Steady-state electrolysis at a grooved or ridged plane

This study concerns an infinite plane whose smoothness is marred by a single defect: either a groove or a ridge. The blemished plane serves as an electrode supporting a diffusion-controlled steady-state process. By using a convenient coordinate transformation, the local current density at all points on the surface is determined exactly. The results are found to confirm intuitive expectations. Thus, compared with normal values on the plane remote from a groove, the electron transfer rate is diminished within the groove but enhanced along its margins. Similarly, an abnormally large transfer rate is encountered high on the ridge but the rate is subnormal on its lower flanks. The total current is demonstrated to be unchanged by the presence of the blemish. Received: 27 September 1996 / Accepted: 11 March 1997     

Effect of ion pairing on steady-state voltammetric limiting currents at microelectrodes Part I. Theoretical principles

Voltammetric studies in solutions of high resistivity are facilitated by the use of microelectrodes under steady-state conditions. Such solutions are encountered with solvents of low permittivity because of the very sparing solubility of electrolytes. Moreover, in such media the supporting electrolyte, as well as the electroactive ionic species, is usually extensively ion paired. Here we predict the limiting current that will flow in these circumstances, when a monovalent ion undergoes a one-electron transfer at a hemispherical microelectrode to form a neutral product. The ion pairing equilibria are assumed to be fast but all diffusion coefficients are treated as distinct. An analytical solution is elusive in the general case, but a simple numerical procedure allows the limiting current to be predicted for any combination of the system parameters. Several special cases are also discussed, some of which yield explicit formulae for the limiting current. In a companion paper, experimental data are compared with the theoretical predictions.     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

An improved enzymatic assay for glucose determination in blood serum using a l,1′-dimethylferricinium dye

l,l′-dimethylferricinium (DMFe⁺),a stable and pH-insensitive blue dye, was prepared via enzymatic oxidation of a 1,1′-dimethylferrocene (DMFe):2-hydroxypropyl-β-cyclodextrin (HPCD) watersoluble inclusion complex, using bilirubin oxidase immobilized onto porous aminopropyl glass beads via glutaraldehyde activation. In the presence of glucose, DMFe⁺ was reduced to DMFe by reacting with the reduced glucose oxidase (FADH₂), and the absorbance decrease was followed at 650 nm. In acetate pH 5.2 buffer, the response to glucose in blood serum was nonlinear, especially in the low concentration range, because of a competition for the reduced glucose oxidase between the DMFe⁺ dye and oxygen. At this pH, endogenous ceruloplasmin was also observed to oxidize residual DMFe (16%) in the dye preparation, causing an increase in absorbance at 650 nm. An assay protocol was then developed using maleate buffer, pH 6.5, to overcome these interferences as well as mutarotation of α-D-glucose. The results obtained for glucose in the blood serum samples agreed well with those of the reference hexokinase/glucose-6-phosphate dehydrogenase method.     

A Molecular Analogue of the C−H Activation Intermediate of the Silica-Supported Ga(III) Single-Site Propane Dehydrogenation Catalyst: Structure and XANES Signature

Propane dehydrogenation is an important field of research due to an increasing world-wide demand of propene while classical production routes through naphtha cracking are in decline. In that context, silica-supported Ga(III) sites, synthesized from surface organometallic chemistry principles, show high selectivity and stability in the propane dehydrogenation reaction. This performance is in significant contrast to the reported fast deactivation and lower selectivity of most Ga₂O₃ and CrO₃ based materials. The Ga-catalyzed propane dehydrogenation reaction is proposed to proceed through the formation of Ga alkyl intermediates for which it would be desirable to have detailed structural and spectroscopic information. Here, we prepare a consistent series of Ga(III) molecular complexes with varying numbers of alkyl and siloxide ligands; they are characterized by single crystal X-Ray diffraction and X-Ray Absorption Near Edge Structure analysis, which is known to be highly sensitive to the Ga coordination environment. We report in particular the structure and the spectroscopic signatures of [Ga(ⁱPr)(OSi(O^tBu)₃)₂(HOSi(O^tBu)₃)], a molecular mimic of the key proposed reaction intermediates in the Ga-catalyzed PDH reaction.     

Artificial metalloenzymes: The powerful alliance between protein scaffolds and organometallic catalysts

1. Download : Download high-res image (275KB)
2. Download : Download full-size image

     

A Simple Procedure for the Rapid Determination of the Bulk Constituents of Certain Insulation Materials

The analysis of thermal insulation materials by optical microscopy has centered on the identification of fibrous constituents and not the bulk insulation. To enhance the identification of insulation, procedures were developed using chemical spot tests and microscopical observations that included dispersion staining to characterize the matrix material.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

Photophysics of carbazole-containing systems. 1. Dilute solution behavior of poly(N-vinyl carbazole) and N-vinyl carbazole/methyl acrylate copolymers

Steady-state and time-resolved fluorescence techniques have been used to study the photophysical behaviors of poly(N-vinyl carbazole), PNVCz and a series of N-vinyl carbazole-methyl acrylate (NVCz-co-MA) copolymers in dilute solution as a function of both NVCz composition and temperature. A kinetic scheme, intended to describe intramolecular excimer formation across the entire NVCz composition range, is proposed. In low aromatic content copolymers, two monomer species (unquenched and quenched monomer) and two excimer species (the sandwich-like excimer and a higher energy excimer) exist. The contribution from monomer emission to the overall fluorescence decreases with increasing NVCz content through increased excimer formation: this is likely to be consequent upon (1) an increase in the number of excimer forming sites, and (2) increasing efficiency of energy transfer from the excited monomers to the excimer forming sites. In the homopolymer, PNVCz, the only emission that can be observed on a nanosecond timescale is excimeric. This fluorescence appears to originate from three excimer species (the sandwich-like excimer, and two higher energy forms). For the homopolymer, the current observations are consistent with the model proposed by Vandendriessche and De Schryver [Polym. Photochem. 7 , 153 (1986)]. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 963–978, 1997     

Quantum yield of the iodide-iodate chemical actinometer: dependence on wavelength and concentrations

The quantum yield (QY) of the iodide-iodate chemical actinometer (0.6 M KI-0.1 M KIO3) was determined for irradiation between 214 and 330 nm. The photoproduct, triiodide, was determined from the increase in absorbance at 352 nm, which together with a concomitant measurement of the UV fluence enabled the QY to be calculated. The QY at 254 nm was determined to be 0.73 +/- 0.02 when calibration was carried out against a National Institute of Standards and Technology traceable radiometer or photometric device. At wavelengths below 254 nm the QY increased slightly, leveling off at -0.80 +/- 0.05, whereas above 254 nm the QY decreases linearly with wavelength, reaching a value of 0.30 at 284 nm. In addition, the QY was measured at different iodide concentrations. There is a slight decrease in QY going from 0.6 to 0.15 M KI, whereas below 0.15 M KI the QY drops off sharply, decreasing to 0.23 by 0.006 M KI. Calibration of the QY was also done using potassium ferrioxalate actinometry to measure the irradiance. These results showed a 20% reduction in QY between 240 and 280 nm as compared with radiometry. This discrepancy suggests that the QY of the ferrioxalate actinometer in this region of the spectrum needs reexamination.