Data extrapolation method for boundary element method-based near-field acoustical holography

A new data extrapolation method for boundary element method (BEM)-based near-field acoustical holography (NAH) is proposed to reduce an error of the reconstructed result obtained from the pressure measured on an aperture small compared with the structure. The finiteness of the measurement aperture is a serious impediment to actual large-scale implementation of NAH, because NAH requires the measurement of the pressure field over a complete surface of structure. To eliminate the requirement, the wave number-space data extrapolation method for fast Fourier transform (FFT)-based NAH has been proposed. In this paper, the extension of this data extrapolation method to BEM-based NAH is presented. The effectiveness of this method is demonstrated by experiments. The experiment results confirm that the reconstruction error is sufficiently suppressed by the proposed method.     

Thermosensitive poly(methyl methacrylate) emulsion prepared in the presence of poly(vinyl alcohol) with a cloud point as a protective colloid

An emulsion of poly(methyl methacrylate) (PMMA) was prepared using poly(vinyl alcohol) (PVA) of low degree of hydrolysis with a cloud point as a protective colloid. The behaviour of an aqueous solution of PVA with 80% degree of hydrolysis was first investigated in terms of the Huggins constant in viscometry. MMA was polymerized using the PVA at 20 °C, where no abnormality in the aqueous PVA was observed. The change in transmittance of the emulsion observed with a UV–vis photometer revealed that in the case of UV light of wavelength 370 nm, the transmittance decreased markedly at around 30 °C with an increase in temperature, and then increased with a decrease in temperature. The thermosensitive property resulted from PVA with a low degree of hydrolysis with a cloud point, at a higher temperature of which the PVA loses solubility in water owing to weakening of the hydrogen bond between PVA molecules and water.     

Magnetic ordering of dangling bond networks on hydrogen-deposited Si(111) surfaces

Based on total-energy electronic-structure calculations within the density-functional theory, we find that a high spin state is realized for an ultimate dangling bond unit on an otherwise hydrogen-covered Si(111) surface. We further propose a systematic method of constructing nanometer-scale dangling bond networks that exhibit the ferrimagnetic spin ordering. The interplay between the electron-electron interaction and the surface reconstruction is elucidated.     

Integration of a piezoelectric transformer and an ultrasonic motor

Ultrasonic motors are usually operated at an AC voltage higher than a regular battery. This implies the need of a voltage step-up transformer. In this paper, we report the integration of a piezoelectric transformer (PT) with an ultrasonic motor and a simple drive circuit. The stator of the ultrasonic motor and the PT were operated in the same radial vibration mode. Their dimensions were very close to each other yielding nearly matching resonance frequencies. Consequently, they could be combined together without inductor. The drive circuit was designed by using a 555 timer as an astable multivibrator, and high-speed dual MOSFET drivers as a class D half-bridge switching amplifier. This integrated PT-ultrasonic motor performed reasonably without the use of electromagnetic transformer or inductor.     

Group-velocity-matched cascaded quadratic nonlinearities of femtosecond pulses in periodically poled MgO:LiNbO3

Large nonlinear phase shifts were generated with femtosecond pulses at 1560 nm through cascaded quadratic interactions in periodically poled MgO-doped LiNbO3. The off-diagonal component of the nonlinear coefficient was utilized for simultaneous quasi phase matching and group-velocity matching. The effective nonlinear refractive index was varied from -2.9 x 10(-14) to +3.3 x 10(-14) cm2/W by tuning the phase-mismatch conditions.     

Acoustic characteristics of an electrodynamic planar digital loudspeaker

In this paper, an electrodynamic planar loudspeaker driven by a digital signal is experimentally discussed. The digital loudspeaker consists of 22 voice coils, 11 permanent magnets, a diaphragm with streamlined sections molded in plastic, and a suspension made of handmade Japanese paper between the diaphragm and the frame. First, the acoustic responses are affected by the arrangement of the voice coils, so an asymmetric arrangement is studied. This asymmetric arrangement is designed to obtain as flat a frequency response to an analog signal as possible. This arrangement is compared with a symmetric one and results show that the flatness of the frequency response around 1 kHz and 4 kHz is improved and that the sound reproduction band is from 40 Hz to 10 kHz. Second, to evaluate the acoustic responses to a digital signal, the digital loudspeaker is driven with a pulse code modulation signal. Results show that the digital loudspeaker can reproduce pure sound with a total harmonic distortion of less than 5% from 40 Hz to 10 kHz, exceeding this value only in a narrow frequency band near 4 kHz. This digital loudspeaker was demonstrated to have good linearity over its dynamic range of 84 dB.     

Charge transport in the insulating state of (DMe-DCNQI)2Li above T(SP): a possible fractional charge soliton conduction with +/-1 / 2e

A spin-Peierls system (DMe-DCNQI)2Li is studied with W-band electron paramagnetic resonance (EPR) ( approximately 94 GHz) to unveil a charge transport mechanism in the insulating 4k(F) charge density wave state above T(SP). The electron hopping between the neighbor DCNQI columns provides an additional broadening of the EPR linewidth, since the neighbor columns are generally nonequivalent to each other with respect to g shift. The obtained intercolumn hopping rates lead us to the conclusion that the electron hopping to a hole soliton carrying a fractional charge of e / 2 in the neighbor column dominates the intercolumn charge transport.     

Improved direct measurement of the parity-violation parameter Ab using a mass tag and momentum-weighted track charge

We present an improved direct measurement of the parity-violation parameter A(b) in the Z boson-b-quark coupling using a self-calibrating track-charge technique applied to a sample enriched in Z-->bb events via the topological reconstruction of the B hadron mass. Manipulation of the Stanford Linear Collider electron-beam polarization permits the measurement of A(b) to be made independently of other Z-pole coupling parameters. From the 1996-1998 sample of 400,000 hadronic Z decays, produced with an average beam polarization of 73.4%, we find A(b)=0.906+/-0.022(stat)+/-0.023(syst).     

Direct observations of freeze-etching processes of ice-embedded biomembranes by atomic force microscopy

We have fabricated a cryogenic atomic force microscope that is designed for structural investigation of freeze-fractured biological specimens. The apparatus is operated in liquid nitrogen gas at atmospheric pressure. Freeze-fracturing, freeze-etching and subsequent imaging are carried out in the same chamber, so that the surface topography of a fractured plane is easily visualized without ice contamination. A controlled superficial sublimation of volatile molecules allows us to obtain three-dimensional views of ultrastructures of biological membranes.     

Plakevulin A, a new oxylipin inhibiting DNA polymerases α and γ from sponge Plakortis species

A new cytotoxic oxylipin, plakevulin A (1), possessing a cyclopentene ring and a levulinyl ester has been isolated from an Okinawan marine sponge Plakortis sp. The structure was elucidated on the basis of spectroscopic data, and the absolute configurations at three chiral centers were assigned by spectroscopic data of the reductive product of 1 and a modified Mosher's method. Plakevulin A (1) exhibited inhibitory activity against DNA polymerases α and γ.