30-mJ, diode-pumped, chirped-pulse Yb:YLF regenerative amplifier

A diode-pumped chirped-pulse regenerative amplifier with a cooled Yb:YLF crystal has been developed. The output pulse energy is 30 mJ at 20-Hz repetition rate. A high effective extraction efficiency of 68% is obtained, which is attributed to reduced saturation fluence at low temperature and to a high effective pulse energy fluence during regenerative amplification. After pulse compression by use of a parallel grating pair, 18-mJ pulse energy and 795-fs pulse duration are obtained.     

Dark-state imaging for two-dimensional mapping of a magnetic field

By imaging the dark states that are due to coherent population trapping in Na atomic vapor, we have succeeded in depicting a spatially inhomogeneous magnetic field. Highly resolved dark lines represent cross sections of the surfaces of constant magnetic fields, and they agree well with the predicted hyperfine Zeeman splitting and the two-photon selection rules of the Na atom. Mapping was made two dimensionally in real time, but extension to three dimensions is straightforward. Furthermore, unlike the previous techniques based on optical pumping, this method can be used for any magnetic-field directions.     

Krafft temperature and enthalpy of solution of<Emphasis Type="Italic"> N</Emphasis>-acyl amino acid surfactants and their racemic modifications: effect of the counter ion

The Krafft temperatures and enthalpies of solution of N-hexadecanoyl alaninate and valinate, and N-tetradecanoyl phenylalaninate were obtained from differential scanning calorimetry. The Krafft temperature of N-acyl amino acid surfactant increased with decreasing size of the counter ion, with some exceptions. The enthalpy of solution was endothermic and increased with decreasing size of the counter ion except for the cases of lithium salt. The results showed that the L-L interaction in the solid state of N-hexadecanoyl amino acid surfactant salt was superior to the D-L interaction for both the alanine and valine systems when the counter ion size increased. However, the D-L interaction was still advantageous for the phenylalanine system with Cs⁺ as a counter ion. Both Fourier transform infrared spectroscopy studies and theoretical calculations suggested that the difference in magnitudes of the interactions between peptide and counter ion was a dominant factor for the chiral effect.     

Practical optical frequency measurement system around 1.5 μm based on an acetylene-stabilized laser-locked optical frequency comb

We have developed a practical and precise frequency measurement system at 1.5 μm telecommunication band. An electro-optic-modulator based optical frequency comb is phase-locked to a dither-free acetylene-stabilized laser to realize an optical frequency comb with frequency uncertainty of 10 kHz (5 × 10⁻¹¹) and the linewidth of 15 kHz. The present frequency comb can be also used as an optical frequency reference grid defined by ITU-T (International Telecommunication Union, Telecommunication Standardization Sector). Using the present frequency measurement system, we have demonstrated the first optical frequency measurement of ¹²C¹⁶O overtone absorption lines around 1.56 μm with the uncertainty of lower than 900 kHz.     

Real-time processing using the frequency domain binaural model

There are many approaches to achieving high-performance speech enhancement. The modeling of the human auditory system is a good approach, since human beings can focus on target speech under concurrent speech conditions. One example of the binaural models is the time domain binaural model. However, this model has a high-calculation cost because the algorithm is based on auto-correlation, which is computationally intensive. Another example is the frequency domain binaural model proposed by Nakashima et al. [Nakashima H, Chisaki Y, Usagawa T, Ebata M. Frequency domain binaural model based on interaural phase and level differences. Acoust Sci Technol 2003;24(4):172-8]. Since the frequency domain binaural model uses the fast fourier transform, the calculation cost is much lower than that of the time domain binaural model. Therefore, it is not difficult to perform real-time processing using recent hardware such as digital signal processors and even laptop personal computers. However the quality of the segregated sound obtained using the frequency domain binaural model depends on system parameters such as frequency resolution and frame shift length for overlap adding in time domain. This paper introduces the construction of a prototype of a hearing assistant system based on the frequency domain binaural model. The detailed implementation techniques and parameter tuning are mentioned. The proposed system runs in real-time after parameter tuning. The directional attenuation levels, that is, the directivity patterns of the proposed system is measured. Finally, it is shown that the prototype can extract sounds coming from specific directions in real-time.     

DFT studies of ESR parameters for N?O centered radicals,N‐alkoxyaminyl and aminoxyl radicals

Theoretical calculations of ESR parameters for aminoxyl radicals have been widely studied using the density functional theory (DFT) calculations. However, the isomer N‐alkoxyaminyl radicals have been limitedly studied. With the use of experimental data for 46 N‐alkoxyaminyl and 38 aminoxyl radicals, the isotropic ¹⁴N hyperfine coupling constants (a_N) and g‐factors have been theoretically estimated by several DFT calculations. The best calculation scheme of a_N for N‐alkoxyaminyl radicals was PCM/B3LYP/6‐31 + + G(d,p) (R² = 0.9519, MAE = 0.034 mT), and that for aminoxyl radicals was PCM/BHandHLYP/6‐31 + + G(3df,3pd) (R² = 0.9336, MAE = 0.057 mT). For aminoxyl radicals, the solvation models in calculations enhanced the accuracy of reproducibility. In contrast, for N‐alkoxyaminyl radicals the calculations with solvation models provided no improvement. The differences in the best functionals between two types of radicals were thought to come from the contribution ratios of neutral and dipolar canonical structures in resonance forms. The a_N for N‐alkoxyaminyl radicals that were stabilized by small contribution of dipolar canonical structures could be precisely reproduced by B3LYP with only 20% HF exact exchange. In contrast, the a_N for aminoxyl radicals stabilized by large contribution of dipolar canonical structures was well reproduced by BHandHLYP with 50% HF exchange. The best calculation scheme of g‐factors was IEFPCM/B3LYP/6‐31 + G(d,p) (R² = 0.9767, MAE = 0.0001) for not only aminoxyl but also N‐alkoxyaminyl radicals. Copyright © 2011 John Wiley & Sons, Ltd.     

Solubilization of C60 by micellization with a thermoresponsive block copolymer in water: Characterization,singlet oxygen generation,and DNA photocleavage

Water‐soluble diblock copolymer, poly(N‐isopropylacrylamide)‐block‐poly(N‐vinyl‐2‐pyrroridone) (PNIPAM_m‐b‐PNVP_n), was found to associate with fullerene (C₆₀), and thus C₆₀ can be solubilized in water. The 63C₆₀/PNIPAM_m‐b‐PNVP_n micelle formed a core‐shell micelle‐like aggregate comprising a C₆₀/PNVP hydrophobic core and a thermoresponsive PNIPAM shell. The C₆₀‐containing polymer micelle formation and its thermoresponsive behavior were characterized using light scattering and ¹H NMR techniques. The hydrodynamic radius (R_h) of the C₆₀‐bound polymer micelle increased with increasing temperature, which was ascribed to the hydrophobic association between dehydrated PNIPAM shells above lower critical solution temperature (LCST). ¹H NMR data suggest that the motion of the PNIPAM block is restricted above LCST due to the dehydration of the PNIPAM shell in water. The generation of singlet oxygen by photosensitization by the C₆₀‐bound polymer micelle was confirmed from photooxidation of 9,10‐anthracenedipropionic acid. Furthermore, DNA was found to be cleaved by visible light irradiation in the presence of the C₆₀‐bound polymer micelle. Therefore, there may be a hope for a pharmaceutical application of the C₆₀‐bound polymer micelle to cancer photodynamic therapy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Magnetically recoverable osmium catalysts for dihydroxylation of olefins

We prepared magnetically recoverable osmium catalysts by use of magnetite, quaternary ammonium salts, and potassium osmate(VI), and applied them to the dihydroxylation of olefins. By employing 2 mol% of the magnetic osmium catalyst, the dihydroxylation reaction proceeded smoothly to provide the corresponding vicinal diol in a good chemical yield. The osmium catalyst was readily recovered by use of an external magnet, and was reused repeatedly.