Reactions of V-Substituted Polyoxometalates with L-Cysteine

Three polyoxometalates (POMs), (X=P or As) and , in their oxidized and reduced forms, were selected for direct reaction or electrocatalytic reaction with L-cysteine, because they have the most negative formal potentials among those POMs active for the desired reaction. The good linearity of the UV–Visible calibration curve obtained for the reaction of α₂-[P₂V^VW₁₇O₆₂]⁷⁻ with L-cysteine indicates both a simple 1:1 stoichiometry for the process and the possibility to select a wavelength domain in which the one-electron reduced forms of this POM is the only strongly absorbing species in the mixture. Another general result among the three selected POMs is the existence, in each example, of a sharp isosbestic point during the recording of individual spectrakinetics using a photodiode array system. The kinetics could be fitted accuretely to a mono-exponential rate equation and the rate constants were determined. Electrocatalysis of the oxidation of L-cysteine was carried out in the presence of α₂-[H₄P V^IVW₁₇O₆₂]⁹⁻ as an example. The rate constant measured by chronocoulometry for this system compares favourably with that extracted from stopped flow experiments.Dedicated in honor of Professor Michael T. Pope on the occasion of his retirement.     

Immunological Evaluation of Co-Assembling a Lipidated Peptide Antigen and Lipophilic Adjuvants: Self-Adjuvanting Anti-Breast-Cancer Vaccine Candidates

Co-assembling vaccines composed of a lipidated HER2-derived antigenic CH401 peptide and either a lipophilic adjuvant, Pam₃CSK₄, α-GalCer, or lipid A 506, were evaluated as breast cancer vaccine candidates. This vaccine design was aimed to inherit both antigen multivalency and antigen-specific immunostimulation properties, observed in reported self-adjuvanting vaccine candidates, by using self-assembly and adjuvant-conjugated antigens. Under vaccination concentrations, respective lipophilic adjuvants underwent co-assembly with lipidated CH401, which boosted the anti-CH401 IgG and IgM production. In particular, α-GalCer was responsible for the most significant immune activation. Therefore, the newly developed vaccine design enabled the optimization of adjuvants against the antigenic CH401 peptide in a simple preparatory manner. Overall, the co-assembling vaccine design opens the door for efficient and practical self-adjuvanting vaccine development.     

3-Nitro-l,2,4-triazol-l-yl-tris(pyrrolidin-1-yl)phosphonium hexafluorophosphate (PyNTP) as a condensing reagent for solid-phase peptide synthesis

Solid-phase oligopeptide synthesis has been well developed and most short oligopeptides can now be easily synthesized. However, when a desired oligopeptide forms a secondary structure or includes less reactive amino acids such as aminoisobutyric acid, its terminal amino groups become less reactive and synthesis of the desired oligopeptides becomes difficult. To expand the number of synthetic peptide sequences, we have developed efficient coupling conditions using 3-nitro-l,2,4-triazol-l-yl-tris(pyrrolidin-1-yl)phosphonium hexafluorophosphate (PyNTP) as a highly reactive condensing reagent on an unswellable solid support. PyNTP demonstrated higher reactivity than conventional condensing reagents and the optical purity of the synthesized oligopeptides was sufficiently high for application to general oligopeptide synthesis.     

Anionic Polymerization Behavior of α-Methylene-N-methylpyrrolidone

Anionic polymerization of α-methylene-N-methylpyrrolidone ( MMP ) was carried out in THF at −78∼0 °C with diphenylmethylpotassium (Ph₂CHK) and with diphenylmethyllithium (Ph₂CHLi) in the presence of Lewis acidic diethylzinc (Et₂Zn). Poly( MMP )s possessing predicted molecular weights based on the molar ratios between monomer and initiators and narrow molecular weight distributions (M_w/M_n < 1.1) were obtained in quantitative yields. It was demonstrated that the propagating chain end of poly( MMP ) was stable at −30 °C to form the polymers with well-defined chain structures. From the polymerizations at the various temperatures ranging from −50 to −30 °C, the apparent rate constant and the activation energy of the polymerization were estimated as follows: ln k = −6.93 × 10³/T + 25.7 and 57 ± 5 kJ mol⁻¹, respectively.     

Control of nitrogen doping in NaTaO3 synthesized by hydrothermal reaction and chemical state of nitrogen

Nitrogen-doped NaTaO₃ was synthesized through 1-pot reaction, hydrothermal process using Ta₃N₅ as precursor. Changing concentration and amount of NaOH aqueous solution influenced nitrogen content in NaTaO₃. Absorption edge of nitrogen-doped NaTaO₃ was extended at 570 nm, and absorbance in visible light region depended on nitrogen content in NaTaO₃. Anodic photocurrent measured under visible light irradiation became larger with increasing nitrogen content in NaTaO_3-xN_y. Under ultraviolet light irradiation (λ ≤ 400 nm), the highest anodic photocurrent was observed when nitrogen concentration was y = 0.024. It was possible to expand the wavelength range that can be effectively utilized for the photoelectrochemical reaction.     

Syntheses, crystal structures and Si solubilities of new layered carbides Zr2Al4C5 and Zr3Al4C6

Two types of new ternary carbides, Zr₂Al₄C₅ and Zr₃Al₄C₆, have been synthesized and characterized by X-ray powder diffraction. The crystal structures were refined from laboratory X-ray powder diffraction data (CuKα₁) using the Rietveld method. These carbides form a homologous series with the general formula (ZrC)_mAl₄C₃ (m=2 and 3). The crystal structures can be regarded as intergrowth structures where the Al₄C₃-type [Al₄C₄] layers are the same, while the NaCl-type [Zr_mC_m+1] layers increase in thickness with increasing m value. The new carbides are most probably the end members of continuous solid-solutions (ZrC)_m[Al_4−xSi_x]C₃ with 0?x?0.44.     

Synthesis of methylcellulose model copolymers with heterogeneous distribution and their solution properties

In order to elucidate the characteristic features of commercial methylcellulose precisely, O-methylcellulose model copolymers consisting of 2,3,6-tri-O-methylanhydroglucose unit (236MeAGU) and 2-O-methylanhydroglucose unit (2MeAGU) with various composition ratios were synthesized via cationic ring-opening copolymerization of the corresponding glucose orthoester derivatives, subsequent removal of pivaloyl and allyl groups, and methylation. The structure of the obtained copolymers was confirmed by ¹H-, ¹³C-NMR, and FT-IR. Temperature-dependent turbidity measurement verified their thermoresponsive behavior in aqueous solution. The lower critical solution temperature was tuned from 63 to 45 °C above 47 mol-% 236MeAGU content. The hydrophobicity along the cellulose chain was dominant to determine their physical properties. However, the aqueous properties of the MC model copolymers were strongly affected by the slight difference of the composition ratio. The present method would provide further details of the structure–property relationship of O-methylcellulose.     

Determination of musty odorants, 2-methylisoborneol and geosmin, in environmental water by headspace solid-phase microextraction and gas chromatography--mass spectrometry.

A simple and sensitive method for the determination of musty odorants, 2-methylisoborneol (MIB) and geosmin (GSM), in environmental water was developed by headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry. MIB and GSM were separated within 10 min using a DB-1 capillary column and detected in the selective ion monitoring mode. HS-SPME using a polydimethylsiloxane/divinylbenzene fiber provided effective sample enrichment, and was carried out by fiber exposition at 70 degrees C for 30 min. Using this method, the calibration curves of MIB and GSM were linear in the range of 0-500 pg/mL, with a correlation coefficient above 0.9977 (n=24). The detection limits (S/N=3) of MIB and GSM were 0.9 and 0.6 pg/mL, respectively. This method was successfully applied to the analysis of environmental water samples without interference peaks.     

An improved method for the measurement of the isotope ratio of ethanol in various samples, including alcoholic and non-alcoholic beverages

The isotope ratios of ethanol, an important constituent or ingredient of some foods and various beverages and fuels, provide information about biological and geographical origin and quality. We have developed an improved method for measuring the isotope ratio of ethanol in various samples by gas chromatography-high temperature conversion or combustion-isotope ratio mass spectrometry (GC-TC/C-IRMS) with headspace solid-phase microextraction (HS-SPME). A HS-SPME method was developed by optimizing several different parameters, including salt addition, incubation temperature and time, and extraction time. The HS-SPME method enabled us to determine the isotope ratio at low ethanol concentrations (0.08 mM) in 50 min with good precision (+/-0.3 per thousand for delta(13)C and +/-5 per thousand for deltaD). An advantage of this technique is that it can be adapted for use with samples which have high viscosity and contain many matrix compounds, such as alcoholic and non-alcoholic beverages.