Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

Fe–Hg Interactions and P Chemical Shifts in [Fe(CO)3 (PPh2R)2(HgCl2)] (R=pym, fur, py, thi)

In order to study the effects of R group on Fe–Hg interactions and 31P chemical shifts, the structures of mononuclear complexes Fe(CO)₃(PPh₂R)₂ (R=pym:1, fur: 2, py: 3,thi: 4; pym=pyrimidine, fur=furyl, py=pyridine, thi=thiazole) and binuclear complexes [Fe(CO)₃(PPh₂R)₂(HgCl₂)] (R=pym: 5, fur: 6, py: 7, thi: 8) were studied using the density functional theory (DFT) PBE0 method. The 31P chemical shifts were calculated by PBE0-GIAO method. Nature bond orbital (NBO) analyses were also performed to explain the nature of the Fe–Hg interactions. The conclusions can be drawn as follows: (1) The complexes with nitrogen donor atoms are more stable than those with O or S atoms. The more N atoms there are, the higher is the stabilility of the complex. (2) The Fe–Hg interactions play a dominant role in the stabilities of the complexes. In 5 or 6, thereisa σ-bond between Fe and Hg atoms. However, in 7 and 8, the Fe–Hg interactions act as σ_P–Fe→n_Hg and σ_C–Fe→n_Hg delocalization. (3) Through Fe→Hg interactions, there is charge transfer from R groups towards the P, Fe, and Hg atoms, which increases the electron density on P nucleus in binuclear complexes. As a result, compared with their mononuclear complexes, the 31P chemical shifts in binuclear complexes show some reduction.     

Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels

A new kind of pH-/temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium carboxymethylcellulose (CMC) and poly(N-isopropylacrylamide) (PNIPA) cross-linked by inorganic clay (CMC/PNIPA/Clay hydrogel) was prepared. The temperature- and pH-responsive behaviors, the mechanical properties of these hydrogels were investigated. The CMC/PNIPA/Clay hydrogels exhibited a volume phase transition temperature around 32 °C with no significant deviation from the conventional PNIPA hydrogels. The swelling ratio of the CMC/PNIPA/Clay hydrogels gradually decreased with increasing the contents of clay. The influence of pH value on swelling behaviors showed that there is a maximum swelling ratio at pH 5.9. Moreover, the CMC/PNIPA/Clay hydrogels exhibited excellent mechanical properties with high tensile stress and elongation at break in excess of 1200%.     

Helical structures architecture of l-{2-(4-hydroxy-phenyl)-1-[(pyren-1-ylmethyl)-carbamoxyl]-ethyl}-carbamic acid tert-butyl ester

A new pyrenemethylamine substituted l-Boc-tyrosine derivative was synthesized and characterized. UV-vis, FL, CD, and light scattering experiments proved that the chiral molecules were able to self-assemble for formation of new aggregate structure. The SEM and AFM images indicated that the helical wires could be fabricated by π-π stacking interaction between adjacent pyrene molecules.     

Four Novel Eremophilanolides from Ligularia sagitta

Four new eremophilanolides, isolated from Ligularia sagitta, were identified as (1β,3β,6β,8β,10β)‐6‐acetoxy‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 1 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐6,8‐dihydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 2 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐ethoxy‐6‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 3 ), and (1β,3β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 4 ). Their structures were elucidated by spectroscopic methods, including 2D‐NMR techniques and chemical transformations.     

Xylan hydrolysis in zinc chloride solution

Xylan is the major component of hemicellulose, which consists of up to one-third of the lignocellulosic biomass. When the zinc chloride solution was used as a pretreatment agent to facilitate cellulose hydrolysis, hemicellulose was hydrolyzed during the pretreatment stage. In this study, xylan was used as a model to study the hydrolysis of hemicellulose in zinc chloride solution. The degradation of xylose that is released from xylan was reduced by the formation of zinc-xylose complex. The xylose yield was >90% (w/w) at 70°C. The yield and rate of hydrolysis were a function of temperature and the concentration of zinc chloride. The ratio of zinc chloride can be decreased from 9 to 1.3 (w/w). At this ratio, 76% of xylose yield was obtained. When wheat straw was pretreated with a concentrated zinc chloride solution, the hemicellulose hydrolysate contained only xylose and trace amounts of arabinose and oligosaccharides. With this approach, the hemicellulose hydrolysate can be separated from cellulose residue, which would be hydrolyzed subsequently to glucose by acid or enzymes to produce glucose. This production scheme provided a method to produce glucose and xylose in different streams, which can be fermented in separated fermenters.     

Quantitative determination of glutathione in single human erythrocytes by capillary zone electrophoresis with electrochemical detection

Glutathione (GSH) in single human erythrocytes is determined by capillary zone electrophoresis with end-column amperometric detection at a gold/mercury amalgam microelectrode. A capillary of 10 microm inner diameter is suitable for determination of GSH in an individual erythrocyte with a good signal-to-noise ratio. The limit of detection is 1 x 10(-7) mol/L or 26 amol and the linear dynamic range is 2 x 10(-7) to 2 X 10(-5) mol/L for the capillary. In this method, the calibration line is obtained with a capillary adsorbed before a certain amount of hemoglobin can be used for the quantification of GSH in the external standardization. The whole cell injection and the lack of necessity of a derivatization reaction lead to more accurate and precise results, which are closer to the macroscopic values of glutathione in human red blood cell (i.e., hemolysate) than those determined by indirect laser-induced fluorescence detection.     

Ion/molecule reactions in a miniature RIT mass spectrometer

Ion/molecule reactions were explored in a newly developed miniature mass spectrometer fitted with a rectilinear ion trap (RIT) mass analyzer. The tandem mass spectrometry performance of this instrument is demonstrated using collision induced dissociation (CID) and ion/molecule reactions. The latter includes Eberlin transacetalization reactions and electrophilic additions. Selective detection of the chemical warfare simulant dimethyl methyl phosphonate (DMMP) was achieved through selective Eberlin reactions of its characteristic phosphonium fragment ion CH3OP(+)(O)CH3 (m/z 93), with 1,4-dioxane or 1,3-dioxolane. Efficient adduct formation as a result of electrophilic attack by the phosphonium ion on various nucleophilic reagents, including 1,1,3,3-tetramethyl urea, methanesulfonic acid methyl ester, dimethyl sulfoxide and methyl salicylate, was also observed using the RIT device. The product ions of these reactions were analyzed using CID and the characteristic fragmentation patterns of the ionic addition products were recorded using multiple-stage experiments in the miniature RIT instrument. This study clearly demonstrates that a small, home-built, miniature RIT mass spectrometer can be used to perform analytically useful ion/molecule reactions and also that instruments like this have the potential to provide a portable platform for in situ detection of organophosphorus esters and related compounds with high specificity using tandem mass spectrometry.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

Mesoporous amorphous MnO<Subscript>2</Subscript> as electrode material for supercapacitor

A kind of novel mesoporous, electrochemical active material, amorphous MnO₂ has been synthesized by an improved reduction reaction and using supramolecular as template. The synthesized sample was characterized physically by thermogravimetric analysis, X-ray diffraction, transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) surface area measurement, respectively. Electrochemical characterization was performed using cyclic voltammetry and chronopotentiometry in 2 mol/l KOH aqueous solution electrolyte. The results of BET and TEM analysis indicated that supramolecular template plays an important role in the process of big specific surface area mesoporous material forming. After sintering at 200 °C, the sample still remained an amorphous structure, and its specific capacitance reached 298.7 F/g and presented a very stable capacitance after 500 cycles. In addition, the electrochemical process, such as ion transfer and electrical condition, was also investigated with electrochemical impedance spectroscopy.