High density excitons in tracks of energetic charged particles in CuCl

The luminescence induced by heavy charged particle irradiation has been measured. The bi-exciton lines (M_T and M_L) and the line at 3926 Å were observed. It is concluded that these lines arise from the densely excited region in particle tracks.     

Crystal growth of Co ferrite on fine acicular γ-Fe2O3 particles

Highly coercive magnetic powder was obtained by growing cobalt ferrite on the surface of γ-Fe₂O₃ particles in highly alkaline suspensions containing cobalt and ferrous ions in a Co/Fe molar ratio = $\text{1}\text{2}$. The mechanism of the growth and the structure of cobalt ferrite on γ-Fe₂O₃ were studied by X-ray diffraction and electron diffraction techniques. Results show that crystals of cobalt ferrite CoFe₂O₄ with a spinel type crystal structure of lattice constant 8.415 Å grew epitaxially on γ-Fe₂O₃. The acicular direction of the epitaxially grown Co-γ-Fe₂O₃ as well as γ-Fe₂O₃ was in the [$\text{1}$01] direction. It was found that from the lattice constant value and the half width of X-ray diffraction peaks, the lattice constant epitaxially grown Co γ-Fe₂O₃ may be attributed to two kinds of crystals, viz., seed γ-Fe₂O₃ ($\text{a = 8.35 ～ 8.37}\text{A}\text{?}$) which was partly reduced to Fe₃O₄, and surface layer CoFe₂O₄ ($\text{a = 8.415}\text{A}\text{?}$). The crystal growth in the interface between the seed crystals and the growth layer was affected by the crystal structure of the seed crystals. The lattice constant of CoFe₂O₄ which was located in the vicinity of the interface was almost equal to that of the seed crystals.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

High-repetition-rate 12 fs pulse amplification by a Ti:sapphire regenerative amplifier system

We demonstrate the direct generation of 12 fs pulses from a Ti:sapphire regenerative amplifier system at a 1 kHz repetition rate utilizing properly designed broadband components for chirped-pulse amplification. Optimized designs of a regenerative amplifier with a multilayer gain-narrowing compensator and an adaptive dispersion compensator with a spatial light modulator contribute to the shorter pulse amplification.     

Quarkonia at Finite T: An Approach Based On QCD Sum Rules and the Maximum Entropy Method

Quarkonium spectral functions at finite temperature are studied, making use of a recently developed method of analyzing QCD sum rules by the maximum entropy method. This approach enables us to directly obtain the spectral function from the sum rules, without having to introduce any specific assumption about its functional form. QCD sum rules for heavy quarkonia incorporate finite temperature effects in form of changing values of the various gluonic condensates that appear in the operator product expansion. These changes depend on the energy density and pressure at finite temperature, which we extract from quenched lattice QCD calculations. As a result, it is found that the charmonium ground states of both S-wave and P-wave channels dissolve into the continuum already at temperatures around or slightly above the critical temperature T _c , while the bottomonium states are less influenced by temperature effects, surviving up to about 2.5 T _c or higher for S-wave and about 2.0 T _c for P-wave states.     

Improved direct measurement of the parity-violation parameter Ab using a mass tag and momentum-weighted track charge

We present an improved direct measurement of the parity-violation parameter A(b) in the Z boson-b-quark coupling using a self-calibrating track-charge technique applied to a sample enriched in Z-->bb events via the topological reconstruction of the B hadron mass. Manipulation of the Stanford Linear Collider electron-beam polarization permits the measurement of A(b) to be made independently of other Z-pole coupling parameters. From the 1996-1998 sample of 400,000 hadronic Z decays, produced with an average beam polarization of 73.4%, we find A(b)=0.906+/-0.022(stat)+/-0.023(syst).     

First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

Dominant modes of submerged thin cylindrical shells

The relationship between the dominant mode of the submerged thin cylindrical shell and the flexural wave velocity is investigated. The natural frequency corresponding to the vibration mode is obtained as the solution of characteristic equation of thin cylindrical shell. However, it is difficult to estimate the dominant mode, especially if two or more vibration modes are involved. To estimate the dominant mode of a thin shell in vacuo, the concept of “modified bending stiffness” has been introduced. In this paper, the concept of modified bending stiffness is extended to estimate the dominant mode of a submerged thin cylindrical shell. The dominant mode of a submerged thin cylindrical shell is theoretically discriminated from the other mode based on the smallness of the modified bending stiffness of the submerged shell. The validity of our theory is confirmed by a good agreement between theoretical and experimental results on flexural wave velocity.     

ICTS measurements for p-GaN Schottky contacts

High-temperature isothermal capacitance transient spectroscopy (H-ICTS) measurements were conducted to characterize near mid-gap defects, which are the origin of the memory effect in Ni/p-GaN Schottky contacts. A large single peak was detected only under the forward bias conditions. This indicates that the defects were located in the vicinity of the interface. The change of the peak height and position of the ICTS curves under various bias conditions were qualitatively interpreted by the distribution of the defects and the current flow effect.     

Entropy production per site in (nonreversible) spin-flip processes

Entropy production per site in a (nonreversible) spin-flip process is studied. We give it a useful expression, from which a property stronger than affinity of the entropy production per site follows. Furthermore, quasi-invariance of nonequilibrium measures in the spin-flip processes is discussed via entropy production.