High-spin- and low-spin-state structures of [Fe(chloroethyltetrazole)6](ClO4)2 from synchrotron powder diffraction data

The spin-crossover complex [Fe(teec)(6)](ClO(4))(2) (teec = chloroethyltetrazole) exhibits a 50 % incomplete spin crossover in the temperature range 300-30 K. Time-resolved synchrotron powder diffraction experiments have been carried out to elucidate its structural behavior. We report crystal structure models of this material at 300 K (high spin) and 90 K (low spin), as solved from synchrotron powder diffraction data by using Genetic Algorithm and Parallel Tempering techniques and refined with Rietveld refinement. During short synchrotron powder diffraction experiments (five minutes duration) two distinguishable lattices were observed the quantities of which vary with temperature. The implication of this phenomenon, that is interpreted as a structural phase transition associated with the high-to-low spin crossover, and the structural characteristics of the high-spin and low-spin models are discussed in relation to other compounds showing a similar type of spin-crossover behavior.     

MÖSsbauer Spectroscopic Study of Fecl3 Complexes of Poly(N-Methyl-2,5-Pyrrolylene), Poly(2,5-Thienylene), and Poly(3-Methyl-2,5-Thienylene) Prepared by Ni-Catalyzed Polycondensation

Reaction of FeCl₃ with poly(N-methyl-2,5-pyrrolylene) (PNMPy), poly(2,5-thienylene) (PTh), and poly(3-methyl-2,5-thienylene) (P3MeTh) caused reduction of FeCl₃ to afford Fe²⁺ species. Variable temperature Mössbauer spectra of the reaction systems indicated formation of FeCl₂ and FeCl^? ₄. The latter is regarded as a counter-anion for the cation delocalized along the π-conjugated polymer chain.     

Adsorption of microstructured particles at liquid-liquid interfaces

The solid particles are adsorbed at interfaces and form self-assembled structures when the particles have suitable wettability to both liquids. Here, we show theoretically how the microstructure on the particle surface affects their adsorption properties. The physical properties of the interface adsorbing a particle will be described by taking into account the surface roughness due to the microstructure. The microstructure on the surface changes drastically the wettability and the equilibrium position of the adsorbed particle. Therefore, the contact angle of the particle at the three-phase contact line shifts with the particle surface area, because the surface roughness enhances the interfacial properties of the particle surface. Moreover, the range of the interfacial tensions at which the particle is adsorbed becomes narrower with the increase of the surface roughness. The effect of the particle shape on the adsorption properties is also studied. In the case of disk-shaped particles, the energy changes discontinuously when the plane surface of the particle contacts the liquid-liquid interface. The adsorbing position does not change with the surface roughness. The orientation of a parallelepiped particle at the liquid-liquid interface is governed by the aspect ratio and the surface area of the particle. On the other hand, the particle which is partially covered with the microstructured surface is adsorbed firmly at the interface in an oriented state. We should consider not only the interfacial tensions but also the surface structure and the particle shape to control the adsorption behavior of the particle.     

FTIR studies of conformational energies of poly(acrylic acid) in cast films

Fourier transform infrared (FTIR) spectroscopic measurements have been undertaken to estimate the conformational energies of poly(acrylic acid) (PAA) cast films in the temperature range of 40–130°C. The temperature dependence of the IR spectra in the C=O stretching region has been analyzed to yield the side-chain and backbone conformational energies. The estimated energies are close to those previously obtained by polarized Raman spectroscopic measurements for PAA solutions. Combining the FTIR value of conformational energy with the simplified rotational isomeric state (RIS) model proposed in the Raman analysis provides a persistence length in accordance with earlier SAXS experiments. The data also agree with the Gibbs-DiMarzio predictions, further substantiating the validity of the analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 507–515, 1997     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Direct evidence of electron flow via the heme c group for the direct electron transfer reaction of fructose dehydrogenase using a silver nanoparticle-modified electrode

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified silver nanoparticles (AgNPs) was examined using cyclic voltammetry and surface-enhanced resonance Raman scattering (SERRS). Using cyclic voltammetry, catalytic oxidation currents (based on the direct electron transfer reaction of FDH) were observed from a potential of approximately −100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose, without a mediator. A comparison of the SERRS spectra and the resonance Raman spectra of FDH in solution indicated that the heme c site retained its six-coordinated low-spin heme after immobilization. Moreover, SERRS also demonstrated that the heme c of the adsorbed FDH was the electron transfer site within the enzyme.     

Surface adsorption and vesicle formation of dilauroylphosphatidylcholine in room temperature ionic liquids

In this work, we study the adhesion forces between atomic force microscopy (AFM) tips and superficial dentin etched with phosphoric acid. Initially, we quantitatively analyze the effect of acid etching on the surface heterogeneity and the surface roughness, two parameters that play a key role in the adhesion phenomenon. From a statistical study of the force-distance curves, we determine the average adhesion forces on the processed substrates. Our results show that the average adhesion forces, measured in water, increase linearly with the acid exposure time. The highest values of such forces are ascribed to the high density of collagen fibers on the etched surfaces. The individual contribution of exposed collagen fibrils to the adhesion force is highlighted. We also discuss in this paper the influence of the environmental medium (water/air) in the adhesion measurements. We show that the weak forces involved require working in the aqueous medium.     

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.