Photoemission study on the valence band of a β-FeSi2 thin film using synchrotron radiation

Resonant and constant-initial state photoemission spectroscopies using synchrotron radiation were applied to investigate the valence-band electronic structure of a semi-conducting β-type iron-disilicide (β-FeSi(2)) thin film. The results clearly indicated that the component elements, iron (Fe) and silicon (Si), contribute differently to the valence band features; the Fe 3d orbitals mainly concentrate in the top region of the valence band while the Si 3s and 3p orbitals spread over the wide region of the valence band. The β-FeSi(2) thin film showed a typical p-type semi-conducting nature with a work function of 4.78 eV. The β-FeSi(2) film showed the Fe M(1)VV Auger lines around the kinetic energy of 88 eV. It would be expected from these observations that there exist strong interactions between iron and silicon atoms in the β-FeSi(2) film resulting in orbital mixing and band formation.     

Diastereoselective hydroformylation of 2,5-cyclohexadienyl-1-carbinols with catalytic amounts of a reversibly bound directing group

A phosphinite plays a role as a reversibly bound directing group for the regio- and diastereoselective hydroformylation of 2,5-cyclohexadienyl-1-carbinols. Of the two alkene functions only one was functionalized through hydroformylation to form a synthetically attractive quaternary carbon center leaving the second alkene function for potential further functionalization.     

Synthesis of the ABC ring system of Jiadifenin via Pd-catalyzed cyclizations

An efficient route toward the central ABC system of jiadifenin has been developed using two key Pd-catalyzed cyclizations. A protic solvent-activated Mizoroki-Heck reaction was used to construct the C(9) quaternary carbon and the A ring. A cascading Tsuji-Trost cyclization/lactonization sequence was employed to establish the BC ring system and the C(5,6) stereochemistry.     

A new method for aromatic difluoromethylation: copper-catalyzed cross-coupling and decarboxylation sequence from aryl iodides

A new methodology for aromatic difluoromethylation is described. Aryl iodides reacted with α-silyldifluoroacetates upon treatment with copper catalyst in DMSO or DME to give the corresponding aryldifluoroacetates in moderate to good yields. The subsequent hydrolysis of aryldifluoroacetates and KF-promoted decarboxylation afforded a variety of difluoromethyl aromatics.     

Thermo-responsive polymer brushes as intelligent biointerfaces: preparation via ATRP and characterization

PIPAAm-brush grafted glass substrates with various graft densities and chain lengths were prepared via surface-initiated ATRP. Temperature-dependent physicochemical properties of the surfaces were characterized by means of ATR/FT-IR spectroscopy, XPS, AFM, and contact angle measurements. ATRP conditions influence the amount of grafted PIPAAm and the surface wettability and roughness of the substrate. Fibronectin adsorption and EC adhesion increased with decreasing density of PIPAAm brushes. EC adhesion was diminished with increasing PIPAAm graft length. Thus, the preparation of PIPAAm brush surface with various graft densities and chain lengths using the surface-initiated ATRP is an effective method for modulating thermo-responsive properties of surfaces.     

Use of the MALDI BioTyper system with MALDI–TOF mass spectrometry for rapid identification of microorganisms

In a clinical diagnosis microbiology laboratory, the current method of identifying bacterial isolates is based mainly on phenotypic characteristics, for example growth pattern on different media, colony morphology, Gram stain, and various biochemical reactions. These techniques collectively enable great accuracy in identifying most bacterial isolates, but are costly and time-consuming. In our clinical microbiology laboratory, we prospectively assessed the ability of matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI–TOF MS) to identify bacterial strains that were routinely isolated from clinical samples. Bacterial colonies obtained from a total of 468 strains of 92 bacterial species isolated at the Department of Clinical Laboratory at Chiba University were directly placed on target MALDI plates followed by addition of CHCA matrix solution. The plates were then subjected to MALDI–TOF MS measurement and the microorganisms were identified by pattern matching with the libraries in the BioTyper 2.0 software. Identification success at the species and genus levels was 91.7% (429/468) and 97.0% (454/468), respectively. MALDI–TOF MS is a rapid, simple, and high-throughput proteomic technique for identification of a variety of bacterial species. Because colony-to-colony differences and effects of culture duration on the results are minimal, it can be implemented in a conventional laboratory setting. Although for some pathogens, preanalytical processes should be refined, and the current database should be improved to obtain more accurate results, the MALDI–TOF MS based method performs, in general, as well as conventional methods and is a promising technology in clinical laboratories.     

Initial value/boundary value problems for fractional diffusion-wave equations and applications to some inverse problems

We consider initial value/boundary value problems for fractional diffusion-wave equation: , where 0<α?2, where L is a symmetric uniformly elliptic operator with t-independent smooth coefficients. First we establish the unique existence of the weak solution and the asymptotic behavior as the time t goes to ∞ and the proofs are based on the eigenfunction expansions. Second for α∈(0,1), we apply the eigenfunction expansions and prove (i) stability in the backward problem in time, (ii) the uniqueness in determining an initial value and (iii) the uniqueness of solution by the decay rate as t→∞, (iv) stability in an inverse source problem of determining t-dependent factor in the source by observation at one point over (0,T).     

Oriented reconstitution of a membrane protein in a giant unilamellar vesicle: experimental verification with the potassium channel KcsA

We report a method for the successful reconstitution of the KcsA potassium channel with either an outside-out or inside-out orientation in giant unilamellar vesicles, using the droplet-transfer technique. The procedure is rather simple. First, we prepared water-in-oil droplets lined with a lipid monolayer. When solubilized KcsA was encapsulated in the droplet, it accumulated at monolayers of phosphatidylglycerol (PG) and phosphoethanolamine (PE) but not at a monolayer of phosphatidylcholine (PC). The droplet was then transferred through an oil/water interface having a preformed monolayer. The interface monolayer covered the droplet so as to generate a bilayer vesicle. By creating chemically different lipid monolayers at the droplet and oil/water interface, we obtained vesicles with asymmetric lipid compositions in the outer and inner leaflets. KcsA was spontaneously inserted into vesicles from the inside or outside, and this was accelerated in vesicles that contained PE or PG. Integrated insertion into the vesicle membrane and the KcsA orientation were examined by functional assay, exploiting the pH sensitivity of the opening of the KcsA when the pH-sensitive cytoplasmic domain (CPD) faces toward acidic media. KcsA loaded from the inside of the PG-containing vesicles becomes permeable only when the intravesicular pH is acidic, and the KcsA loaded from the outside becomes permeable when the extravesicular pH is acidic. Therefore, the internal or external insertion of KcsA leads to an outside-out or inside-out configuration so as to retain its hydrophilic CPD in the added aqueous side. The CPD-truncated KcsA exhibited a random orientation, supporting the idea that the CPD determines the orientation. Further application of the droplet-transfer method is promising for the reconstitution of other types of membrane proteins with a desired orientation into cell-sized vesicles with a targeted lipid composition of the outer and inner leaflets.     

Development of double cylindrical dielectric barrier discharge ion source

This paper deals with the dielectric barrier discharge (DBD) ion source composed of the outer cylindrical dielectric tube and the inner grounded metallic tube electrode. The sample gas is supplied through the inner ceramic tube. In this ion source, the DBD plasma is localized in the DBD tube so that the sample gases can be ionized just outside of the ceramic tube by the DBD excited helium gas without being exposed in the plasma jet. Besides, ambient air does not take part in the ionization of the sample vapor because ionization takes place inside the DBD ion source. Thus, this method is totally free from contaminants in ambient air. It was found that this ion source is capable of soft, high-sensitivity, and reproducible ionization. Application of this technique to the analysis of methamphetamine, carbaryl and basil leaf was given.     

Tigloylshikonin, a new minor Shikonin derivative, from the roots and the commercial root extract of lithospermum erythrorhizon

Tigloylshikonin, a new shikonin derivative esterified with tiglic acid ((E)-2-methylbut-2-enoic acid), was isolated as a minor pigment from a food colorant "Shikon color," a commercial root extract from Lithospermum erythrorhizon SIEBOLD et ZUCCARINI. The structure of tigloylshikonin was elucidated using (1)H, (13)C, the difference nuclear Overhauser effect (NOE), and 2D NMR techniques. Its stereochemistry was determined by chiral-phase HPLC analysis. Tigloylshikonin was also found in the roots of L. erythrorhizon, which indicated that this new shikonin derivative is a typical component of naphthoquinone pigments in the roots of L. erythrorhizon.