Total synthesis of (+/-)-stemodinone via an efficient ring-exchange strategy

A total synthesis of (+/-)-stemodinone, a tetracyclic stemodane diterpene, from the known tricyclic methyl olefin 11 is described. The key steps involve an efficient ring-exchange reaction and palladium(0)-catalyzed lactone migration. The ring-exchange strategy for controlling the stereochemistry was based on an initial Diels-Alder reaction to form a new ring followed by cleavage of the original ring. Cleavage of the original ring of the Diels-Alder adduct 9 was achieved by an initial regio- and chemoselective Baeyer-Villiger oxidation followed by the Pd(0)-catalyzed lactone-migration reaction reported by us.     

Nitrogen adsorption on fluorinated activated carbon fiber

Nitrogen adsorption isotherms for fluorinated activated carbon fiber (F-ACF) and fluorinated carbon black (F-CB) were measured at 77 K. Surface structures of F-ACF and F-CB were examined by _s -plot analysis using the adsorption data on the nonporous carbon black (CB) and F-CB. The surface energy of F-ACF was lower than that of ACF. The micropore structure of ACF was preserved even after fluorination, although the limiting adsorption amount and the micropore width decreased with fluorination.     

Optimization of a multi-residue screening method for the determination of 85 pesticides in selected food matrices by stir bar sorptive extraction and thermal desorption GC-MS

A multi-residue method to determine 85 pesticides, including organochlorine pesticides, carbamates, organophosphorus pesticides, and pyrethroids, in vegetables, fruit, and green tea, has been developed. The method is based on stir bar sorptive extraction (SBSE) coupled to thermal desorption (TD) and retention time locked (RTL) GC-MS operating in the scan mode. Samples are extracted with methanol and diluted with water prior to SBSE. Dilution of the methanol extract before SBSE was optimized to obtain high sensitivity and to minimize adsorption onto the glass wall of the extraction vessel as well as to minimize sample matrix effects (particularly for the pesticides with high log K(o,w) values). The optimized method consists of a dual SBSE extraction performed simultaneously on respectively a twofold and a fivefold diluted methanol extract. After extraction, the two stir bars are placed in a single glass thermal desorption liner and are simultaneously desorbed. The method showed good linearity (r2 > 0.9900) and high sensitivity (limit of detection: < 5 microg kg(-1)) for most of the target pesticides. The method was applied to the determination of pesticides at low microg kg(-1) in tomato, cucumber, green soybeans, spinach, grapes, and green tea.     

Synthesis of (±)‐Kempa‐6,8‐dien‐3‐ol (=(2aRS,3SR,4aSR,7RS,7aSR,10bSR,10cSR)‐2,2a,3,4,4a,5,6,7,7a,8,10b,10c‐Dodecahydro‐2a,7,10,10c‐tetramethylnaphth[2,18‐cde]azulen‐3‐ol)

The synthesis of kempa‐6,8‐dien‐3β‐ol ( 4a ), as a synthetic leading model of the natural product 4b , was carried out starting from intermediate 12 , the synthetic route of which has been developed previously (Scheme 1). The conversion of 12 to the model compound 4a involved the elaboration of three structure modifications by three processes, Tasks A, B, and C (see Scheme 2). Task A was achieved by epoxy‐ring opening of 41 with Me₃SiCl (Scheme 9), and Task B being performed by oxidation at the 13‐position, followed by hydrogenation, and then epimerization (Schemes 4 and 5). The removal of the 2‐OH group from 12 (Task C) was achieved via 30b according to Scheme 6, whereby 30b was formed exclusively from 30a / 31a 1 : 1 (Scheme 7). In addition, some useful reactions from the synthetic viewpoint were developed during the course of the present experiments.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.     

The satellite-shaped Co-15 Polyoxotungstate, [Co6(H2O)30{Co9Cl2(OH)3(H2O)9(beta-SiW8O31)3}]5-

The 15-cobalt-substituted polyoxotungstate [Co(6)(H(2)O)(30){Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}](5-) (1) has been characterized by single-crystal XRD, elemental analysis, IR, electrochemistry, magnetic measurements, and EPR. Single-crystal X-ray analysis was carried out on Na(5)[Co(6)(H(2)O)(30){Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}].37H(2)O, which crystallizes in the hexagonal system, space group P6(3)/m, with a = 19.8754(17) A, b = 19.8754(17) A, c = 22.344(4) A, alpha= 90 degrees, beta = 90 degrees, gamma = 120 degrees, and Z = 2. The trimeric polyanion 1 has a core of nine Co(II) ions encapsulated by three unprecedented (beta-SiW(8)O(31)) fragments and two Cl(-) ligands. This central assembly {Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}(17-) is surrounded by six antenna-like Co(II)(H(2)O)(5) groups resulting in the satellite-like structure 1. Synthesis of 1 is accomplished in a simple one-pot procedure by interaction of Co(II) ions with [gamma-SiW(10)O(36)](8-) in aqueous, acidic NaCl medium (pH 5.4). Polyanion 1 was studied by cyclic voltammetry as a function of pH. The current intensity of its Co(II) centers was compared with that of free Co(II) in solution. Our results suggest that 1 keeps its integrity in solution. Magnetic susceptibility results show the presence of both antiferro- and ferromagnetic coupling within the (Co(II))(9) core. A fully anisotropic Ising model has been employed to describe the exchange-coupling and yields g = 2.42 +/- 0.01, J(1) = 17.0 +/- 1.5 cm(-1), and J(2) = -13 +/- 1 cm(-(1). Variable frequency EPR studies reveal an anisotropic Kramer's doublet.     

Multi-element determinations of trace elements in glass by instrumental photon activation analysis

An instrumental photon activation method is reported for multi-element determinations in glass. The concentrations of 17 elements in NBS standard glass can be determined by irradiation with 30-MeV bremsstrahlung and measurement of the resulting γ-rays with a Ge(Li) detector. The average of all relative standard deviations is 2.7%; the relative deviations from the NBS certified values range from 1.4 to 3.4%.     

Trans-cis Photoisomerization of 1-Methyl-4-(4′-hydroxystyryl)pyridinium in inclusion complexes ofβ-cyclodextrin and its derivatives

The effects of -cyclodextrin (-CyD), heptakis(2,6-di-O-methyl)--cyclodextrin (DMCyD) and heptakis(2,3,6-tri-O-methyl)--cyclodextrin (TMCyD) ontrans-cis photoisomerization of 1-ethyl-4-(4-hydroxystyryl)pyridinium (POH) have been studied in aqueous solutions. The ratio of [cis]/[trans] for POH in the photostationary state at pH 8.54 was remarkably reduced by the presence of CyD or DMCyD. The reduction of the [cis]/[trans] ratio in the photostationary state was explained in terms of the shift of the equilibrium of POH ₊ ^trans PO _trans + H^– toward PO _trans formation. The binding constants of CyD and DMCyD for PO _trans were 2.00- and 1.36-fold larger than those for POH ₊ ^trans , respectively. The binding constants of TMCyD for both species are much smaller than those of CyD and DMCyD. This result indicates that PO _trans , which has a betain structure, forms stable complexes with CyD and DMCyD with its hydrophobic parts inside and the charged parts outside the CyD cavities.     

Freezing of Lennard-Jones fluid in cylindrical nanopores under tensile conditions

We have shown the Lennard-Jones (LJ) phase diagram for a slit-shaped nanopore by molecular simulations and thermodynamically predicted the results with no adjustable parameter. With this success, LJ phase diagrams are predictable. In this study, the freezing of an LJ CH₄ capillary condensate under a tensile condition in a nonstructural carbon nanopore with a cylindrical geometry was examined using molecular dynamics (MD) simulation. We employ a unit cell in contact with a bulk vapor phase, which is useful for the determination of the bulk vapor pressure in equilibrium with the molecules in a pore. The MD simulation results show liquid-solid (amorphous) phase transitions with a variation in the bulk vapor pressure. The frozen particles are arranged in concentric circular regions along the wall similar to those reported by Maddox and Gubbins. The freezing points are determined from the variations in density, enthalpy, arrangement, and structural functions. The obtained liquid-solid coexistence points are found to exhibit a significant dependence of the freezing point on the equilibrium bulk vapor pressure, forming an extraordinarily skewed curve on the p-T diagram, in contrast to the bulk phase coexistence that is represented by an almost vertical line. The origin of the significant dependence is considered to be the Laplace effect on the capillary condensate similar to the case with a slit-shaped pore. A simple model, which the authors earlier presented for slit-shaped nanopores, successfully predicted the p-T relation of the freezing point for cylindrical nanopores as well.