Lipid-soluble and water-soluble arsenic compounds in blubber of ringed seal (Pusa hispida)

High concentrations of arsenic were observed in the blubber of ringed seals (Pusa hispida) in our previous study. To better understand the arsenic accumulation in blubber of marine mammals, arsenicals in the blubber of ringed seal were characterized using high performance liquid chromatography–inductively coupled plasma mass spectrometry (HPLC–ICPMS). The most predominant water-soluble arsenical in the blubber was dimethylarsinic acid (DMA), in spite of the predominance of arsenobetaine in other tissues. Lipid-soluble fraction was hydrolyzed under mild (tetraethylammonium hydroxide (TEAH) hydrolysis) and strong (NaOH hydrolysis) conditions, and then an aliquot of hydrolysate was injected onto HPLC–ICPMS. Both TEAH-labile and TEAH-stable/NaOH-labile lipid-soluble fractions contained precursors of DMA. These results suggest that the blubber might be the pool of DMA and DMA-containing precursors in ringed seals.     

Affinity of Hemicellulose for Cellulose Produced by Acetobacter Xylinum

Cellulose composites were produced by culturing Acetobacter aceti subsp. xylinum (ATCC 53524, agitation tolerant strain) under shaking and agitating conditions in the presence of 2% pine or beech Björkman lignin-carbohydrate complexes (LCCs) or six different types of hemicellulosic polysaccharides including glucuronoxylan, glucomannan, O-acetyl-glucuronoxylan, arabinoglucuronoxylan, arabinogalactan and xyloglucan. Hemicellulosic polysaccharide contents in cellulose composites were similar in spite of the differences in culture, shaking and agitating conditions. On the basis of hemicellulosic polysaccharide contents and X-ray diffraction patterns after extraction by dilute NaOH solution, glucomannan family polysaccharides were found to have the highest affinity to bacterial cellulose. Composites with neutral and acidic LCCs were resistant against alkali while high lability of their delignified carbohydrates against alkali indicates the importance of lignin for formation of cellulose-hemicellulose-lignin framework of plant secondary cell-walls.     

The cellulose system in viscin from mistletoe berries

The cellulose system of the viscous fibrous cellulosic polysaccharide (viscan) in the viscin tissue of the European mistletoe, Viscum album L., was analyzed by chemical and physicochemical techniques including sugar analysis, optical and transmission electron microscopy, X-ray and electron diffraction together with solid state CP/MAS ¹³C-NMR spectroscopy. The results confirmed that in the elongated thin viscin cells, the cellulose microfibrils (having a diameter of around 3 nm) were tightly coiled with their axes perpendicular to the long axis of the cell. Upon stretching these cells became deformed by more than a hundred fold. In such a deformation, the cellulose microfibrils became unwound to be perfectly aligned along the stretching direction. Based on solid-state CP/MAS ¹³C-NMR spectroscopic analysis of the viscin tissue, it was found that its cellulose consisted of I and I polymorphs in the ratio 1:1.     

Purification of Food Color Red No. 106 (acid red) using pH-zone-refining counter-current chromatography

pH-Zone-refining counter-current chromatography was successfully applied to the separation of the main components of Food Color Red No. 106 (R-106, acid red, Color Index No. 45100). A 300-mg quantity of sample was separated using the following two-phase solvent system: n-butanol-water, 40 mM sulfuric acid in organic stationary phase and 30 mM ammonia in aqueous mobile phase. The obtained fractions were analyzed by high-performance liquid chromatography and fast atom bombardment mass spectrometry. The separation yielded 261.9 mg of main component of acid red with purity of 99.9%.     

Practical enantioselective synthesis of endothelin antagonist S-1255 by dynamic resolution of 4-methoxychromene-3-carboxylic acid intermediate

A practical multikilogram-scale synthesis of enantiomerically pure S-1255 (1), a potent and orally active ET(A) receptor antagonist, is described. Utilizing readily available starting materials and reagents, the entire sequence of reactions starting from 2,5-dihydroxyacetophenone 8 proceeded under mild conditions to give 1 in an excellent chemical yield (8 steps, 41% overall yield) and in a high enantiopurity (98% ee). The crucial step of the synthesis is a dynamic resolution of key intermediate 16. (R)-Methoxy acid (R)-16 having 97-99% ee was obtained in 83-84% yield from racemic 16 as a crystalline (1S,2R)-(+)-norephedrine or (+)-cinchonine salt by the dynamic resolution comprising concurrent crystallization and in situ racemization. A mechanism of the dynamic resolution through a ring-opened zwitterionic intermediate is discussed. In the final synthetic step, an effective carbon-carbon bond formation between the C4 carbon and the p-anisyl group was accomplished by a conjugate addition-elimination reaction of Grignard reagent 3 to (R)-16 to give 1 having 98% ee. Owing to high efficiencies of functional group transformations, carbon-carbon bond formations, and the dynamic resolution, the synthesis required no chromatographic purification and was amenable to a multikilogram-scale preparation. Several kilograms of 1 for clinical trials were successfully prepared by this process.     

Unprecedented low Cu-N(azide)-Cu angles in end-on double azido bridged copper(II) complex

A rare asymmetric end-on double azido-bridged copper(II) complex has been synthesized and characterized structurally and magnetically. The Cu-N(azide)-Cu angle in this complex is calculated to be 89.1 degrees. This is unusually low in comparison to the same angle in other end-on azido-bridged binuclear complexes reported so far. Though a strong ferromagnetic interaction between the metal centers is expected in the complex, the coupling has actually been found to be antiferromagnetic, instead.     

Simultaneous enantiomeric determination of MDMA and its phase I and phase II metabolites in urine by liquid chromatography–tandem mass spectrometry with chiral derivatization

A liquid chromatography–electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) procedure was developed for the simultaneous determination of enantiomers of the prevalent designer drug 3,4-methylenedioxymethamphetamine (MDMA) and its phase I and phase II metabolites in urine with chiral derivatization. The analytes in urine were directly derivatized with chiral Marfey’s reagent, N ^α- (5-fluoro-2,4-dinitrophenyl)-d-leucinamide, without extraction. The diastereomers of the N ^α-(2,4-dinitrophenyl)-d-leucinamide derivatives generated were determined by LC-MS/MS. Satisfactory chromatographic separation was achieved for the enantiomers of MDMA and its metabolites 3,4-methylenedioxyamphetamine, 4-hydroxy-3-methoxymethamphetamine (HMMA), HMMA glucuronide, and HMMA sulfate on a semimicro octadecylsilane column using linear gradient elution. With use of multiple reaction monitoring mode, the limits of detection of these analytes ranged from 0.01 to 0.03?μg/mL. Linear calibration curves were obtained for all enantiomers from 0.1 to 20?μg/mL in urine. The method showed sufficient reproducibility and quantitative ability. This is the first report of a simple LC-MS/MS-based analytical procedure with direct chiral derivatization in aqueous media that allows simultaneous enantiomeric determination of drugs and their metabolites, including glucuronide and sulfate derivatives.     

Synthesis of poly (ethylene oxide)-b-polysilane by anionic polymerization of masked disilenes using a macroinitiator method

Poly(ethylene oxide-)-poly(1, 1-dimethyl-2, 2-dihexyldisilene) block copolymers (PEO-b-PMHS) were synthesized by the anionic polymerization of masked disilenes initiated with the potassium alkoxide of poly(ethylene glycol). The block copolymer self-assembled into polymer micelles in water accompanied by a transition in the polysilane conformation.     

Proton Order–Disorder Phenomena in a Hydrogen‐Bonded Rhodium–η5‐Semiquinone Complex: A Possible Dielectric Response Mechanism

A newly synthesized one‐dimensional (1D) hydrogen‐bonded (H‐bonded) rhodium(II)–η⁵‐semiquinone complex, [Cp*Rh(η⁵‐p‐HSQ‐Me₄)]PF₆ ([ 1 ]PF₆; Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl; HSQ=semiquinone) exhibits a paraelectric–antiferroelectric second‐order phase transition at 237.1 K. Neutron and X‐ray crystal structure analyses reveal that the H‐bonded proton is disordered over two sites in the room‐temperature (RT) phase. The phase transition would arise from this proton disorder together with rotation or libration of the Cp* ring and PF₆^? ion. The relative permittivity ε_b′ along the H‐bonded chains reaches relatively high values (ca., 130) in the RT phase. The temperature dependence of ¹³C CP/MAS NMR spectra demonstrates that the proton is dynamically disordered in the RT phase and that the proton exchange has already occurred in the low‐temperature (LT) phase. Rate constants for the proton exchange are estimated to be 10^?4–10^?6 s in the temperature range of 240–270 K. DFT calculations predict that the protonation/deprotonation of [ 1 ]⁺ leads to interesting hapticity changes of the semiquinone ligand accompanied by reduction/oxidation by the π‐bonded rhodium fragment, producing the stable η⁶‐hydroquinone complex, [Cp*Rh³⁺(η⁶‐p‐H₂Q‐Me₄)]²⁺ ([ 2 ]²⁺), and η⁴‐benzoquinone complex, [Cp*Rh⁺(η⁴‐p‐BQ‐Me₄)] ([ 3 ]), respectively. Possible mechanisms leading to the dielectric response are discussed on the basis of the migration of the protonic solitons comprising of [ 2 ]²⁺ and [ 3 ], which would be generated in the H‐bonded chain.     

Efficient Light-Harvesting Antennae Resulting from the Dense Organization of Dyes into DNA Junctions through d-Threoninol

Herein we report the construction of efficient light-harvesting antennae by hybridization of DNA oligonucleotides containing high densities of fluorophores into DNA junctions through d -threoninol. Six pyrene donors could be incorporated into each arm without self-quenching. A perylene acceptor was located at the center of the junction. Antenna effects of a duplex and three- to eight-way junctions were systematically compared. Six- and eight-way junctions had the highest antenna effects, and their effective absorption coefficients were 8.5 times higher than that of perylene. Interestingly, even-numbered junctions had higher efficiencies than odd-numbered junctions. Nondenaturing gel analyses and fluorescence lifetime measurements demonstrated that the strong odd–even effects were derived from differences in the stability of junctions. The results presented will guide the design of efficient artificial photosynthetic systems.