin (TPrT), and the butyltins were extracted by mechanical shaking into acetic acid-tropolone-toluene. The extracted butyltins were ethylated with sodium tetraethylborate and measured by GC-ICP-MS. The mass bias correction factor for the butyltins was calculated with the measured area ratio of 120Sn/118Sn of TPrT in each chromatographic run, and the correction was carried out. The mass bias was well corrected with this in-run correction (the standard uncertainties of the corrected 120Sn/118Sn for the butyltins were in the range 0.03-0.45%, typically 0.25%, with triplicate measurement corresponding to 0.02-0.37% mass bias). The extraction efficiency of mono-butyltin (MBT) from sediment was improved by using tropolone-toluene as the solvent. Well-defined standard solutions for the reverse-ID procedure could be obtained by an assay for the purities of the natural abundance butyltin chloride reagents used for preparing the standard solutions. Overall uncertainties associated with the present method were estimated, where the sediment certified reference materials, PACS-2 and BCR 646, were analyzed. The uncertainty arising from the extraction was the main contributor to the overall uncertainties for MBT and di-butyltin (DBT) determinations, while with the case of tri-butyltin (TBT) determination the uncertainties arising from the purity of TBT chloride reagent used for preparing the standard solution was a large contributor to the overall uncertainties although the uncertainty arising from the extraction was also a main contributor. The analytical results of MBT, DBT, and TBT in both reference materials, except for MBT results in PACS-2, were in good agreement with the certified values in each. The result of MBT in PACS-2 (0.677 +/- 0.049 microg g(-1) as tin, mean +/- expanded uncertainty) was significantly higher than the certified value (0.45 +/- 0.05 microg g(-1)), but closely matched with the lately reported values (Rajendran, Tao, Nakazato and Miyazaki, Analyst, 2000, 125, 1757: 0.62 +/- 0.02 microg g(-1); Chiron, Roy, Cottier and Jeannot, J. Chromatogr. A, 2000, 879, 137: 0.634 +/- 0.082 microg g(-1); Alonso, Encinar, Gonzalez and Sanz-Medal, Anal. Bioanal. Chem., 2002, 373, 432: 0.64 +/- 0.04 microg g(-1). The present method is concluded to be reliable for the determination of MBT, DBT, and TBT in sediment.     

Development of a novel nucleoside analogue with S-type sugar conformation: 2′-deoxy-trans-3′,4′-bridged nucleic acids

Two novel trans-3′,4′-bridged nucleic acid (trans-3′,4′-BNA) monomers, one with a 3,5,8-trioxabicyclo[5.3.0]decane structure and the other with a 4,7-dioxabicyclo[4.3.0]nonane structure, were successfully synthesized from thymidine. The locked trans-fused ring structures of the nucleoside analogues were confirmed by X-ray crystallography, which also indicated that their furanose rings had a typical S-type conformation involving C_2′-endo or C_3′-exo sugar puckering, respectively, and the same ring conformation as that observed in the B-type helical structure of the DNA duplex.     

Certification of mono-, di-, and tributyltin compounds in marine sediment certified reference material by species-specific isotope dilution mass spectrometric analysis using synthesized <Superscript>118</Superscript>Sn-labeled butyltins

A new marine sediment reference material (NMIJ CRM 7301-a) for butyltins analysis was prepared and certified by the National Metrological Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). The original material of the sediment was collected at a bay near industrial activities in Japan. The sediment material was air-dried, sieved, homogenized, and packaged into 1,000 glass bottles (60 g each). Certification of NMIJ CRM 7301-a was carried out at NMIJ using two different types of species-specific isotope dilution mass spectrometry: isotope dilution–ethylation–gas chromatography/inductively coupled plasma mass spectrometry (GC/ICPMS) and isotope dilution–ethylation–gas chromatography/mass spectrometry (GC/MS). A mixture of ¹¹⁸Sn-enriched monobutyltin, dibutyltin, and tributyltin was synthesized in our laboratory and was used as a spike for both techniques. Certified values are given for tributyltin (0.044±0.004 mg kg^–1 as Sn), dibutyltin (0.056±0.006 mg kg^–1 as Sn, and monobutyltin (0.058±0.013 mg kg^–1 as Sn), being at lower levels than currently available sediment CRMs for the analysis of organotins.     

Creation of the nuclear alignment and theG-parity conservation law in weak nucleon currents

-ray angular distributions from nuclear spin aligned¹²B and¹²N were detected and the correlation coefficients were determined. From the comparison of these with the experimental weak magnetism term, it was concluded that the parity of the weak nucleon currents in the iso-spin space was strictly conserved.     

Synthesis and biological activities of optical isomers of 2-(4-chlorophenyl)-5,6-dihydro-(1)benzothiepino[5,4-c]pyridazin-3(2H)-o ne 7-oxide.

Two enantiomers of 2-(4-chlorophenyl)-5,6-dihydro-(1)benzothiepino[5,4- c]pyridazin-3(2H)-one 7-oxide ((+/-)-1: Y-23684) were synthesized in high yields by asymmetric oxidation of the synthetic precursor (2) using modified Sharpless reagent. Among the oxidants tested, cumene hydroperoxide (CHP) gave the highest optical and chemical yields, while tert-butyl, tert-amyl, and 1,1,3,3-tetramethylbutyl hydroperoxides did not show such high enantio-selectivities. The absolute configuration of (+)-1 enantiomer synthesized from 2, Ti(O-iso-Pr)4, (-)-diethyl tartarate, and CHP was determined to be S by X-ray crystallographic analysis. Both enantiomers, S-(+)-1 and R-(-)-1, and (+/-)-1 had approximately equivalent in vivo activities to antibicuculline test in mice and anticonflict test in rats, although S-( + )-1 showed about three times higher affinity to benzodiazepine receptor than R-(-)-1 in [3H]diazepam binding assay.     

Detection of LacZ‐Positive Cells in Living Tissue with Single‐Cell Resolution

The LacZ gene, which encodes Escherichia coli β‐galactosidase, is widely used as a marker for cells with targeted gene expression or disruption. However, it has been difficult to detect lacZ‐positive cells in living organisms or tissues at single‐cell resolution, limiting the utility of existing lacZ reporters. Herein we present a newly developed fluorogenic β‐galactosidase substrate suitable for labeling live cells in culture, as well as in living tissues. This precisely functionalized fluorescent probe exhibited dramatic activation of fluorescence upon reaction with the enzyme, remained inside cells by anchoring itself to intracellular proteins, and provided single‐cell resolution. Neurons labeled with this probe preserved spontaneous firing, which was enhanced by application of ligands of receptors expressed in the cells, suggesting that this probe would be applicable to investigate functions of targeted cells in living tissues and organisms.     

On-chip fuel cell: micro direct methanol fuel cell of an air-breathing, membraneless, and monolithic design

This paper proposes a novel design for a microfuel cell as an on-chip power source and demonstrates its fabrication and operation to prove the concept. Its simple design is important from the viewpoints of fabrication (e.g., replication), integration, and compatibility with other microdevices. In testing, the prototype cell was able to generate electric power (maximum: ca. 1.4 microW) on methanol without pumps under both neutral and acidic conditions. As for the size, the electrode part of the cell (two cathodes and one anode) is 400 microns in width and 6 mm in length. The evaluation demonstrated that the proposed design is a promising on-chip power source for miniature devices.