The investigation of an equilibrium dependent reaction for the formation of enamines in a microchemical system

The paper describes the equilibrium dependant reaction for the formation of enamines in a microchemical system utilising electroosmotic flow (EOF) for fluid mobilisation. The authors have shown that the reaction can be carried out without the presence of a Lewis acid catalyst, in addition the enamine intermediate was synthesised at room temperature using mild solvent conditions. A 42% conversion of cyclohexanone into the enamine has been achieved to date.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Quantification and evaluation of Joule heating in on-chip capillary electrophoresis

We present the use of a novel, picoliter volume interferometer to measure, for the first time, the extent of Joule heating in chip-scale capillary electrophoresis (CE). The simple optical configuration for the on-chip interferometric backscatter detector (OCIBD) consists of an unfocused laser, an unaltered silica chip with a half-cylinder channel and a photodetector. Using OCIBD for millidegree-level noninvasive thermometry, temperature changes associated with Joule heating (2.81 degrees C above ambient) in on-chip CE have been observed in 90 microm wide and 40 microm deep separation channels. The temporal response of Joule heating in isotropically etched channels was exponential, with it taking an excess of 2.7 s to reach equilibrium. Buffer viscosity changes have also been derived from empirical on-chip thermometry data, allowing for the determination of diffusion coefficients for solutes when separated in heated buffers. In addition, OCIBD has allowed the reduction in separation efficiency to be estimated in the absence of laminar flow and due to increased molecular diffusion and lower buffer viscosity. A 7% reduction in separation efficiency was determined for a high current drawing buffer such as Tris-boric acid under an applied field of just 400 V/cm. Results indicate that heating effects in on-chip CE have been underestimated and there is a need to readdress the theoretical model.     

Chip-based nLC-TOF-MS is a highly stable technology for large-scale high-throughput analyses

Many studies focused on the discovery of novel biomarkers for the diagnosis and treatment of disease states are facilitated by mass spectrometry-based technology. HPLC coupled to mass spectrometry is widely used; miniaturization of this technique using nano-liquid chromatography (LC)-mass spectrometry (MS) usually results in better sensitivity, but is associated with limited repeatability. The recent introduction of chip-based technology has significantly improved the stability of nano-LC-MS, but no substantial studies to verify this have been performed. To evaluate the temporal repeatability of chip-based nano-LC-MS analyses, N-glycans released from a serum sample were repeatedly analyzed using nLC-PGC-chip-TOF-MS on three non-consecutive days. With an average inter-day coefficient of variation of 4 %, determined on log₁₀-transformed integrals, the repeatability of the system is very high. Overall, chip-based nano-LC-MS appears to be a highly stable technology, which is suitable for the profiling of large numbers of clinical samples for biomarker discovery.     

Synthesis of [ethylene-1-(eta(5)-4,5,6,7-tetrahydro-1-indenyl)-2- (eta(5)-4',5',6',7'-tetrahydro-2'-indenyl)]titanium dichloride, the elusive isomer of the Brintzinger-type ansa-titanocenes

We present a short synthesis of 1-(2-indenyl)-2-(3-indenyl)ethane (5) and a method for its conversion to the ansa-metallocene [ethylene(eta5-inden-1-yl)(eta5-inden-2-yl)]titanium dichloride (13). The synthetic strategy applied to prepare bisindene 5 relies on the efficient alkylation of 2-(phenylsulfonyl)indane followed by HMPA-assisted E1cB-elimination of phenylsulfinate. This tandem sequence circumvents the predisposition of indene to undergo C(1)-alkylation and enables access to C(2)-substituted indenes. The key step in the synthesis of the title ansa-titanocene (4) features a previously unreported equilibration step to generate the bis(indenide anion) of 5. Complexation with TiCl4.(THF)2 followed by hydrogenation of the product metallocene furnishes ansa-titanocene 4.     

Analysis of Overlapped and Noisy Hydrogen/Deuterium Exchange Mass Spectra

Noisy and overlapped mass spectrometry data hinder the sequence coverage that can be obtained from hydrogen deuterium exchange analysis, and places a limit on the complexity of the samples that can be studied by this technique. Advances in instrumentation have addressed these limits, but as the complexity of the biological samples under investigation increases, these problems are re-encountered. Here we describe the use of binomial distribution fitting with asymmetric linear squares regression for calculating the accurate deuterium content for mass envelopes of low signal or that contain significant overlap. The approach is demonstrated with a test data set of HIV Env gp140 wherein inclusion of the new analysis regime resulted in obtaining exchange data for 42 additional peptides, improving the sequence coverage by 11 %. At the same time, the precision of deuterium uptake measurements was improved for nearly every peptide examined. The improved processing algorithms also provide an efficient method for deconvolution of bimodal mass envelopes and EX1 kinetic signatures. All these functions and visualization tools have been implemented in the new version of the freely available software, HX-Express v2.

Microwave assisted Suzuki reaction in N-butylpyridinium salts/water systems

A solvent mixture containing the ionic liquid derived from 4-picoline (C₄MPyBF₄) and water was tested for the Suzuki-Miyaura reaction under microwave irradiation. This solvent system led to very high conversions and clean reactions. When compared with the other more common ionic liquid, such as C₄MImBF₄, C₄MPyBF₄ proved to be superior.     

Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.