Multiple-Edge XAS Studies of Synthetic Iron-Copper Bridged Molecular Assemblies Relevant to Cytochrome c Oxidase. Structure Determination Using Multiple-Scattering Analysis with Statistical Evaluation of Errors

An X-ray absorption spectroscopy study has been carried out at the Fe and Cu K-edges for two bridged molecular assemblies, both of which contain an Fe-X-Cu (X = O(2)(-), OH(-)) bridge unit, some of whose features are relevant to the binuclear site of cytochrome c oxidase. The two complexes [(OEP)Fe-O-Cu(Me(6)tren)](1+) and [(OEP)Fe-(OH)-Cu(Me(5)tren)(OClO(3))](1+) have similar structural fragments around the metal centers except that they differ significantly in the bridge structure (the former contains a linear oxo bridge while the latter has a bent hydroxo bridge). We report a comparative study of these complexes using multiple-scattering (MS) EXAFS analysis and the program package GNXAS. It is found that there is a dramatic increase in the amplitude of the Fe-X-Cu MS pathway as the bridge unit approaches linearity. Full EXAFS MS analysis enables accurate quantitation of bridge metrical details and geometry for both complexes. These studies were done with an expanded version of GNXAS, which allows for simultaneous multiple-edge fitting. Such multiple-edge analysis (using both Fe and Cu edge data) allows common pathways (in this case involving the Fe-X-Cu bridge) to be constrained to be the same, thus improving the observation/variable ratio and enhancing sensitivity for determination of the bridge structure. The accuracy of the structural determination for the bridge units is evaluated by a statistical analysis methodology in which correlations among fitting parameters are identified and contour plots are used to determine random error. The overall error in the EXAFS structural determination is found by establishing the variance with the crystallographically determined values: for the EXAFS-determined parameters at distances below 4 ?, distances and angles deviated on average from crystallographic values by 0.014 ? and 1.5 degrees, respectively. It is also established that structural features in the Fe absorption preedge are diagnostic of oxo vs hydroxo ligation. The relevance of this study to the structural definition of binuclear bridged sites in cytochrome c oxidase and other metalloenzymes is considered.     

Spectroscopic studies of the interaction of ferrous bleomycin with DNA

Bleomycin is an antibiotic used in cancer chemotherapy for its ability to achieve both single- and double-strand cleavage of DNA through abstraction of the deoxyribose C4'-H. Magnetic circular dichroism (MCD) and X-ray absorption (XAS) spectroscopies have been used to study the interaction of the biologically relevant FeIIBLM complex with DNA. Calf thymus DNA was used as the substrate as well as short oligonucleotides, including one with a preferred 5'-G-pyrimidine-3' cleavage site [d(GGAAGCTTCC)2] and one without [d(GGAAATTTCC)2]. DNA binding to FeIIBLM significantly perturbs the FeII active site, resulting in a change in intensity ratio of the d d transitions and a decrease in excited-state orbital splitting (5Eg). Although this effect is somewhat dependent on length and composition of the oligonucleotide, it is not correlated to the presence of a 5'-G-pyrimidine-3' cleavage site. No effect is observed on the charge-transfer transitions, indicating that the H-bonding recognition between the pyrimidine and guanine base does not perturb Fe-pyrimidine backbonding. Azide binding studies indicate that FeIIBLM bound to either oligomer has the same affinity for N3-. Parallel studies of BLM structural derivatives indicate that FeIIiso-PEPLM, in which the carbamoyl group is shifted on the mannose sugar, forms the same DNA-bound species as FeIIBLM. In contrast, FeIIDP-PEPLM, in which the -aminoalanine group is absent, forms a new species upon DNA binding. These data are consistent with a model in which the primary amine from the -aminoalanine is an FeII ligand and the mannose carbamoyl provides either a ligand to the FeII or significant second-sphere effects on the FeII site; intercalation of the bithiazole tail into the double helix likely brings the metal-bound complex close enough to the DNA to create steric interactions that remove the sugar groups from interaction with the FeII. The fact that the FeII active site is perturbed regardless of DNA sequence is consistent with the fact that cleavage is observed for both 5'-GC-3' and nonspecific oligomers and indicates that different reaction coordinates may be active, depending on orientation of the deoxyribose C4'-H.     

A novel class of phosphorescent gold(III) alkynyl-based organic light-emitting devices with tunable colour

A novel class of luminescent cyclometalated gold(III) alkynyl complexes has been demonstrated to possess EL properties and has been employed in the roles of electrophosphorescent emitters or dopants of organic light-emitting diodes (OLEDs) with high brightness and efficiency.     

Design and synthesis of asymmetric acyclic phospholipid bolaamphiphiles

[structure: see text] A synthetic route was devised for the generation of asymmetric lipid bolaamphiphiles through the sequential esterification of an alkyldioic acid, bearing distinct terminal protecting groups, with propanylamine and lyso-phosphatidylcholine headgroups. Bolaamphiphile self-assembly was investigated in solvent mixes of varying polarity by nuclear magnetic resonance (NMR) and Fourier transform-infrared (FT-IR) spectroscopy, as well as in water by cryo-high-resolution scanning electron microscopy (cryo-HRSEM). We anticipate that asymmetric lipid bolaamphiphiles will provide facile building blocks for engineering a variety of unique membrane-mimetic structures.     

Absorption and emission spectra of Ce3+ in elpasolite lattices

The experimental determination of the electronic energy levels for Ce(3+) in some chloroelpasolite hosts for both the ground 4f(1) and the excited 5d(1) configurations is described. High-resolution f-f absorption and f-(2)T(2g) d absorption and emission spectra have been recorded at low temperatures for Ce(3+) diluted into various hexachloroelpasolite lattices. A fluorescence spectrum at approximately 50 000 cm(-1) is tentatively assigned to the emission from the highest 5d crystal field level, (2)E(g), of a Ce(3+) impurity in Cs(2)NaErCl(6), enabling the values of all the energy levels of both the 4f(1) and 5d(1) configurations to be given for Ce(3+) in elpasolite hosts. Vibronic structure superimposed on the electronic transitions is analyzed in terms of a simple configurational coordinate model involving the ground and excited configurations. It is found that the difference in the Ce-Cl bond length between the 4f(1) and 5d(1) configurations is approximately 0.04 A. Ab initio model potential calculations on the (CeCl(6))(3-) cluster embedded in a reliable representation of the Cs(2)NaYCl(6) host support these conclusions.     

Catalytic enantioselective pyrrole alkylations of alpha,beta-unsaturated 2-acyl imidazoles

[reaction: see text] Enantioselective additions of pyrroles to alpha,beta-unsaturated 2-acyl imidazoles catalyzed by the bis(oxazolinyl)pyridine-scandium(III) triflate complex (1) have been accomplished. The alpha,beta-unsaturated 2-acyl imidazoles were synthesized in high yields through Wittig olefination. A short, enantioselective synthesis of the alkaloid (+)-heliotridane has been accomplished utilizing this methodology and a 2-acyl imidazole cleavage and cyclization. This methodology was then extended to the one-pot asymmetric synthesis of 2-substituted indoles.     

Critical flocculation density of dilute water-in-CO2 emulsions stabilized with block copolymers

The critical flocculation density (CFD), that is, the CO(2) density below which flocculation occurs, was studied for dilute water-in-CO(2) (W/C) miniemulsions stabilized with poly(1,1-dihydroperfluorooctyl methacrylate)-b-poly(ethylene oxide) (PFOMA-b-PEO) surfactants. The CFD, which was measured by turbidimetry, decreased as the PFOMA molecular weight was increased, the average droplet size was decreased, the surfactant loading was increased, and the temperature was increased. A simple model, which addressed both the van der Waals attraction between droplets and osmotic solvent-tail interactions, was in good qualitative agreement with the experimentally observed trends for the CFD and predicted a decrease in emulsion stability as the CO(2) density was lowered toward the theta density for PFOMA in bulk CO(2).     

Ortho-substituted catechol derivatives: the effect of intramolecular hydrogen-bonding pathways on chloride anion recognition

This paper reports a series of chloride anion receptors containing two catechol head groups connected through their ortho-positions via a spacer chain. The linking group chosen to attach the spacer chain to the catechol units has a major impact on the anion-binding potential of the receptor. Linking groups that are capable of forming stable six-membered intramolecular hydrogen-bonded rings with the catechol O-H groups significantly inhibit the ability of the catechol units to hydrogen bond to chloride anions. However, where the linking groups are only capable of forming five- or seven-membered intramolecular hydrogen-bonded rings, then anion binding via hydrogen bonding through the catechol O-H groups becomes a possibility. This process is solvent dependent; the presence of competitive solvent (e.g., DMSO-d6) disrupts the intramolecular hydrogen-bonding pattern and enhances anion binding relative to simple unfunctionalized catechol. The most effective receptor is that in which the hydrogen-bonding linker (-CH2CONH-) is most distant from the catechol units and can only form a seven-membered intramolecular hydrogen-bonded ring. In this case, the receptor, which contains two catechol units, is a more effective chloride anion binder than simple unfunctionalized catechol, demonstrating that the two head groups, in combination with the N-H groups in the linker, act cooperatively and enhance the degree of anion binding. In summary, this paper provides insight into the hydrogen-bonding patterns in ortho-functionalized catechols and the impact these have on the potential of the catechol O-H groups to hydrogen bond to a chloride anion.     

Direct identification and decongestion of Fermi resonances by control of pulse time ordering in two-dimensional IR spectroscopy

We show that it is possible to both directly measure and directly calculate Fermi resonance couplings in benzene. The measurement method used was a particular form of two-dimensional infrared spectroscopy (2D-IR) known as doubly vibrationally enhanced four wave mixing. By using different pulse orderings, vibrational cross peaks could be measured either purely at the frequencies of the base vibrational states or split by the coupling energy. This capability is a feature currently unique to this particular form of 2D-IR and can be helpful in the decongestion of complex spectra. Five cross peaks of the ring breathing mode nu13 with a range of combination bands were observed spanning a region of 1500-4550 cm(-1). The coupling energy was measured for two dominant states of the nu13+nu16 Fermi resonance tetrad. Dephasing rates were measured in the time domain for nu13 and the two (nu13+nu16) Fermi resonance states. The electronic and mechanical vibrational anharmonic coefficients were calculated to second and third orders, respectively, giving information on relative intensities of the cross peaks and enabling the Fermi resonance states of the combination band nu13+nu16 at 3050-3100 cm(-1) to be calculated. The excellent agreement between calculated and measured spectral intensities and line shapes suggests that assignment of spectral features from ab initio calculations is both viable and practicable for this form of spectroscopy.     

S K-edge XAS and DFT calculations on square-planar NiII-thiolate complexes: effects of active and passive H-bonding

S K-edge XAS for a low-spin NiII-thiolate complex shows a 0.2 eV shift to higher pre-edge energy but no change in Ni-S bond covalency upon H-bonding. This is different from the H-bonding effect we observed in high-spin FeIII-thiolate complexes where there is a significant decrease in Fe-S bond covalency but no change in energy due to H-bonding (Dey, A.; Okamura, T.-A.; Ueyama, N.; Hedman, B.; Hodgson, K. O.; Solomon, E. I. J. Am. Chem. Soc. 2005, 127, 12046-12053). These differences were analyzed using DFT calculations, and the results indicate that two different types of H-bonding interactions are possible in metal-thiolate systems. In the high-spin FeIII-thiolate case, the H-bonding involves a thiolate donor orbital which is also involved in bonding with the metal (active), while in the low-spin NiII-thiolate, the orbital involved in H-bonding is nonbonding with respect to the M-S bonding (passive). The contributions of active and passive H-bonds to the reduction potential and Lewis acid properties of a metal center are evaluated.