Practical optical resolution of dl-muscone using tartaric acid derivatives as a chiral auxiliary

A simple and practical synthesis of (R)-(−)-muscone was achieved by optical resolution of dl-muscone using tartaric acid derivatives. The acetalization of dl-muscone with N,N′-dibenzyl-l-tartaramide in the presence of Sc(OTf)₃ and methyl orthoformate furnished a diastereomeric mixture of acetals, which were readily separated by simple recrystallization. Diastereomerically pure acetal was hydrolyzed to give optically pure muscone and recovered N,N′-dibenzyl-l-tartaramide.     

Study of Lysozyme Glycation Reaction by Mass Spectrometry and NMR Spectroscopy

The Advanced Glycation End Products (AGEs) are the causative substances of lifestyle‐habit illness. To elucidate the glycation mechanism of the protein, the reaction of lysozyme with D ‐glucose was analyzed by the fluorescence, TOF‐MS, and ¹³C‐NMR spectroscopy under the physiological condition. The fluorescence intensity of lysozyme in the glycation solution increased proportionally with a reaction time of ten weeks. The MALDI‐TOF‐MS spectra of the reaction solution after two weeks showed a peak at m/z 15066, which indicated the presence of a larger molecule than the native lysozyme (m/z 14331), and new peaks at m/z 30105 (dimer) and 45000 (trimer) were also observed. The spectral analysis supported the assumption of a continuous glycation reaction of D ‐glucose with lysozyme and a 30% transformation of lysozyme to the dimeric form during ten weeks. The ¹³C‐NMR spectra of lysozyme showed six [¹³C]‐labeled signals by the glycation reaction with [¹³C]‐glucose after two weeks of reaction. The combined analysis of TOF‐MS and ¹³C‐NMR spectra uncovered that first products of the glycation reaction of lysozyme with D ‐glucose can be observed already three hours after starting the reaction and that nine D ‐glucose units are attached during ten weeks at 37°.     

Surface modification of polydimethylsiloxane with photo-grafted poly(ethylene glycol) for micropatterned protein adsorption and cell adhesion

In this study, we applied photo-induced graft polymerization to micropatterned surface modification of polydimethylsiloxane (PDMS) with poly(ethylene glycol). Two types of monomers, polyethylene glycol monoacrylate (PEGMA) and polyethylene glycol diacrylate (PEGDA), were tested for surface modification of PDMS. Changes in the surface hydrophilicity and surface element composition were characterized by contact angle measurement and electron spectroscopy for chemical analysis. The PEGMA-grafted PDMS surfaces gradually lost their hydrophilicity within two weeks. In contrast, the PEGDA-grafted PDMS surface maintained stable hydrophilic characteristics for more than two months. Micropatterned protein adsorption and micropatterned cell adhesion were successfully demonstrated using PEGDA-micropatterned PDMS surfaces, which were prepared by photo-induced graft polymerization using photomasks. The PEGDA-grafted PDMS exhibited useful characteristics for microfluidic devices (e.g. hydrophilicity, low protein adsorption, and low cell attachment). The technique presented in this study will be useful for surface modification of various research tools and devices.     

Alpha,alpha-disubstituted glycines bearing a large hydrocarbon ring: peptide self-assembly through hydrophobic recognition

A method was developed for synthesizing alpha,alpha-disubstituted glycine residues bearing a large (more than 15-membered) hydrophobic ring. The ring-closing metathesis reactions of the dialkenylated malonate precursors proceed efficiently, particularly when long methylene chains tether both terminal olefin groups. Surprisingly, the amino groups of these alpha,alpha-disubstituted glycines are inert to conventional protective reactions (e.g., N-tert-butoxycarbonyl (Boc) protection: Boc(2)O/4-dimethylaminopyridine (DMAP)/CH(2)Cl(2); N-benzyloxycarbonyl (Z) protection: Z-Cl/DMAP/CH(2)Cl(2)). Curtius rearrangement of the carboxylic acid functionality of the malonate derivative after ring-closing metathesis leads to formation of an amine functionality and can be catalyzed by diphenylphosphoryl azide. However, only the intermediate isocyanates can be isolated, even in the presence of alcohols such as benzyl alcohol. The isocyanates obtained by Curtius rearrangement in an aprotic solvent (benzene) were isolated in high yields and treated with 9-fluorenylmethanol in a high-boiling-point solvent (toluene) under reflux to give the N-9-fluorenylmethoxycarbonyl (Fmoc)-protected aminomalonate derivatives in high yield. These hydrophobic amino acids can be incorporated into a peptide by Fmoc solid-phase peptide synthesis and the acid fluoride activation method. The stability of the monomeric alpha-helical structure of a 17-amino-acid peptide was enhanced by replacement of two alanine residues with two hydrophobic amino acid residues bearing a cyclic 18-membered ring. The results of sedimentation equilibrium studies suggested that the peptide assembles into hexamers in the presence of 100 mM NaCl.     

Synthesis of a 1α-C-methyl analogue of 25-hydroxyvitamin D3: interaction with a mutant vitamin D receptor Arg274Leu

Vitamin D₃ analogues have been developed for a mutant vitamin D receptor (VDR), Arg274Leu. The mutant VDR has a mutation at Arg274, which forms an important hydrogen bond with 1α-OH of 1α,25-dihydroxyvitamin D₃ to anchor the ligand tightly in the VDR ligand binding pocket. Stereoselective synthesis of the A-ring part of the novel vitamin D analogue, 2α-(3-hydroxypropyl)-1α-methyl-25-hydroxyvitamin D₃ (4), from d-galactose was accomplished with the key steps of the introduction of the methyl and allyl groups to the chiral building blocks. The new analogue 4 is ca. 7.3-fold more active than the natural hormone 1α,25-dihydroxyvitamin D₃ (1).     

A family of diruthenium compounds with dianionic tridentate ligands of N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)): isolation, structure determination, and electrochemistry

The ligand substitution reaction of Ru(2)(O(2)CCH(3))(4)Cl with 5-substituted N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)) resulted in a family of anionic diruthenium species of [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) that were isolated by using Na(+)- or K(+)-18-crown-6-ether as the countercation: [A(18-crown-6)(S)(x)()][Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)] (A = Na(+), K(+); S = solvent; R = H, 1; Me, 2; Cl, 3; Br, 4; NO(2), 5). All compounds were structurally characterized by X-ray crystallography. The structural features of the anionic parts are very similar among the compounds: two acetate and two R-salpy(2)(-) ligands are, respectively, located around the Ru(2) unit in a trans fashion, where the R-salpy(2)(-) ligand acts as a tridentate ligand having both bridging and chelating characters to form the M-M bridging/axial-chelating mode. Compounds 1 and 5 with K(+)-18-crown-6-ether have one-dimensional chain structures, the K(+)-18-crown-6-ether interacting with phenolate oxygens of the [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) unit to form a repeating unit, [.K.O-Ru-Ru-O.], whereas 2-4 are discrete. Cyclic voltammetry and differential pulse voltammetry revealed systematic redox activities based on the dimetal center and the substituted ligand, obeying the Hammett law with the reaction constants per substituent, rho, for the redox processes being 127 mV for Ru(2)(5+)/Ru(2)(4+), 185 mV for Ru(2)(6+)/Ru(2)(5+), 92 mV for Ru(2)(7+)/Ru(2)(6+), and 179 mV for R-salpy(-)/R-salpy(2)(-). For 3, the singly oxidized and reduced species, Ru(2)(6+) and Ru(2)(4+), respectively, generated by bulk controlled-potential electrolyses were finally monitored by spectroscopy. The singly oxidized species can also be slowly generated by air oxidation.     

Novel ET-coordinated copper(I) complexes: syntheses, structures, and physical properties (ET = BEDT-TTF = Bis(ethylenedithio)tetrathiafulvalene)

New molecular charge-transfer complexes of bis(ethylenedithio)tetrathiafulvalene (ET), (ET)Cu(2)Br(4) (1), (ET)(2)Cu(6)Br(10) (2), (ET)(2)[Cu(4)Br(6)ET] (3), (ET)(2)Cu(2)Br(4) (4), (ET)(2)Cu(3)Br(7)(H(2)O) (5), and (ET)(2)Cu(6)Br(10)(H(2)O)(2) (6), have been synthesized by diffusing reaction of ET and Cu(II)Br(2). Their crystal structures and physical properties have been investigated. X-ray analyses revealed that ET molecules coordinated to the copper ions with the sulfur atoms of the ethylenedithio groups in all compounds. The Cu-S distances are found in the range 2.268(5)-2.417(8) A, being close to the typical Cu(I)-S coordination bond distances. Strong d-pi interactions between d-electrons of the copper ions and pi-electrons of the ET molecules can be expected through the Cu-S coordination bonds. ET molecules behave as trans-bidentate ligands bonding to two different copper ions in 1 and 3, as cis-bidentate ligands in 2, 5, and 6, and as monodentate ligands in 4. In the crystal structure of 3, there are two types of ET molecules in the crystal structure, where the first type is a trans-bidentate ligand and the second forms a stacking structure by itself. Compounds 1, 2, 4, and 6 show semiconducting behavior down to low temperature (sigma(RT) = 1.6 x 10(-2) S cm(-1) and E(a) = 122 meV for 1, sigma(RT) = 2.1 S cm(-1) and E(a) = 21 meV for 2, sigma(RT) = 5.4 x 10(-4) S cm(-1) and E(a) = 239 meV for 4, and sigma(RT) = 5.1 x 10(-2) S cm(-1) and E(a) = 207 meV for 6). On the other hand, in 3, a metal-like region is observed along the b-axis and c-axis, due to the contribution of stacked ET molecules, and a metal-semiconductor transition occurs at 280 and 270 K, respectively. Also, 5 exhibits metallic conductivity in the temperature ranges 240-300 and 200-300 K along the b-axis and c-axis, respectively, despite the oxidation state of ET with 2+.     

Oxidative dehydrogenation of ethane to ethylene over NiO loaded on high surface area MgO

The oxidative dehydrogenation of ethane over NiO-loaded MgO with high surface area was carried out using a fixed-bed flow reactor at 600 °C under atmospheric pressure.

At 600 °C, the oxidative dehydrogenation of ethane (C₂H₆/O₂ = 1) without dilution with an inert gas resulted in C₂H₆ conversion of 68.8% and a high C₂H₄ selectivity of 52.8%, which corresponds to a C₂H₄ yield of 36.3%. In addition, the catalytic activity did not decrease for at least 10 h. X-ray photoelectron spectra of the catalysts after the reaction exhibited that the initial valence state of Ni²⁺ (NiO) was maintained during the oxidative dehydrogenation of ethane. However, when NiO-loaded MgO was reduced with H₂ prior to the reaction, C₂H₄ selectivity decreased to nearly zero and high CO and H₂ selectivities were observed with the C₂H₆ conversion of 50 %, indicating that partial oxidation of C₂H₆ proceeded. Therefore, it seems important to keep Ni species as an oxide phase on the support, and for this purpose, use of the high surface area of MgO is essential.