Determination of low-molecular-weight carboxylic acids in aqueous samples by gas chromatography and nitrogen-selective detection of 2-nitrophenylhydrazides

A gas chromatographic method was developed for the determination of low-molecular-weight carboxylic acids in aqueous samples based on a derivatization procedure compatible with aqueous solutions. The technique uses nitrogen-selective detection with a thermionic-specific detector after derivatization of carboxylic acids as 2- nitrophenylhydrazides. The hydrazides were extracted with ethyl acetate prior to injection into the gas chromatograph. The derivatives appear to be stable in ethyl acetate at 0–5° C for long periods and, therefore, can be stored for analysis at a later date. The detection limits of different short-chain acids are in the range 0.8–1.4 pmol per injected sample. The relative standard deviation is less than 10% at the 1 μM level. Examples of the use of the method are given for the determination of carboxylic acids in anoxic marine sediment pore waters, coastal sea water and Black Sea water samples.     

A simplified synthesis of the hexamethylplatinate(IV) ion

Tetra-n-butylammonium hexachloroplatinate (IV) reacts with lithium methyl/lithium iodide in ether to give a solution containing lithium hexamethylplatinate (IV). With lithium methyl/lithium bromide in ether however, tetrabutylammonium hexamethylplatinate (IV) is precipitated together with lithium halides. Solid [Bu₄N)₂[Pt(Ch₃)₆] is stable under nitrogen at room temperature, but ether solutions of [Pt(Ch₃)₆]^2- decompose in a few minutes at room temperature in the absence of excess lithium methyl.     

A general and efficient synthesis of sulfonylbenzotriazoles from N-chlorobenzotriazole and sulfinic acid salts

One-pot reactions of sulfinic acid salts (produced from organometallic reagents with SO2) with N-chlorobenzotriazole gave the corresponding N-alkane-, N-arene-, and N-heteroenesulfonylbenzotriazoles 3a-j in 41-93% yields. Reagents 3a-j are efficient sulfonylating agents, reacting at 20-80 degrees C with various primary and secondary aliphatic amines to yield the corresponding sulfonamides in 64-100% yields.     

Flow-injection amperometric determination of oxalate with immobilized oxalate oxidase

Oxalate is immobilized on controlled-pore glass and is used on-line in a glass minicolumn (2.5×25 mm). The hydrogen peroxide formed is detected amperometrically. Oxalate (6×10^?6?9×10^?4 M) is determined in a flowing stream of pH 3.5 citrate (or succinate) buffer. As little as 20 ng (in 40 μl; 5.7×10^?6 M) of oxalate can be detected. Copper inhibition can be removed either by adding EDTA to the carrier stream or incorporating a chelating-resin minicolumn into the flow system prior to the enzyme column.     

The synthesis of N-substituted ketimines from oxazirdines

N-Unsubstituted diaryl, alkyl aryl and dialkyl ketimines are prepared in good yield at ambient temperature by the reaction of KOBu^t on oxaziridines having an α-hydrogen atom on the N-alkyl substituent; the mechanism and stereochemistry of the reaction are discussed.     

Time-dependent pump-probe spectra of NeBr2

Time- and frequency-resolved pump-probe measurements on NeBr2 have been performed to better characterize its fragmentation dynamics on the B electronic state for vibrational levels in the energy region of the transition from direct vibrational predissociation to intramolecular vibrational relaxation dynamics. Above nu'=20 of the Br2 stretching mode, it was observed that the dependence of lifetime on the vibrational quantum number deviates from the energy-gap law by leveling off in the range of 10 psE transitions of the complex. These transitions are shifted 20 cm(-1) to lower energy from the free Br2 resonances, indicating an E state Ne-Br2 bond energy of 82 cm(-1). Measurements of NeBr2 vibrational predissociation via the delta nu=-2 channel were also performed for nu'=27, 28, and 29. The closing of the delta nu=-1 channel leads to an increase in the lifetimes of these vibrational levels. A new Nd:yttrium aluminum garnet pumped dual optical parametric oscillator/optical parametric amplifier system is described that allows us to conveniently record time-delayed pump-probe spectra with 2-cm(-1) spectral resolution and 15-ps time resolution.     

Aerobic oxidation of methyl p-tolyl sulfide catalyzed by a remarkably labile heteroscorpionate RuII-aqua complex,fac-[RuII(H2O)(dpp)(tppm)]2+

fac-[RuII(Cl)(dpp)(L3)]+ (L3 = tris(pyrid-2-yl)methoxymethane (tpmm) = [1A]+ and tris(pyrid-2-yl)pentoxymethane (tppm) = [1B]+ and dpp = di(pyrazol-1-yl)propane) rapidly undergo ligand substitution with water to form fac-[RuII(H2O)(dpp)(L3)]2+ (L3 = tpmm = [2A]2+ and tppm = [2B]2+). In the structure of [2A]2+, the distorted octahedral arrangement of ligands around Ru is evident by a long Ru(1)-O(40) of 2.172(3) A and a large angle O(40)-Ru(1)-N(51) of 96.95(14) degrees . The remarkably short distance between O(40) of H2O and H(45a) of dpp confirms the heteroscorpionate ligand effect of dpp on H2O. [2B]2+ aerobically catalyzes methyl p-tolyl sulfide to methyl p-tolyl sulfoxide in 1,2-dichlorobenzene at 25.0 +/- 0.1 degrees C under 11.4 psi of O2. Experimental facts in support of this aerobic sulfide oxidation are the absence of H2O2 and the oxidative reactivity of the putative Ru(IV)-oxo intermediate toward methyl p-tolyl sulfide, 2-propanol, and allyl alcohol. This study provides the first documented example of aerobic-sulfide oxidation catalyzed by the remarkably labile heteroscorpionate Ru(II)-aqua complex without the formation of a highly reactive peroxide as an intermediate.     

Flow-injection determination of sulphite and assay of sulphite oxidase

Sulphite (1–80 × 10^?5 M) in formaldehyde-stabilized solutions is determined by injection into a flowing stream of pH 8.5 phosphate buffer, passing through a mini-column of sulphite oxidase immobilized on controlled-pore glass, with amperometric detection of the hydrogen peroxide produced. Sulphite oxidase (5–100 U l^?) is determined by injection into a flowing stream of formaldehyde-stabilized 2 × 10^?3 M sodium sulphite in pH 8.0 phosphate buffer; hydrogen peroxide is again monitored.     

Basis set and density functional dependence of vibrational Raman optical activity calculations

We present an extensive investigation of the dependence of the scattering intensity difference of right and left circularly polarized light observed in vibrational Raman optical activity (VROA) on the choice of basis set and exchange-correlation functional. These dependencies are investigated for five molecules for which accurate experimental data are available: (S)-methyloxirane, (R)-epichlorhydrin, (S)-glycidol, (M)-spiro[2,2]pentane-1,4-diene, and (M)-sigma-[4]-helicene. Calculations are presented using the SVWN exchange-correlation functional (LDA), the BLYP exchange-correlation functional, and the B3LYP hybrid functional, using six different basis sets: the cc-pVDZ, cc-pVTZ, aug-cc-pVDZ, aug-cc-pVTZ, Sadlej's polarized basis set, and a minimal VROA basis set recently proposed by Zuber and Hug. It is demonstrated that results from pure gradient-corrected and hybrid functionals are comparable and that the aug-cc-pVDZ and aug-cc-pVTZ basis sets yield similar results. Furthermore, the combination of the small basis set by Zuber and Hug with an accurate force field represents the best compromise between computational accuracy and computational efficiency.     

Synthesis and characterisation of a series of alkylmagnesium amide and related oxygen-contaminated "alkoxy" compounds

Synthesised either by an unusual tert-butyl metathesis between tert-butyllithium and a n,s-butylmagnesium amide or by reaction of an alkyl Grignard reagent and a sodium amide, five tert-butylmagnesium amides, Bu(t)MgDBA (5)(DBA=dibenzylamide), Bu(t)MgDA (6)(DA=diisopropylamide), Bu(t)MgHMDS (7)(HMDS=1,1,1,3,3,3-hexamethyldisilazide), Bu(t)MgTMP (8)(TMP=2,2,6,6-tetramethylpiperidide) and Bu(t)MgNCy2 (9)(cy=cyclohexyl) have been isolated as crystalline solids. All five amides have been characterised by X-ray crystallography and solution NMR spectroscopic studies. The former studies reveal a common dimeric molecular structure with amido bridges in a planar (MgN)2 ring and terminal Bu(t) ligands on the Mg atoms. Also described is the dodecameric primary amide [Bu(n)MgN(H)Dipp]12 (10a) and its monomeric solvate Bu(n)MgN(H)Dipp.TMEDA (10b)(Dipp=2,6-diisopropylphenyl; TMEDA=N,N,N',N'-tetramethylethylenediamine). The crystal structures of the oxo-insertion products Bu(t)MgOBu(t).THF (11), Bu(t)Mg(mu-OBu(t))(mu-TMP)MgTMP (12) and Mg(OBu(n))HMDS.solv [solv=THF (13a) or Et2O (13b)], made fortuitously during the course of this work, are also presented.