Synthesis of racemic and optically active forms of lineatin,the unique tricyclic pheromone of trypodendron lineatum (olivier)

(±) - 33,7 - Trimethyl - 2,9 - dioxatricyclo[3.3.1.0^4,7]nonane 1 and (±) - 3,3,7 - trimethyl - 2,9-dioxatricyclo [4.2.1.0^4,7]nonane 2 were synthesized. The former was shown to be (±)-lineatin, an ambrosia beetle pheromone. A selective synthesis of (±)-lineatin was devised, which was modified to yield the both enantiomers of lineatin via optical resolution of an intermediate.     

Magnetic structure of the europium fulleride ferromagnet Eu(6)C(60)

The powder neutron diffraction technique has been used for the direct observation of magnetic scattering below a Curie temperature of approximately 14 K in the fullerene-based molecular ferromagnet Eu6C60. Europium is in the divalent state with a magnetic moment of 7.1(3) muB per atom, and the configurational symmetry of the magnetic structure is body-centered cubic. Close contacts between Eu2+ and neighboring C60 units provide the signature of orbital hybridization, which can evidently account for the conducting and magnetic properties of the material.     

The synthesis of hexahydrooxoepithiopyridinedicarboximides by the reaction of thioamides with N-substituted maleimides

The synthesis of hexahydrooxoepithiopyridinedicarboxyimide (5: X₂ = N-Ph) by the reaction of thioamides 1 with N-substituted maleimide ( 2a ) was examined. The reaction of primary thioamides, such as thiobenzamide and p-toluthioamide with N-phenylmaleimide gives compounds 5 together with corresponding 4-hydroxy-1,3-thiazoles 4 . However, a similar reaction of secondary thioamides, such as N-methylthioacetamide, thiobenzanilide, with N-phenylmaleimide did not provide compounds 5 without addition of acid. The reaction pathway and the configuration of 5 were also investigated.     

Rhodium-catalyzed addition of arylboron compounds to nitriles, ketones, and imines

The rhodium-catalyzed addition reactions of sodium tetraphenylborate and arylboronic acids to nitriles, ketones, and imines were examined. The reaction of nitriles could be carried out efficiently in the presence of a catalyst system of [RhCl(cod)]₂-dppp and H₂O to give the corresponding monoarylated products selectively. Although unactivated ketones and imines are known to be poor electrophiles for rhodium-catalyzed arylation, the phenylation of them with use of sodium tetraphenylborate proceeded smoothly in the presence of [RhCl(cod)]₂ and Rh(acac)(cod) as catalysts, respectively. The addition of NH₄Cl was found to be crucial to effectively conduct the reaction of ketones and imines.     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

Catalytic transformation of methane over in-loaded ZSM-5 zeolite in the presence of ethene

Methane is shown to react with ethene over In-loaded ZSM-5 to higher hydrocarbons such as propene and toluene at around 673 K. Such methane conversion is not catalyzed by proton-exchanged ZSM-5 (H-ZSM-5) under the same conditions, only C2H4 being converted to higher hydrocarbons. By using 13C-labeled methane (13CH4) as a reactant, the reaction paths for the formation of propene, benzene and toluene were examined. 13C-labeled propene (13CC2H6) is formed by the reaction of 13CH4 with C2H4. The lack of 13C-labeled benzene revealed that propene is not transformed to benzene, which instead originates entirely from C2H4. The 13C atom is inserted both into the methyl group and benzene ring in the toluene formed. This indicates that toluene is formed by two reaction paths; the reaction of 13CC2H6 with butenes formed by the dimerization of C2H4 and the reaction of benzene with 13CH4. The existence of the latter path was proved by the direct reaction of 13CH4 with benzene. The reaction of methane with benzene was also carried out in a continuous flow system over In-loaded ZSM-5. The reaction afforded 7.6% and 0.9% yields of toluene and xylenes, respectively, at 623 K.     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Absolute configuration of (-)-biflora-4,10(19),15-triene,a diterpene from a termite soldier,as determined by the synthesis of its (1R, 6S, 7S, 11R)-(+)-isomer

(1R, 6S, 7S, 11R)-(+)-Biflora-4, 10(19),15-triene was synthesized starting from (r)-(+)-citronellic acid. This enabled us to assign (1S), 6R, 7R, (11S)-stereochemistry to the naturally occurring (-)-enantiomer isolated from soldiers of the termite species Cubitermes umbratus.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Cyclophanes as hosts for aromatic and aliphatic guests

A series of water-soluble cyclophanes, made by connecting two diarylmethane units and two bridging chains via four nitrogens, were found to provide hydrophobic cavities of definite shape and size for forming inclusion complexes with various organic compounds in aqueous solution. Some chemical modifications of these cyclophanes are described.This paper is dedicated to Professor D. J. Cram to celebrate his honor in receiving the 1987 Nobel Prize in Chemistry.