Diamond-like carbon films prepared by pulsed-laser evaporation

Diamond-like carbon thin films were prepared by pulsed-laser evaporation. In this method a carbon target was irradiated by a XeCl laser with a power density of 3×10⁸ W/cm² and carbon atoms, together with a small number of ions, were produced. Deposition rates and film properties changed sensitively with substrate temperature. The films deposited at 50°C were diamond-like, having reasonable hardness, high refractive index (2.1–2.2 at 633 nm), optical transparency in the infrared, electrical resistivity of 10⁸ cm and chemical inertness (no dissolution in a HFHNO₃ solution). The band gap measured from optical absorption was 1.4 eV. Raman spectrum and infrared absorption, whose features varied with the substrate temperature, were also measured. The films were amorphous and no crystallinity was observed, as confirmed by x-ray diffraction, transmission electron diffraction and Raman spectroscopy. Hydrogen atoms were incorporated in the films with a typical H/C ratio of 0.3. The application of a negative bias to the substrate modified the deposition due to the presence of ions.     

Chemical and biological modification of bleomycin,an antitumor antibiotic

Dedicated to Professor John C. Sheehan on the occasion of his sixty-fifth birthday. Chemical and biological modifications of bleomycin, an antitumor glycopeptide antibiotic, have been achieved by three procedures analogous to the modifications of penicillin.     

Factors affecting polyhydroxybutyrate biosynthesis in the marine photosynthetic bacteriumRhodopseudomonas sp. strain W-1S

Applied Biochemistry and Biotechnology - A marine photosynthetic bacterium,Rhodopseudomonas sp. strain W-1S, accumulated polyhydroxybutyrate (PHB) to 56% of the dry cell weight under microaerobic...     

Local dynamic mechanical properties in model free-standing polymer thin films

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(')G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

Formation and Physicochemical Features of Hybrid Threadlike Micelles in Aqueous Solution

We investigate the construction of long, stable hybrid threadlike micelles consisting of polyelectrolytes and oppositely charged surfactants in aqueous solution and examine the physicochemical features such as their structure and viscoelastic behavior in aqueous solution. The most important point for their construction is the careful control of interactions, especially electrostatic interactions, caused between the surfactants and polyelectrolytes. Incorporated polyelectrolytes are fully extended in these hybrid threadlike micelles irrespective of the molecular weight of the polymer. The viscoelastic behavior of the hybrid threadlike micellar solution is similar to that of ordinary threadlike micellar systems consisting of low‐molecular‐weight substances. However, the inclusion of polymers in the micelles causes differences in their mechanical properties.     

X-ray crystal structure analyses and atomic charges of color former and developer. I. Color developers

The crystal and molecular structures of 2,2-bis(4-hydroxyphenyl)propane (Bisphenol A, BPA) (1), benzyl 4-hydroxybenzoate (2), 1,7-bis(4-hydroxyphenylthio)-3,5-dioxaheptane (3) and 4-hydroxyphenyl 4-isopropoxyphenyl sulfone (4) have been determined by X-ray crystal structure analysis. Theoretical calculations of the steric hindrance and semiempirical quantum chemical calculations to determine the color characteristics have been carried out. It is clear that the energy barriers for the variation of the orientation of phenol group in 1 to 4 are due to steric hindrance caused by the other moiety and the peak profiles are due to repulsive interactions of the other moiety. Net atomic charges on the hydrogen of the OH group are larger than those on the other atoms in the molecules. This high electron charge of the para orientation will cause the different thermosensitivity and stabilization.     

Study of a high-dimensional chaotic attractor

The nature of a very high-dimensional chaotic attractor in an infinite-dimensional phase space is examined for the purpose of studying the relationships between the physical processes occurring in the real space and the characteristics of high-dimensional attractor in the phase space. We introduce two complementary bases from which the attractor is observed, one the Lyapunov basis composed of the Lyapunov vectors and the another the Fourier basis composed of the Fourier modes. We introduce the exterior subspaces on the basis of the Lyapunov vectors and observe the chaotic motion projected onto these exteriors. It is shown that a certain statistical property of the projected motion changes markedly as the exterior subspace goes out of the attractor. The origin of such a phenomenon is attributed to more fundamental features of our attractor, which become manifest when the attractor is observed from the Lyapunov basis. A counterpart of the phenomenon can be observed also on the Fourier basis because there is a statistical one-to-one correspondence between the Lyapunov vectors and the Fourier modes. In particular, a statistical property of the high-pass filtered time series reflects clearly the difference between the interior and the exterior of the attractor.     

Photopolymerization of methyl methacrylate in the presence of tertiary amines

The sensitization effect of tertiary amines on the photopolymerization of methyl methacrylate was studied. N,N-Dimethylbenzylamine, triethylamine, and N,N-dimethylaniline increased the rate of polymerization in this order, but pyridine did not show any effect. A free-radical mechanism was confirmed by the tacticity of polymer, the retarding effect of hydroquinone, and the copolymer composition with styrene. On the basis of the detailed kinetics of the sensitized polymerization and the ultraviolet spectra of the reaction mixtures, a sensitization mechanism is proposed, in which the excited monomer and the amine form a complex and generate an initiating radical.