Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

High pressure FTIR study of intramolecular hydrogen bonding and conformation of a small peptide in solution

Effect of pressure on conformational equilibria of a small peptide N-acetyl-l-Pro-l-Leu-Gly-NH₂ in a chloroform solution has been studied by FTIR spectroscopy. Absorption in the NH stretching region was measured at pressures in the 1–1080 bar range and at 296 K, and decomposed into component bands by least-squares fitting. Intensity ratios of bands which were assigned to a hydrogen-bond-free conformer and intramolecularly hydrogen-bonded conformers with 10- and 13-membered hydrogen bonded rings, respectively, were examined as a function of pressure. It was found that the conformer with the 13-membered ring has definitely smaller partial molar volume than the other two conformers which have nearly the same volume with each other. On the basis of a simple dielectric model, we have shown that the conformer with the 13-membered hydrogen-bonded ring has a considerably large dipole moment which is consistent with the α-helical structure suggested by the previous variable-temperature FTIR study.     

Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.     

Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Synthesis of 2-alkylidenetetrahydrofurans by Ru-catalyzed regio- and stereoselective codimerization of dihydrofurans with alpha,beta-unsaturated esters

2-(1-Alkoxycarbonyl)alkylidenetetrahydrofurans were readily synthesized by the codimerization of 2,3- or 2,5-dihydrofurans with alpha,beta-unsaturated esters using a zerovalent Ru catalyst, Ru(cod)(cot), with high regio- and stereoselectivity.     

Stereoselective synthesis of 4-hydroxy-2-phenylproline framework

Highly diastereoselective (>20:1) bromo-lactonization of N-sulfonyl-2-allyl-2-phenylglycine methyl ester (11) was observed. Successive treatment of the chiral lactone with MeONa gave the desired (2S,4R)-4-hydroxy-2-phenylproline derivative in high yield without erosion of the diastereoselectivity. The starting chiral non-racemic compound (5) was prepared from the racemic 2-phenylglycine using a classical kinetic resolution (crystallization), an asymmetric phase transfer alkylation, and an enzyme-catalyzed kinetic resolution.     

GENERATION AND PARTICIPATION OF O-2 IN 2-NITROPROPANE DIOXYGENASE REACTION

Abstract— 2-Nitropropane dioxygenase (EC 1. 13. 11) of the yeast Hansenula mrakii catalyzes the oxygenative denitrification of 2-nitropropane as follows:

The enzyme is significantly inhibited by superoxide dismutase and various scavengers for superoxide such as cytochrome c , epinephrine, thiols and polyhydric phenols. The scavengers added to the reaction mixture were oxidized or reduced. The addition of superoxide dismutase and the omission of 2-nitropropane or oxygen prevented the oxidation and the reduction of the scavengers. The enzyme catalyzes the formation of nitrite from 2-nitropropane by KO₂ added anaerobically.
One mole of NADH is bound per mole of the enzyme and predominantly the pro-R hydrogen of bound NADH is transferred to superoxide formed enzymatically or provided externally. The enzyme shows incomplete stereospecificity for hydrogen transfer from NADH.     

Hydration structure around a non-electrolyte molecule as revealed by monte carlo calculation: have you seen the “iceberg”?

Monte Carlo calculations have been carried out for pure water and an infinitely dilute aqueous solution of methanol at 298.15 K at ordinary density by the Metropolis method in NTV ensemble. The hydration structure around methanol revealed by a graphic display technique indicates a structure-forming effect near the hydrophobic group.     

Reactions of group IV organometallic compounds : XXVII. Some reactions of [(trimethylsilyl)imino]phosphorane

The reaction of [(trimethylsilyl)imino]methyldiphenylphosphorane: Ph₂MePNSiMe₃ (I) with several acid anhydrides or alkyl isocyanates took place by the simple cleavage of silicon-nitrogen bond. In contrast the interaction of (I) with phenyl isocyanate, isothiocyanate or carbon disulphide led to addition-elimination reactions of the Wittig type. Detailed investigation in the case of phenyl isocyanate indicated the usual elimination of Ph₂MePO is suppressed by the strong affinity of the trimethylsilyl group for anionic oxygen atom.