Photoemission study on the valence band of a β-FeSi2 thin film using synchrotron radiation

Resonant and constant-initial state photoemission spectroscopies using synchrotron radiation were applied to investigate the valence-band electronic structure of a semi-conducting β-type iron-disilicide (β-FeSi(2)) thin film. The results clearly indicated that the component elements, iron (Fe) and silicon (Si), contribute differently to the valence band features; the Fe 3d orbitals mainly concentrate in the top region of the valence band while the Si 3s and 3p orbitals spread over the wide region of the valence band. The β-FeSi(2) thin film showed a typical p-type semi-conducting nature with a work function of 4.78 eV. The β-FeSi(2) film showed the Fe M(1)VV Auger lines around the kinetic energy of 88 eV. It would be expected from these observations that there exist strong interactions between iron and silicon atoms in the β-FeSi(2) film resulting in orbital mixing and band formation.     

Thermo-responsive polymer brushes as intelligent biointerfaces: preparation via ATRP and characterization

PIPAAm-brush grafted glass substrates with various graft densities and chain lengths were prepared via surface-initiated ATRP. Temperature-dependent physicochemical properties of the surfaces were characterized by means of ATR/FT-IR spectroscopy, XPS, AFM, and contact angle measurements. ATRP conditions influence the amount of grafted PIPAAm and the surface wettability and roughness of the substrate. Fibronectin adsorption and EC adhesion increased with decreasing density of PIPAAm brushes. EC adhesion was diminished with increasing PIPAAm graft length. Thus, the preparation of PIPAAm brush surface with various graft densities and chain lengths using the surface-initiated ATRP is an effective method for modulating thermo-responsive properties of surfaces.     

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.     

Light-induced conformational change and product release in DNA repair by (6-4) photolyase

Proteins of the cryptochrome/photolyase family share high sequence similarities, common folds, and the flavin adenine dinucleotide (FAD) cofactor, but exhibit diverse physiological functions. Mammalian cryptochromes are essential regulatory components of the 24 h circadian clock, whereas (6-4) photolyases recognize and repair UV-induced DNA damage by using light energy absorbed by FAD. Despite increasing knowledge about physiological functions from genetic analyses, the molecular mechanisms and conformational dynamics involved in clock signaling and DNA repair remain poorly understood. The (6-4) photolyase, which has strikingly high similarity to human clock cryptochromes, is a prototypic biological system to study conformational dynamics of cryptochrome/photolyase family proteins. The entire light-dependent DNA repair process for (6-4) photolyase can be reproduced in a simple in vitro system. To decipher pivotal reactions of the common FAD cofactor, we accomplished time-resolved measurements of radical formation, diffusion, and protein conformational changes during light-dependent repair by full-length (6-4) photolyase on DNA carrying a single UV-induced damage. The (6-4) photolyase by itself showed significant volume changes after blue-light activation, indicating protein conformational changes distant from the flavin cofactor. A drastic diffusion change was observed only in the presence of both (6-4) photolyase and damaged DNA, and not for (6-4) photolyase alone or with undamaged DNA. Thus, we propose that this diffusion change reflects the rapid (50 μs time constant) dissociation of the protein from the repaired DNA product. Conformational changes with such fast turnover would likely enable DNA repair photolyases to access the entire genome in cells.     

Geochemical studies on the Chernobyl radioactivity in environmental samples

Artificial radionuclides in deposition and airborne dust samples in 1986 were measured at Tsukuba and 11 stations in Japan. In May 1986, the Chernobyl radioactivity was observed in rain and air samples in Japan. The Chernobyl-derived Pu isotopes, which are characterized by higher²³⁸Pu/^239,240Pu (85) and²⁴¹Pu/²³⁸Pu (0.5) activity ratios than those of the nuclear test-derived Pu and⁹⁰Sr, were detected in deposition and airborne dust samples in Japan, as well as volatile radionuclides such as¹³¹I and¹³⁷Cs. However, the activities of Pu isotopes and⁹⁰Sr observed in Japan were about two and three orders of magnitude lower than those expected from the activity ratios in the total release at Chernobyl, which means that the residence time of Pu in the air was shorter than that of¹³⁷Cs. In order to understand the fractionation between the Chernobyl radionuclides we studied about individual wet and dry deposition. The results suggest that this cause is due to the difference of the particle size of radionuclide-bearing particles, which may be related to the release process of Chernobyl radionuclides.     

Depolymerization of poly(2,6-dimethyl-1,4-phenylene oxide) under oxidative conditions

Depolymerization of an engineering plastic, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), was accomplished by using 2,6-dimethylphenol (DMP) under oxidative conditions. The addition of an excess amount of DMP to a solution of PPO in the presence of a CuCl/pyridine catalyst yielded oligomeric products. When PPO (M(n)=1.0x10(4), M(w)/M(n)=1.2) was allowed to react with a sufficient amount of DMP, the molecular weight of the product decreased to M(n)=4.9x10(2) (M(w)/M(n)=1.5). By a prolonged reaction with the oxidant, the oligomeric product was repolymerized to produce PPO essentially identical to the starting material, making the oligomer useful as a reusable resource. During the depolymerization reaction, an intermediate phenoxyl radical was observed by ESR spectroscopy. Kinetic analysis showed that the rate of the oxidation of PPO was about 10 times higher than that of DMP. These results show that a monomeric phenoxyl radical attacks the polymeric phenoxyl to induce the redistribution via a quinone ketal intermediate, leading to the substantial decrease in the molecular weight of PPO, which is much faster than the chain growth.     

Plutonium isotopes in the surface air in Japan: Effect of Chernobyl accident

Plutonium isotope concentrations in the surface air at Tsukuba, Japan are reported during the period from 1981 to the end of 1986. The^239,240Pu concentration in the surface air, which showed a marked seasonal variation with a spring maximum and fall minimum, decreased until the end of 1985 according to the stratospheric residence time of 1.15 years. In May 1986, elevated^239,240Pu concentrations with high²³⁸Pu/^239,240Pu activity ratios were observed. The serial trend of plutonium concentration in the surface air is similar to the concentrations of the Chernobyl-released radionuclides. These findings suggest that a significant part of the plutonium in the surface air in May 1986 was due to the Chernobyl fallout. The size distribution of plutonium bearing particles indicates that plutonium isotopes were mechanically released in the Chernobyl accident. The surface air concentration of plutonium from the Chernobyl accident was much lower than the concentrations of the volatile fission products, and increased the monthly mean^239,240Pu concentration by only 0.03 Bqm^–3.     

Combined analysis of microwave and infrared spectra of methyl iodide: rotational and l-type doubling constants of the v5, v3+v6 and v2 states

The rotational constant B and the l-type doubling constant q were determined for the v₅, v₃+v₆ and v₂, states of CH₂I from the microwave transition frequencies, in combination with the infrared data previously reported. Since these vibrational states were coupled through the Fermi resonance and the xy-type E-E and A₁-E Coriolis resonances, the analysis was made by setting up and solving the complete form of the secular determinants of the energy matrices. The rotational and l-type doubling constants were determined as B₅, = 0.250 173 cm^?1, B₃₆ = 0.247 600 cm^?1, B₂ = 0.249 369 cm^?1, q₅ = ?0.000 027 cm^?1 and q₃₆ = ?0.000 179 cm^?1, which are unperturbed by Fermi and Coriolis interactions. Other band constants for v₅ and v₃+v₆ were also refined in accordance with the new values of B₅ and B₃₆. The present study indicated that the combined analysis of microwave and infrared spectral data was useful for the precise determination of vibration-rotation, levels in the perturbed system.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.