Formation of hydrotalcite in aqueous solutions and intercalation of ATP by anion exchange

The formation reaction and the intercalation of adenosine triphosphate (ATP) were studied for hydrotalcite (HT), a layered double hydroxide (LDH) of magnesium and aluminum. Hydrotalcite with nitrate ions in the interlayer (HT-NO(3)) was formed (A) by dropwise addition of a solution of magnesium and aluminum nitrates (pH ca. 3) to a sodium hydroxide solution (pH ca. 14) until the pH decreased from 14 to 10 and (B) by dropwise addition of the NaOH solution to the solution of magnesium and aluminum nitrates with pH increasing from 3 to 10. The precipitate obtained with method B was contaminated with aluminum hydroxide and the crystallinity of the product was low, possibly because aluminum hydroxide precipitates at pH 4 or 5 and remains even after HT-NO(3) forms at pH above 8. With method A, however, the precipitate was pure HT-NO(3) with increased crystallinity, since the solubility of aluminum hydroxide at pH above and around 10 is high as dissolved aluminate anions are stable in this high pH region, and there was no aluminum hydroxide contamination. The formed HT-NO(3) had a composition of [Mg(0.71)Al(0.29)(OH)(2)](NO(3))(0.29).0.58H(2)O. To intercalate ATP anions into the HT-NO(3), HT-NO(3) was dispersed in an ATP solution at pH 7. It was found that the interlayer nitrate ions were completely exchanged with ATP anions by ion exchange, and the interlayer distance expanded almost twice with a free space distance of 1.2 nm. The composition of HT-ATP was established as [Mg(0.68)Al(0.32)(OH)(2)](ATP)(0.080)0.88H(2)O. The increased distance could be explained with a calculated molecular configuration of the ATP as follows: An ATP molecule is bound to an interlayer surface with the triphosphate group, the adenosine group bends owing to its bond angles and projects into the interlayer to a height of 1 nm, and the adenosine groups aligned in the interlayer support the interlayer distance.     

Two new dioxopiperazine derivatives, arestrictins A and B, isolated from Aspergillus restrictus and Aspergillus penicilloides

In the course of searching for bioactive substances, two new dioxopiperazine derivatives, arestrictins A (1) and B (2), were isolated along with the known dioxopiperazine, cristatin A (3), and the known peptide, asperglucide (4), from the organic extract of the xerophilic fungi, Aspergillus restrictus and Aspergillus penicilloides. The absolute structures of 1 and 2, except for the configuration of the secondary alcohol in 1, were established by spectroscopic and chemical investigation. The absolute configuration of cristatin A (3) was also determined.     

Dynamical valence fluctuation at the charge-density-wave phase boundary in iodide-bridged Pt compound [Pt(chxn)2I]I2

We synthesized a novel iodo-bridged linear chain platinum compound, having the quasi-two-dimensional charge-density-wave (CDW) ground state and the smallest band gap. In this compound, we discovered an anomalous valence state in the boundary region at which the CDW phase alternates in the crystal by means of ESR, X-ray diffuse scattering, STM, and electrical resistivity. This anomalous state can be explained by the fast fluctuation between Pt(IV)-I...Pt(II) and Pt(II)...I-Pt(IV) in the double well potential. This is the first observation of the dynamical fluctuation of the CDW phase among the quasi one-dimensional halogen-bridged complexes.     

Chain conformations of poly(gamma-benzyl-L-glutamate) pre and post an electrospinning process

In order to reveal mechanisms for the electrospinning of proteins, this study focuses on the polymer chain conformation, which is considered to be a critical factor for successful electrospinning. Poly(gamma-benzyl-L-glutamate) (PBLG) is employed and the relationships between the chain conformations of the pre-spun PBLG molecules and the morphologies of the post-spun PBLG fibers are investigated. By combining viscosity measurements, and circular dichroism and FT-IR spectroscopies, chain conformations of the pre- and post-spun PBLG are characterized. The chain conformations of the pre-spun PBLG changes from an alpha-helix to a random coil upon changing the solvent ratios of dichloromethane (CH(2)Cl(2)) and trifluoroacetic acid (CF(3)COOH) from 100:0 to 0:100. In an alpha-helix conformation, the morphology of PBLG fibers is relatively thick, while that of the random coil is thin and homogenous. The mean fiber diameters decrease when the chain conformations change from an alpha-helix to a random coil. FT-IR spectroscopy and wide-angle X-ray diffraction measurements reveal that electrospinning predominantly induces an alpha-helical conformation in post-spun PBLG fibers, and more highly crystallized fibers are generated as the alpha-helical content in the pre-spun solution increases.     

Reflective thermal lens detection device

A reflective thermal lens detection device was developed for realizing a portable and sensitive detector for a microsystem. An aluminum mirror was formed on the main plate of a microchip, and a reflected probe beam was detected with a single pick-up unit. The background signal due to light absorption of the aluminum mirror was 60 times reduced when the microchannel and the mirror were separated with an interval of 600 microm. The tilt angle of the microchip significantly affected the precision of the measurement. Then a quadrant photodiode was used to detect the center of gravity of the reflected probe beam to regulate the tilt angle within +/-0.05 degrees , and this value was enough to achieve 1% CV (coefficient of variance) precision in the measurements. The limit of detection (LOD) was 60 nM for xylene cyanol solution, and the absorbance was 9.4 x 10(-6) AU. About 40 times higher sensitivity was obtained in comparison with a spectrophotometer.     

On the singularity of Quillen metrics

Let π: X → S be a holomorphic map from a compact Kähler manifold (X,g _X ) to a compact Riemann surface S. Let Σ_π be the critical locus of π and let Δ  =  π(Σ_π) be the discriminant locus. Let (ξ, h _ξ) be a holomorphic Hermitian vector bundle on X. We determine the singularity of the Quillen metric on det Rπ_*ξ near Δ with respect to g _X | _TX/S and h _ξ.     

Structures and properties of dendrimers having peripheral 2,3-difluorobiphenyl mesogenic units: effects of dendrimer generation

1st-5th generation poly(propyleneimine) dendrimers having peripheral 2,3-difluorobiphenyl mesogenic groups have been synthesized. They exhibited smectic liquid crystalline behaviour. All the liquid crystalline dendrimers exhibited a smectic A (SmA) phase and a crystal E (E) phase. The SmA-isotropic phase transition temperature increased with increasing generation. In addition, a homeotropic structure was spontaneously formed on a glass plate in the SmA phase for the 2nd, 3rd, and 4th generation dendrimers. The hometropic structure remained unchanged in the phase.     

On sharp triangle inequalities in Banach spaces

We shall present a couple of norm inequalities which will much improve the sharp triangle inequality with n elements and its reverse inequality in a Banach space shown recently by the last three authors.     

Chemical Reconstruction of Pt-Rh(100) Alloy and Pt/Rh(100), Rh/Pt(100) Bimetallic Surfaces

When Cu(110), Ni(l 10), Ag(110) surfaces are exposed to O₂ at room temperature, one dimensional metal-oxygen strings grow in the < 001 > direction of the (110) surfaces. A similar phenomenon occurs in the adsorption of H₂ on Ni( 110) surface at room temperature, where the one dimensional strings grow along the < 110 > direction. These phenomena are undoubtedly different from the adsorption induced reconstruction but are explained by the chemical reconstruction involving the formation of quasi-compounds and their self-ordering on the metal surfaces. The chemical reconstruction is indispensablly important to understand the structure and catalysis of alloy and bimetallic surfaces. Pt_0.25Rh_0.75(100) alloy surface being active for the reaction of NO with H₂ is an interesting example. When the Pt-Rh(100) alloy surface is exposed to NO or O₂ at arround 500 K, a p(3 × 1) ordered Rh-O over-layer is obtained on a Pt-enriched 2nd layer by the chemical reconstruction. Ordering of Rh-0 in the p(3 × 1) structure on the Pt(100) surface was reproduced by heating a Rh/Pt(100) bimetallic surface in O₂, and the chemical reconstruction making the p(3 × 1) Rh-O overlayer on a Pt enriched 2nd layer was also proved by heating a Pt/Rh(100) bimetallic surface in O₂ or NO. The activation mechanism of the Pt-Rh alloy and the Pt/Rh bimetallic surfaces by the chemical reconstruction was evidently shown by using a Pt deposited Rh(100), Pt/Rh(100), surface. That is, the Pt/Rh(100) is not so active for the reaction of NO with H₂, but the reconstructed p(3 × 1)Rh-O/Pt-layer/Rh(100) surface is very active for the reaction. Therefore, it was concluded that the chemical reconstruction of the Pt-Rh catalyst makes the active surface which is composed of Rh-O and a Pt layer.     

Synthesis and biological activities of 4-phenyl-5-pyridyl-1,3-thiazole derivatives as p38 MAP kinase inhibitors

A novel series of 4-phenyl-5-pyridyl-1,3-thiazole analogues possessing potent in vitro inhibitory activity against p38 mitogen-activated protein kinase and the release of tumor necrosis factor-alpha (TNF-alpha) from human monocytic THP-1 cells stimulated by lipopolysaccharide has been identified. Subsequent structure-activity relationship (SAR) studies and optimization for absorption, distribution, metabolism, and elimination (ADME) profiles led to the identification of compounds 7 g and 10b as orally active lead candidates that block the in vivo production of proinflammatory cytokine (TNF-alpha). In pharmacokinetic studies, compound 10b showed good oral administration in mice and demonstrated significant in vivo anti-inflammatory activity in an anti-collagen monoclonal antibody-induced arthritis mouse model (minimum effective dose (MED)=30 mg/kg). Further elucidation of this class of compounds may provide novel anti-inflammatory agents, such as anti-rheumatoid arthritis drugs.