Evaluation of zinc self-diffusion at the interface between homoepitaxial ZnO thin films and (0001) ZnO substrates

Isotopic ZnO thin films were deposited on the c-plane of ZnO single crystals by pulsed laser deposition. The isotopic abundance of Zn in the films was determined with a secondary ion mass spectrometry before and after the films was diffusion annealed. The diffusion profiles across the film/substrate interface behaved smooth features. The zinc diffusion coefficient (D_Zn) was obtained by analyzing the slope of the profile in the annealed sample. The temperature dependence of D_Zn was determined to be D_Zn(cm²/s)=8.0×10⁴exp(?417[kJ/mol])/RT, where R and T are gas constant and temperature. The zinc ion diffusion coefficients were of the same order as that in a ZnO single crystal. A comparison of the experimental and theoretical values indicated that the zinc ions diffused in the thin film and the single crystal through a vacancy mechanism.     

Experimental demonstration of the induction synchrotron

We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.     

Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Volume polarization holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymer

Volume polarization holographic recording in phenanthrenequinone-doped poly (methyl methacrylate) photopolymer is obtained. Photoinduced birefringence in a 2 mm thick sample is measured by a phase-modulated ellipsometry. The birefringence induced in this material by linearly polarized beam at 514 nm reaches 1.2×10(-5). In addition, ability for recording volume polarization grating using two different polarization configurations is demonstrated and compared. The experimental results show that the diffraction efficiency of the hologram reaches to ～40% by using two orthogonal circularly polarized beams.     

Ascent of open-circuit voltage on diamond-like carbon photovoltaic cell by infrared heating-assisted pulsed-laser deposition

Phosphorus-doped diamond-like carbon (DLC) films were deposited on quartz and p-type silicon (p-Si) substrates by pulsed-laser deposition. Open-circuit voltage (V _oc) and short-circuit density (I _sc/cm²) from a heating process converted from one type of electrode to another and the two types of electrode pattern are shown by the V–I characteristics. The first heating process was by a ceramic heater, and the other was by an infrared heater. We adopted two electrode patterns, from a bipectinate electrode and a plot pattern electrode, to measure electric photovoltaic characteristics. We were able to upgrade V _oc and I _sc/cm² to 35∼45 mV, and 0.24 μA/cm², respectively, under infrared heating. V _oc by the plot pattern electrode was over 2 V under infrared heating and ceramic heating did not match this on deposition by the PLD method.     

Local crystal structure of nano-manganese-oxide gold adsorbent

The local crystal structure of dried and deuterated nano-manganese-oxide powder samples was studied via atomic pair distribution function analysis of X-ray and neutron powder diffraction data. The protonated sample shows ultrahigh efficiency as a gold adsorbent even from ppt-level aqueous solutions such as seawater. We show that the nano-manganese-oxide particles have an R-MnO₂-type local crystal structure. The possible role of the protons on the surface of the nano-particles is discussed.     

Reinvestigation of the thermoelectric properties of Ag8GeTe6

High‐density polycrystalline samples (above 98% of the theoretical density) of Ag₈GeTe₆ were prepared by solid‐state reactions of Ag₂Te, GeTe, and Te, followed by hot‐pressing. The thermoelectric properties were measured at temperatures ranging from room temperature to around 700 K. The thermal conductivity values were extremely low (0.25 Wm^–1 K^–1 at room temperature), and consequently Ag₈GeTe₆ exhibited a relatively high thermoelectric figure of merit, ZT = 0.48 at 703 K. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spin texture and magnetoroton excitations at nu=1/3

Neutral spin texture (ST) excitations at nu=1/3 are directly observed for the first time by resonant inelastic light scattering. They are determined to involve two simultaneous spin flips. At low magnetic fields, the ST energy is below that of the magnetoroton minimum. With increasing in-plane magnetic field these mode energies cross at a critical ratio of the Zeeman and Coulomb energies of eta(c)=0.020+/-0.001. Surprisingly, the intensity of the ST mode grows with temperature in the range in which the magnetoroton modes collapse. The temperature dependence is interpreted in terms of a competition between coexisting phases supporting different excitations. We consider the role of the ST excitations in activated transport at nu=1/3.