Capillary zone electrophoretic determination of iodide in seawater using transient isotachophoresis with artificial seawater as the background electrolyte

We describe an application of capillary zone electrophoresis (CZE) with transient isotachophoresis (ITP) as the on-line concentration procedure for the determination of iodide in seawater. The effective mobility of iodide was decreased by the addition of 10 mM cetyltrimethylammonium chloride (CTAC) to an artificial seawater background electrolyte (BGE) so that transient ITP functioned and iodide was separated from other coexisting anions such as bromide, nitrite, and nitrate in seawater samples. After sample injection, 600 mM acetate was separately injected into the capillary as the terminating ion to generate transient ITP. The limit of detection (LOD) for iodide was 3.0 microg/L. The LOD was obtained at a signal-to-noise ratio (S/N) of 3. The values of the relative standard deviation (RSD) of peak area, peak height, and migration time for iodide were 2.9, 2.1, and 0.6%. The proposed method was applied to the determination of iodide in seawater collected around the Osaka Bay. The results obtained by use of the calibration graph were agreed with those obtained by the addition of the standard solutions for iodide.     

On amide exchange reaction of polymide precursor

The reaction of poly(amic acid) (PAA) derived from pyromellitic dianhydride (PMDA) and oxydianiline (ODA) with 1-aminopyrene (APy) in solution as a model of amide exchange reaction between PAAs was studied in the temperature range of 0–60°C using viscometry and light-scattering (LS) measurements. The decrease in the weight-average molecular weight (M?_w) of PAA in N,N-dimethylacetamide (DMAc) solution with time and the acceleration of M?_w drop due to the increase in storage temperature or the addition of APy into PAA solution were observed. Apparent activation energies (E_a) for scission of PAA chains were similar: about 13 kcal/mol in PAA/DMAc and PAA/APy/DMAc, respectively. When stored at 60°C for a week, the number of scissions per polymer chain in PAA/DMAc is about 2, but is about 5 in PAA/DMAc with a large amount of APy. The result indicates that the M?_w drop accelerated by the addition of APy is attributed to amide exchange reaction between PAA Chains and monofunctional APy. It was concluded from the dependence of M?_w drop on Apy concentration that the exchange reaction between different PAA molecules during storage of PAA/PAA solution may scarcely occur under the conditions (storage time and temperature) used for preparation of PAA/PAA blends.     

Palladium- or ruthenium-catalyzed synthesis of 2-phenylindoles

Allyl α-phenyl-2-aminophenethyl carbonates undergo a smooth decarboxylation-dehydrogenation reaction to afford 2-phenylindole derivatives in acetonitrile at 80° in the presence of palladium complex as catalyst. In the reaction, the ruthenium hydride complex showed more effective catalytic activities. 2-Phenylindoles were also prepared from the corresponding α-phenyl-2-aminophenethylalcohols and allyl methyl carbonate by ruthenium-catalyzed cyclization.     

Novel synthesis of high molecular weight polymers with extremely low polydispersity by the unique initiation properties of organo-lanthanide complexes

Organolanthanide(III) complexes such as |(C₅Me5₅)₂SmH|₂ and (C₅Me₅)₂SmMe(THF) were found to initiate the living polymerizations of methyl methacrylate (MMA) to give high molecular weight polymers (M _n > 500 × 10³) with extremely low polydispersity (M _w/M_n = 1.04). The syndiotacticity increased up to 95.2% by lowering the temperature to −95°C. The molecular structure of the 1:2 adduct of (C₅Me₅)₂SmH with MMA determined by X-ray method indicates that this intermediate assumes the 8 membered ring conformation where the Sm atom is bound to MMA in an enolate form and the ester of penultimate MMA is coordinated to the metal. Based upon these results, an anionic coordination mechanism has been proposed for the present reaction. Organolanthanide(II) complexes also exhibit high activity and proceed the living polymerizations. Organolanthanide(III) complexes also initiate the living polymerizations of lactones such as ϵ-caprolactone and δ-valerolactone. The stoichiometric reactions indicate that real active species assumes the alkoxylanthanide(III) form.     

Measurement of temperature and velocity fields in a heater unit by liquid crystal thermometry and particle image velocimetry

Temperature and velocity fields in a heating unit for automobiles are measured through a model experiment in water tunnel using flow visualizations and image analysis to investigate the mixing mechanism of the flow that has passed through the heater and not passed through it inside the unit. The temperature fields are measured by the liquid crystal visualization technique combined with the field calibration using full color spline fitting technique, and the velocity fields are evaluated by a particle imaging technique with a cross-correlation algorithm. These results indicate an enhanced flow mixing at larger mix-door angles, which results in a shorter mixing distance of temperature and velocity downstream of the mix door. The enhanced flow mixing is caused by the high velocity fluctuations created by the flow separation over the mix door.     

Synthesis of a novel polymeric carbohydrate via regio‐ and stereoselective cyclopolymerization of 1,2:5,6‐dianhydrohexitol

The selective cyclopolymerization of 1,2:5,6‐dianhydrohexitols corresponding to diepoxides was a new synthetic strategy for polycarbohydrates, though the polymer is a lack of the anomeric linkage which is found in the naturally occurring polysaccharides. 1,2:5,6‐Dianhydro‐3,4‐di‐O‐methyl‐D‐mannitol, L‐iditol, and D‐glucitol were polymerized using t‐BuOK and BF₃·Oet₂ to produce the polymers consisting of five‐membered rings. On the other hand, the polymers consisting of six‐membered rings were obtained by the cationic and anionic polymerizations of meso allitol and galactitol monomers, respectively.     

Synthesis of end-functionalized (1 → 6)-2,5-anhydro-D-glucitols via anionic cyclopolymerization of 1,2:5,6-dianhydro-3,4-di-O-methyl-D-mannitol for preparing graft copolymers

End-functionalized (1→6)-2,5-anhydro-3,4-di-O-methyl-D-glucitols ( 3a–c ) were synthesized by the anionic cyclopolymerization of 1,2:5,6-dianhydro-3,4-di-O-methyl-D-mannitol ( 1 ), followed by treatment with a terminating agent such as 4-vinylbenzyl ( 2a ), oxetanyl ( 2b ), and methacryloyl group ( 2c ). The end-functionalization proceeded in a high efficiency at 73–98%. The radical copolymerization of styrene with 3a yielded a polymer ( 5a ) whose GPC trace exhibited a unimodal peak. 5a was polystyrene with (1→6)-2,5-anhydro-3,4-di-O-methyl-D -glucitol as pendant groups whose structure was confirmed by the ¹H NMR spectrum.     

Photophysical processes in aromatic polyimides. Studies with model compounds

Emission mechanism in an aromatic polyimide, PI(BPDA/PDA), derived from biphenyltetracarboxylic dianhydride and p-phenylene diamine were studied with ultraviolet visible absorption and fluorescence spectra of a series of the model compounds. The excitation spectrum of the intermolecular charge-transfer (CT) fluorescence peaking around 550 nm of PI(BPDA/PDA) thin film was completely consistent with the absorption spectrum, indicating that the intermolecular CT fluorescence emission of PI(BPDA/PDA) film is not caused by direct excitation of the CT absorption band, but by light absorption due to structural units in the polymer backbone. The UV-vis. absorption spectra of the model compounds corresponding to the structural units in PI(BPDA/PDA) showed that the longest wavelength absorption band is due to the biphenylbisimide moiety. The band was assigned as π, π* transition with the polarization spectrum of the model compound. The fluorescence spectra of the model compounds changed sensitively depending on the conformation around N-phenyl bond. The lifetime measurement for the model compounds suggested that intramolecular CT process occurs very rapidly. © 1993 John Wiley & Sons, Inc.