Influence of pressure and temperature on the physico-chemical properties of mobile phase mixtures commonly used in high-performance liquid chromatography

To fulfil the increasing demand for faster and more complex separations, modern HPLC separations are performed at ever higher pressures and temperatures. Under these operating conditions, it is no longer possible to safely assume the mobile phase fluid properties to be invariable of the governing pressures and temperatures, without this resulting in significantly deficient results. A detailed insight in the influence of pressure and temperature on the physico-chemical properties of the most commonly used liquid mobile phases: water-methanol and water-acetonitrile mixtures, therefore becomes very timely. Viscosity, isothermal compressibility and density were measured for pressures up to 1000 bar and temperatures up to 100 degrees C for the entire range of water-methanol and water-acetonitrile mixtures. The paper reports on two different viscosity values: apparent and real viscosities. The apparent viscosities represent the apparent flow resistance under high pressure referred to by the flow rates measured at atmospheric pressure. They are of great practical use, because the flow rates at atmospheric pressure are commonly stable and more easily measurable in a chromatographic setup. The real viscosities are those complying with the physical definition of viscosity and they are important from a fundamental point of view. By measuring the isothermal compressibility, the actual volumetric flow rates at elevated pressures and temperatures can be calculated. The viscosities corresponding to these flow rates are the real viscosities of the solvent under the given elevated pressure and temperature. The measurements agree very well with existing literature data, which mainly focus on pure water, methanol and acetonitrile and are only available for a limited range of temperatures and pressures. As a consequence, the physico-chemical properties reported on in this paper provide a significant extension to the range of data available, hereby providing useful data to practical as well as theoretical chromatographers investigating the limits of modern day HPLC.     

AlCl3-catalyzed tandem acetylation of hydroarylated [60]fullerenes

The AlCl3-catalyzed acetylation of 1,2-hydrophenylated [60]fullerenes, HC60-Ar, proceeded via a sequential manner involving the acetylation at the hydrogenated fullerene carbon, the following intramolecular cyclization with the adjacent aryl group, the facile loss of water, and the second acetylation of the generated indenylidene double bond. However, the similar reaction of the hydrobiphenylated analogue brought about the normal acetylation at the terminal aromatic ring prior to the same sequential reactions as did hydrophenylated fullerenes.     

Synthesis and characterization of thiochromone S,S-dioxides as new photolabile protecting groups

3-Arylthiochromone derivatives were synthesized as new photolabile protecting groups, in which the photoreactivity was switchable based on oxidation of the sulfur atom (sulfide and sulfone); the protected substrates , released the corresponding alcohols, amines or carbonxylic acids almost quantitatively under UV-light in neutral condition and the photoproduct showed high fluorescence intensity.     

Enantioselective Synthesis of Tetra-ortho-Substituted Axially Chiral Biaryls through Rhodium-Catalyzed Double [2 + 2 + 2] Cycloaddition

[reaction: see text] We have established an enantioselective synthesis of both C2 symmetric and unsymmetric tetra-ortho-substituted axially chiral biaryls through rhodium-catalyzed double [2 + 2 + 2] cycloaddition (up to >99% ee). This method serves as an attractive new route to enantioenriched tetra-ortho-substituted axially chiral biaryls in view of the one-step access to substrate diynes and tetraynes starting from readily available alkynes.     

Fully automated liquid chromatography-mass spectrometry determination of 17beta-estradiol in river water

Surface modified molecularly imprinted polymers (SM-MIPs) for 17beta-estradiol (E2), utilizing 6-ketoecradiol as a pseudo template were prepared. MIPs for E2 were synthesized using 4-vinyl pyridine and ethylene dimethacrylate as a functional monomer and cross-linking agent, respectively. MIPs selectively retained E2 and provided excellent chromatographic resolution from interfering compounds inherent in river water sample matrices. Therefore, freshly prepared MIPs were applied to quantitative mass spectrometric (negative electrospray ionization mode) detection of low levels of E2 in river water sample. In order to pre-concentrate the target compound for HPLC analysis, column switching was coupled with a pretreatment column packed with the MIPs. The repeatability of actual determinations of river water sample, in which background E2 was not detected, spiked with 50 ng/L of E2 was 2.2% RSD with a detection limit and qualification limit of 1.8 and 5.4 ng/L, respectively. Surface modification of MIP particlefs packed in the pretreatment column provided selective affinity and on-line concentration of low levels of E2 while simultaneously eliminating sample matrix interference, resulting in a significant increase in sensitivity and reproducibility for liquid chromatography-mass spectrometry analysis of E2 in river water sample.     

Infrared photodissociation spectroscopy of Al(+)(CH(3)OH)(n) (n = 1-4)

Infrared photodissociation spectra of Al(+)(CH(3)OH)(n) (n = 1-4) and Al(+)(CH(3)OH)(n)-Ar (n = 1-3) were measured in the OH stretching region, 3000-3800 cm(-1). For n = 1 and 2, sharp absorption bands were observed in the free OH stretching region, all of which were well reproduced by the spectra calculated for the solvated-type geometry with no hydrogen bond. For n = 3 and 4, there were broad vibrational bands in the energy region of hydrogen-bonded OH stretching vibrations, 3000-3500 cm(-1). Energies of possible isomers for the Al(+)(CH(3)OH)(3),4 ions with hydrogen bonds were calculated in order to assign these bands. It was found that the third and fourth methanol molecules form hydrogen bonds with methanol molecules in the first solvation shell, rather than a direct bonding with the Al(+) ion. For the Al(+)(CH(3)OH)(n) clusters with n = 1-4, we obtained no evidence of the insertion reaction, which occurs in Al(+)(H(2)O)(n). One possible explanation of the difference between these two systems is that the potential energy barriers between the solvated and inserted isomers in the Al(+)(CH(3)OH)(n) system is too high to form the inserted-type isomers.     

Anti-babesial compounds from Curcuma xanthorrhiza

Anti-babesial ingredients, (12R)- and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols, were isolated from Curcuma xanthorrhiza. The structures were established by the extensive NMR techniques. The assignments of (1)H NMR data of (12R)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was revised, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizol was isolated as a pure form for the first time. The IC(50) of the active compounds were compared with that of commercial drug, diminazene aceturate (Ganaseg). IC(50) values of Ganaseg, (12R)-, and (12S)-12,13-dihydro-12,13-dihydroxyxanthorrhizols were 0.6 microg mL(-1), 8.3 microg mL(-1) and 11.6 microg mL(-1), respectively.     

Polymersomes Prepared from Thermoresponsive Fluorescent Protein–Polymer Bioconjugates: Capture of and Report on Drug and Protein Payloads

Polymersomes provide a good platform for targeted drug delivery and the creation of complex (bio)catalytically active systems for research in synthetic biology. To realize these applications requires both spatial control over the encapsulation components in these polymersomes and a means to report where the components are in the polymersomes. To address these twin challenges, we synthesized the protein–polymer bioconjugate PNIPAM‐b‐amilFP497 composed of thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) and a green‐fluorescent protein variant (amilFP497). Above 37 °C, this bioconjugate forms polymersomes that can (co‐)encapsulate the fluorescent drug doxorubicin and the fluorescent light‐harvesting protein phycoerythrin 545 (PE545). Using fluorescence lifetime imaging microscopy and Förster resonance energy transfer (FLIM‐FRET), we can distinguish the co‐encapsulated PE545 protein inside the polymersome membrane while doxorubicin is found both in the polymersome core and membrane.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).