Adsorption and micellization behavior of novel gluconamide-type gemini surfactants

The adsorption and micellization behavior of novel sugar-based gemini surfactants (N,N(')-dialkyl-N,N(')-digluconamide ethylenediamine, Glu(n)-2-Glu(n), where n is the hydrocarbon chain length of 8, 10 and 12) has been studied on the basis of static/dynamic surface tension, fluorescence, dynamic light scattering (DLS) and cryogenic transmission electron microscope (cryo-TEM) data. The static surface tension of the aqueous Glu(n)-2-Glu(n) solutions measured at the critical micelle concentration (cmc) is observed to be significantly lower than that of the corresponding monomeric surfactants. This suggests that the gemini surfactants, newly synthesized in the current study, are able to form a closely packed monolayer film at the air/aqueous solution interface. The greater ability in the molecular association is supported by the remarkably (approximately 100-200 times) lower cmc of the gemini surfactants compared with the corresponding monomeric ones. With a combination of the fluorescence and DLS data, a structural transformation of the Glu(n)-2-Glu(n) micelles is suggested to occur with an increase in the concentration. The cryo-TEM measurements clearly confirm the formation of worm-like micelles of Glu(12)-2-Glu(12) at the concentration well above the cmc.     

Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces

We have prepared various poly(N-isopropylacrylamide) (PIPAAm)-grafted silica bead surfaces through surface-initiated atom transfer radical polymerization (ATRP) by changing graft densities and brush chain lengths. The prepared surfaces were characterized by chromatographic analysis using the modified silica beads as chromatographic stationary phases. ATRP initiator (2-(m,p-chloromethylphenyl)ethyltrichlorosilane) density on silica bead surfaces was modulated by changing the feed composition of the self-assembled monolayers (SAMs) of mixed silane coupling agents consisting of ATRP initiator and phenethyltrichlorosilane on the surfaces. IPAAm was then polymerized on SAM-modified silica bead surfaces by ATRP in 2-propanol at 25 degrees C. The chain length of the grafted PIPAAm was controlled by simply changing the ATRP reaction time at constant catalyst concentration. The thermoresponsive surface properties of the PIPAAm-grafted silica beads were investigated by temperature-dependent elution behavior of hydrophobic steroids from the surfaces using Milli-Q water as a mobile phase. On the surfaces grafted with shorter PIPAAm chains, longer retention times for steroids were observed on sparsely grafted PIPAAm surfaces compared to dense PIPAAm brushes at low temperature, because of hydrophobic interactions between the exposed phenethyl groups of SAMs on silica surfaces and steroid molecules. Retention times for steroids on dilute PIPAAm chain columns decreased with temperature similarly to conventional reverse-phase chromatographic modes on octadecyl columns. This effect was due to limited interaction of solutes with the PIPAAm-grafted surfaces. Retention times for steroids on dilute PIPAAm brush surfaces with longer PIPAAm chains became greater above the PIPAAm transition temperature. At low-temperature regions, hydrated and expanded PIPAAm at low temperatures prevented hydrophobic interactions between the phenethyl group of SAMs on the silica bead surfaces and steroid molecules. Retention times for steroids on a dense PIPAAm brush column increased with temperature since solvated polymer segments within the dense brush layer undergo dehydration over a broad range of temperatures. In conclusion, PIPAAm graft density has a crucial influence on the elution behavior of steroids because of the interaction of analytes with silica bead interfaces, and because of the characteristic dehydration of PIPAAm in dense-pack brush surfaces.     

Hybrid micelle formation from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) and Fe3+ ion in aqueous solution

Organic–inorganic nanohybrid particles are prepared in aqueous solution from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) (PEO-b-PAMPS-b-PS) triblock copolymer and ferric ions. The hybrid micelles were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, and zeta-potential measurements. The hydrodynamic diameter of the hybrid micelles ranges from 68 to 118 nm depending on the concentration of the polymer and the amount of ferric ions loaded on the polymer. Zeta-potential measurements revealed that the micelles are assembled mainly by electrostatic interaction between the ferric ions and the negatively charged PAMPS block in the PEO-b-PAMPS-b-PS.     

Glucose concentration determination based on silica sol-gel encapsulated glucose oxidase optical biosensor arrays

Optical biosensor arrays for rapidly determining the glucose concentrations in a large number of beverage and blood samples were developed by immobilizing glucose oxidase (GOD) on oxygen sensor layer. Glucose oxidase was first encapsulated in silica based gels through sol-gel approach and then immobilized on 96-well microarrays integrated with oxygen sensing film at the bottom. The oxygen sensing film was made of an organically modified silica film (ORMOSIL) doped with tris(4,7-diphenyl-1,10-phenanthroline) ruthenium dichloride (Ru(dpp)₃Cl₂). The oxidation reaction of glucose by glucose oxidase could be monitored through fluorescence intensity enhancement due to the oxygen consumption in the reaction. The luminescence changing rate evaluated by the dynamic transient method (DTM) was correlated with the glucose concentration with the wide linear range from 0.1 to 5.0 mM (Y = 13.28X − 0.128, R = 0.9968) and low detection limit (0.06 mM). The effects of pH and coexisting ions were systemically studied. The results showed that the optical biosensor arrays worked under a wide range of pH value, and normal interfering species such as Na⁺, K⁺, Cl⁻, PO₄³⁻, and ascorbic acid did not cause apparent interference on the measurement. The activity of glucose oxidase was mostly retained even after 2-month storage, indicating their long-term stability.     

Luminescence enhancement of Eu, Ce co-doped Ba3Si5O13−δNδ phosphors

Host lattice Ba₃Si₅O_13−δN_δ oxonitridosilicates have been synthesized by the traditional solid state reaction method. The lattice structure is based on layers of vertex-linked SiO₄ tetrahedrons and Ba²⁺ ions, where each Ba²⁺ ion is coordinated by eight oxygen atoms forming distorted square antiprisms. Under an excitation wavelength of 365 nm, Ba₃Si₅O_13−δN_δ:Eu²⁺ and Ba₃Si₅O_13−δN_δ:Eu²⁺,Ce³⁺ show broad emission bands from about 400-620 nm, with maxima at about 480 nm and half-peak width of around 130 nm. The emission intensity is strongly enhanced by co-doping Ce³⁺ ions into the Ba₃Si₅O_13−δN_δ:Eu²⁺ phosphor, which could be explained by energy transfer. The excitation band from the near UV to the blue light region confirms the possibility that Ba₃Si₅O_13−δN_δ:Eu²⁺, Ce³⁺ could be used as a phosphor for white LEDs.     

Oriented reconstitution of a membrane protein in a giant unilamellar vesicle: experimental verification with the potassium channel KcsA

We report a method for the successful reconstitution of the KcsA potassium channel with either an outside-out or inside-out orientation in giant unilamellar vesicles, using the droplet-transfer technique. The procedure is rather simple. First, we prepared water-in-oil droplets lined with a lipid monolayer. When solubilized KcsA was encapsulated in the droplet, it accumulated at monolayers of phosphatidylglycerol (PG) and phosphoethanolamine (PE) but not at a monolayer of phosphatidylcholine (PC). The droplet was then transferred through an oil/water interface having a preformed monolayer. The interface monolayer covered the droplet so as to generate a bilayer vesicle. By creating chemically different lipid monolayers at the droplet and oil/water interface, we obtained vesicles with asymmetric lipid compositions in the outer and inner leaflets. KcsA was spontaneously inserted into vesicles from the inside or outside, and this was accelerated in vesicles that contained PE or PG. Integrated insertion into the vesicle membrane and the KcsA orientation were examined by functional assay, exploiting the pH sensitivity of the opening of the KcsA when the pH-sensitive cytoplasmic domain (CPD) faces toward acidic media. KcsA loaded from the inside of the PG-containing vesicles becomes permeable only when the intravesicular pH is acidic, and the KcsA loaded from the outside becomes permeable when the extravesicular pH is acidic. Therefore, the internal or external insertion of KcsA leads to an outside-out or inside-out configuration so as to retain its hydrophilic CPD in the added aqueous side. The CPD-truncated KcsA exhibited a random orientation, supporting the idea that the CPD determines the orientation. Further application of the droplet-transfer method is promising for the reconstitution of other types of membrane proteins with a desired orientation into cell-sized vesicles with a targeted lipid composition of the outer and inner leaflets.     

1-Alkynyl- and 1-alkenyl-3-arylimidazo[1,5-a]pyridines: synthesis, photophysical properties, and observation of a linear correlation between the fluorescent wavelength and Hammett substituent constants

1-Alkynyl- and 1-alkenyl-3-arylimidazo[1,5-a]pyridines were synthesized. The Sonogashira coupling of 3-aryl-1-iodoimidazo[1,5-a]pyridines and various terminal alkynes with Pd(PPh(3))(2)Cl(2) (10 mol %) and CuI (10 mol %) in triethylamine at 80 °C for 12 h afforded the corresponding 1-alkenyl-3-arylimidazo[1,5-a]pyridines in good to excellent yields. The Mizoroki-Heck reaction of 3-aryl-1-iodoimidazo[1,5-a]pyridines and various styrene derivatives proceeded smoothly with Pd(OAc)(2) (5 mol %), IMes·HCl (10 mol %), and Cs(2)CO(3) (2 equiv) in DMA at 130 °C for 20 h to give the alkenylated imidazo[1,5-a]pyridines in moderate to high yields. The fluorescence maxima and fluorescence quantum yields of the alkynylated products were 458-560 nm and Φ(F) = 0.08-0.26 in chloroform solution, and those of the alkenylated imidazopyridines were 479-537 nm and Φ(F) = 0.03-0.13. The absorption behaviors of the obtained alkynylated and alkenylated imidazo[1,5-a]pyridines showed a good fit to the values predicted by TDDFT calculations at the B3LYP/6-311++G(d,p) level. In addition, the alkynylated imidazo[1,5-a]pyridines obtained showed linear correlations between the Hammett substituent constants of the substituents on the arylalkynyl group and their fluorescence wavelengths.     

Transformation of actoHMM assembly confined in cell-sized liposome

To construct a simple model of a cellular system equipped with motor proteins, cell-sized giant liposomes encapsulating various amounts of actoHMM, the complexes of actin filaments (F-actin) and heavy meromyosin (HMM, an actin-related molecular motor), with a depletion reagent to mimic the crowding effect of inside of living cell, were prepared. We adapted the methodology of the spontaneous transfer of water-in-oil (W/O) droplets through a phospholipid monolayer into the bulk aqueous phase and successfully prepared stable giant liposomes encapsulating the solution with a physiological salt concentration containing the desired concentrations of actoHMM, which had been almost impossible to obtain using currently adapted methodologies such as natural swelling and electro-formation on an electrode. We then examined the effect of ATP on the cytoskeleton components confined in those cell-sized liposomes, because ATP is known to drive the sliding motion for actoHMM. We added α-hemolysin, a bacterial membrane pore-forming toxin, to the bathing solution and obtained liposomes with the protein pores embedded on the bilayer membrane to allow the transfer of ATP inside the liposomes. We show that, by the ATP supply, the actoHMM bundles inside the liposomes exhibit specific changes in spatial distribution, caused by the active sliding between F-actin and HMM. Interestingly, all F-actins localized around the inner periphery of liposomes smaller than a critical size, whereas in the bulk solution and also in larger liposomes, the actin bundles formed aster-like structures under the same conditions.     

Synthesis of the proposed structure of phaeosphaeride A

The first total synthesis of the proposed structure of phaeosphaeride A has been achieved via six-membered-ring formation by means of an intramolecular vinyl-anion aldol reaction as the key step. This synthesis suggests a revised configurational assignment for phaeosphaeride A.     

Phase behavior of binary mixtures composed of ethylene carbonate and various organic solvents

Phase behaviors of the binary mixtures composed of ethylene carbonate (EC) and aliphatic alcohols, ω-phenyl alcohols, and alkylbenzenes were investigated. In addition, heat of solution of EC into these organic solvents was measured. The EC/methanol and EC/ethanol systems gave homogeneous solution at the temperature above their liquidus lines, while the mixtures of EC and alcohols with longer alkyl chain showed a miscibility gap in a liquid phase and provided the monotectic-type phase diagram. The liquid–liquid phase separation region expanded with the increase in the alkyl chain length. A similar phase behavior was also observed for the mixtures of EC and alkylbenzenes. On the other hand, the EC mixtures with ω-phenyl alcohols showed no miscibility gap in a liquid phase at least up to 4-phenylbutan-1-ol which has C4 alkyl chain intervening between phenyl and hydroxyl groups. This result demonstrates that both of the hydroxyl and phenyl groups act to facilitate the mixing of aliphatic compounds with EC. The phase behavior of these EC mixtures was analyzed applying the modified regular solution model in which the pair interaction energy was regarded as free energy. The model calculation with the use of heat of solution of EC at infinite dilution as the pair interaction enthalpy reproduced well both of the experimentally obtained liquidus line and mutual solubility curve as well as monotectic point.