Acceleration effects of 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene with 2‐methylimidazole‐intercalated α‐zirconium phosphate as a latent thermal initiator in the reaction of glycidyl phenyl ether and hexahydro‐4‐methylphthalic anhydride

The catalytic effects of 1,5,7‐Triazabicyclo[4.4.0]dec‐5‐ene (TBD) with 2‐methylimidazole‐intercalated α‐zirconium phosphate (α‐ZrP?2MIm) in the reaction of glycidyl phenyl ether (GPE) and hexahydro‐4‐methylphthalic anhydride (MHHPA) were investigated. The reaction did not proceed within 1 h at 60 °C. On increasing the temperature to 100 °C, the conversion reached 93% for 1 h. Without the addition of TBD, the conversion was 67% at 100 °C for 1 h. Under storage conditions at 25 °C for 7 days, the conversion of GPE was only 18%. The curing behavior of 2,2‐bis(4‐glycidyloxyphenyl)propane (DGEBA) and MHHPA in the presence of TBD with α‐ZrP?2MIm was evaluated by differential scanning calorimetry. The addition of TBD with α‐ZrP?2MIm as a latent thermal initiator, the storage stability was maintained and the reaction proceeded rapidly under heating conditions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2557–2561     

A single-molecule enzymatic assay in a directly accessible femtoliter droplet array

The enzyme assay in a femtoliter chamber array is a simple and efficient method for concentrating the reaction product; it greatly improves the detection sensitivity down to the single-molecule level. However, in previous methods, controlling the initiation and termination of the reaction in each chamber is difficult once enclosed. Furthermore, the recovery of the enzyme and product is also difficult. To overcome these drawbacks, we developed a femtoliter droplet array in which the individual droplets are fixed on the substrate and are directly accessible from outside. A hydrophilic-in-hydrophobic micropatterned surface was used for the preparation of the droplets. When the aqueous solution on the surface is exchanged with oil, the hydrophilic surface retains the aqueous solution, and more than 10(6) dome-shaped droplets that are usable for further assay can be prepared simultaneously. The curvature radius of the droplet obeys the Young-Laplace equation, and the volume can be precisely controlled by the micropipette, which applies pressure into the droplet. Changing the pressure makes the addition, collection, and exchange of the aqueous content for individual droplets possible. Using these advantages, we successfully measured the kinetic parameters of the single-molecule enzyme β-galactosidase and rotary motor protein F(1)-ATPase enclosed in a droplet.     

Mesoporous aluminosilicate-catalyzed allylation of aldehydes with allylsilanes

Mesoporous aluminosilicate (Al-MCM-41) was found to catalyze the allylation of both aromatic and aliphatic aldehydes with allylsilanes although amorphous silica-alumina or mesoporous silicates (MCM-41, SBA-15) could not catalyze the reaction under the same reaction conditions. The solid acid catalyst Al-MCM-41 could be reused three times without significant loss of activity.     

Polymer having a trithiocarbonate moiety in the main chain: Application to reversible addition–fragmentation chain transfer controlled thermal and photoinduced monomer insertion polymerizations

A polymer having a trithiocarbonate moiety in its main chain was synthesized with a cyclic, five‐membered dithiocarbonate as a building block. The trithiocarbonate in the polymer acted as a reversible addition–fragmentation chain transfer reagent to mediate a controlled insertion polymerization of styrene into the polymer main chain, giving the corresponding sequence‐ordered polymer having a well‐defined polystyrene segment in the main chain. During the polymerization, the polystyrene segment in the main chain gained its molecular weight, which maintained a linear relationship with the conversion of styrene. The insertion polymerization of styrene was induced not only thermally but also by ultraviolet irradiation. This photoinduced polymerization was well controlled by the trithiocarbonate moiety to give the corresponding polymer, whose structure was virtually the same as that obtained by the thermal polymerization. © 2006 Wiley Periodicals, Inc. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6324–6331, 2006     

N‐Boc‐Indolylbenzothiadiazole Derivatives: Efficient Full‐Color Solid‐State Fluorescence and Self‐Recovering Mechanochromic Luminescence

Herein, the solid‐state emission with good fluorescence quantum yields of N‐Boc‐indolylbenzothiadiazoles as a new class of fluorophores is described. Their solid‐state emission covers the wide range of the visible spectrum and the emission color can be tuned easily by changing the substituents on the two heteroaromatic rings. Among these, 3‐methylindolyl derivatives exhibit moreover autonomously self‐recovering mechanochromic luminescence, whereby the original solid‐state emission could be recovered spontaneously at room temperature after exposure to a mechanical stimulus. The emission color, as well as the recovery time for the color change could be tuned via the introduction of different substituents on the benzothiadiazole ring. We propose that the mechanism of the autonomously self‐recovering mechanochromic luminescence of 3‐methylindolylbenzothiadiazoles is based on a partial amorphization of the crystals upon exposure to the mechanical stimulus, followed by autonomous recovering in the form of recrystallization.     

A query efficient non‐adaptive long code test with perfect completeness

Long Code testing is a fundamental problem in the area of property testing and hardness of approximation. In this paper, we study how small the soundness s of the Long Code test with perfect completeness can be by using non‐adaptive q queries. We show that s = (2q + 3)/2^q is possible, where q is of the form for any integer k > 2. © 2014 Wiley Periodicals, Inc. Random Struct. Alg., 47, 386–406, 2015     

Rare direct imidation of aromatic metallacycle by reaction of CpCo(dithiolene) complex with N-halosuccinimide

The aromatic [CpCo(S₂C₂(R)(H))] (R = Ph, Me, 9-phenanthryl, H) complexes reacted with N-halosuccinimides (NXS; X = Cl, Br, I) in carbon tetrachloride at room temperature to undergo the N-succinimide substitution reaction on the dithiolene ring, but no halogenated dithiolene complex was obtained. The imidation products [CpCo(S₂C₂(R)(N-sccinimide))] were yielded up to 64% where X = I and R = 9-phenanthryl. The reaction of [CpCo(S₂C₂(Ph)(H))] with N-bromophthalimide (NBP) also gave the imidation product [CpCo(S₂C₂(Ph)(N-phthalimide))]. This is the rare direct imidation reaction to an aromatic metallacycle by NXS. The reaction of [CpCo(S₂C₂H₂)] (R = H) with NIS afforded the double imidation product. One by-product in this reaction was the dithiolene-dithiolene homo-coupling product [CpCo(S₂C₂(R))]₂ (R = Ph, Me, 9-phenanthryl). The microwave-enhanced (MW) reactions were attempted in the carbon tetrachloride solution. Although the solution temperature increased up to only 43 °C by MW irradiation, the imidation reaction worked with short reaction time.     

Micro-channel fabrication by femtosecond laser to arrange neuronal cells on multi-electrode arrays

The surface of a single-crystal germanium wafer was transformed to crystals of germanium fluorides and oxides upon exposure to a vapor of HF and HNO₃ chemical mixture. Structure analysis indicates that the transformation results in a germanate polycrystalline layer consisting of germanium oxide and ammonium fluogermanate with preferential crystal growth orientation in 〈101〉 direction. Local vibrational mode analysis confirms the presence of N–H and Ge–F vibrational modes in addition to Ge–O stretching modes. Energy dispersive studies reveal the presence of hexagonal α-phase GeO₂ crystal clusters and ammonium fluogermanates around these clusters in addition to a surface oxide layer. Electronic band structure as probed by ellipsometry has been associated with the germanium oxide crystals and disorder-induced band tailing effects at the interface of the germanate layer and the bulk Ge wafer. The acid vapor exposure causes Ge surface to emit yellow photoluminescence at room temperature.