Explosion hazards of ion exchange resin mixed with perchloric acid

On January 21, 2003, an explosion occurred while ion exchange resin (IER) was being used to separate impurities from uranium solution. To clarify the cause of the accident and go/no-go criteria of the explosion, elemental analysis of the IER, DSC analysis, and SIKAREX analysis (a screening tool for runaway reactions) were performed. Finally, experiments on the same scale as the accident were conducted in an explosion chamber. When HClO₄ was added to IER-NO₃, the IER violently exploded without any heating nor metal ions such as uranium. It was confirmed that the accident was caused by an incorrect procedure in the chemical process. From the standpoint of explosion safety, IER-NO₃ in particular should be kept away from perchloric acid in the laboratory.     

Synthesis and characterization of proton‐conducting copolyimides bearing pendant sulfonic acid groups

A series of sulfonated copolyimides (co‐SPIs) bearing pendant sulfonic acid groups were synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), bis(3‐sulfopropoxy) benzidines (BSPBs), and common nonsulfonated diamines via statistical or sequenced polycondensation reactions. Membranes were prepared by casting their m‐cresol solutions. The co‐SPI membrane had a microphase‐separated structure composed of hydrophilic and hydrophobic domains, but the connecting behavior of hydrophilic domains was different from that of the homo‐SPIs. The co‐SPI membranes displayed clear anisotropic membrane swelling in water with negligibly small dimensional changes in the plane direction of the membrane. With water uptake values of 39–94 wt %, they showed dimensional changes in membrane thickness of about 0.11–0.58, which were much lower than those of homo‐SPIs. The proton conductivity σ values of co‐SPI membranes with ion exchange capacity values ranging from 1.95–2.32 meq/g increased sigmoidally with increasing relative humidity. They displayed σ values of 0.05–0.16 S/cm at 50 °C in liquid water. Increasing temperature up to 120 °C resulted in further increase in proton conductivity. The co‐SPI membranes showed relatively good conductivity stability during the aging treatment in water at 100 °C for 300 h. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1545–1553, 2005     

Microfluidics: Applications for analytical purposes in chemistry and biochemistry

In this review, we present recent advancements and novel developments in fluidic systems for applied analytical purposes in chemistry, biochemistry, and life science in general that employ and reflect the full benefits of microfluidics. A staggering rise in publications related to integrated, all‐in‐one microfluidic chips capable of separation, reaction, and detection have been observed, all of which realise the principal of micro total analysis systems or lab‐on‐a‐chip. These integrated chips actively adopt the scaling law concepts, utilising the highly developed fabrication techniques. Their aim is to multi‐functionalise and fully automate devices believed to assist the future advancements of point‐of‐care, clinical, and medical diagnostics.     

Preparation and applications of novel fluoroalkyl end‐capped vinyltrimethoxysilane oligomer/hydroxyapatite nanocomposites

Novel fluoroalkyl end‐capped vinyltrimethoxysilane oligomer/hydroxyapatite (HAp) nanocomposites were prepared by the reaction of calcium nitrate tetrahydrate and phosphoric acid in the presence of the corresponding oligomer. These fluorinated oligomer/HAp composites thus obtained are nanometer size‐controlled fine particles (83–173 nm), and were found to exhibit good dispersibility in methanol, ethanol, and isopropyl alcohol. These fluorinated HAp nanocomposites were applied to the surface modification of glass and poly(methyl methacrylate) (PMMA) to exhibit good hydro‐ and oleophobic characteristics imparted by fluorine on their surface. In addition, the surface structural changes of the modified polyethylene terephtalate and PMMA films treated with these fluorinated nanocomposites before and after soaking in a simulated body fluid (SBF) were analyzed by using SEM, XRD, and EDX to observe the formation of spherical HAp deposits on the surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Orientational relationship among main and side chains of a polyimide alignment layer, liquid crystals monolayer and bulk pretilt angle

We have determined the orientational distribution of cyano-substituted side chains of a rubbed polyimide film, and a liquid crystal monolayer adsorbed on the film, by means of optical second harmonic generation. With the orientational distribution of a main chain that was measured in a previous study by means of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, we have obtained the correlation of all the orientational distributions contributing to the alignment of LC molecules, i.e. pretilt angle. We find that the side chain plays a role in increasing the pretilt angle, but in the case of rubbing strength dependence, the main chain has stronger correlation with the pretilt angle than has the side chain.