Evaluation of hydrophobic properties of sodium dodecylsulfate/γ-alumina admicelles based on fluorescence spectra of N-phenyl-1-naphthylamine

Some molecular probes, whose fluorescence spectra were responsive to the polarity, were tested for monitoring the formation of admicelles. N-Phenyl-1-naphthylamine (PN) was the best choice for evaluating the hydrophobicity of sodium dodecylsulfate (SDS)/γ-alumina admicelles. The fluorescence intensity of PN in the aqueous suspension of the admicelles enhanced in the SDS concentration far below its critical micelle concentration. The intensity was greater than that in the normal SDS micellar system. Additionally, the wavelength at the maximum intensity of the fluorescence in the admicellar system was shorter than that in the micellar solution. These facts strongly suggest that the admicelles provide more hydrophobic environment than conventional micellar media. Comparison of the wavelength with those in several solvents indicated that the admicelles have hydrophobic properties corresponding to 1-octanol or ethyl acetate.     

Effect of carrier concentration on the facilitated oxygen transport in a polymer membrane

Facilitated transport of oxygen in a solid Polymer membrane containing cobaltporphyrin (CoP) which carries oxygen specifically and reversibly, leads to permselectivity of oxygen against nitrogen in the membrane. The increase in concentration of the CoP carrier is expected to enhance the oxygen transport. The membranes of poly(octylmethacrylate-co-vinylimidazole) containing 0.8 ～ 10 wt% CoP were prepared, and the effects of the CoP-concentration on the transport and the diffusion constants of oxygen are studied. Although the induction period before the steady state of oxygen permeation was prolonged with the CoP concentration in the polymer membrane, the glass transition temperature (T_g) of the membrane was increased and the diffusion constants of oxygen were decreased with the CoP concentration to yield unexpected reduction of the oxygen permeation in the highly CoP loaded membrane.     

Determination of nickel in water by electrothermal atomic absorption spectrometry with preconcentration on a tungsten foil

A preconcentration method for nickel in waters involving adsorption on tungsten foil, followed by electrothermal atomic absorption spectrometry (ETAAS) with a tungsten tube atomizer is described. The most suitable pH for nickel adsorption was 5 and the optimum immersion time was 2 min. Severe interferences from co-existing elements (Al, Ca, Cu, Fe, K, Mg, Na, Pb and Zn) on the Ni AA signal were observed. Under optimal conditions, the preconcentration of nickel on W foil could eliminate interferences from these elements. The detection limit of nickel by preconcentration-ETAAS was 0.1 ng/ml (3S/N). The method with preconcentration on tungsten foil was applied to the determination of nickel in river water. The recovery of spiked nickel was 93–102%. The tungsten foil preconcentration method is sensitive, simple, and convenient. This adsorption method can be utilized inin situ-sampling of ultra-trace nickel in environmental samples (water). Furthermore, after sampling it is easy to carry and store the W-foil without contamination for long time.     

How Are Hydrogen Bonds Perturbed in Aqueous NaClO4 Solutions Depending on the Concentration?: A Near Infrared Study of Water

We have performed spectroscopic measurements on the vibrational combination bands of OH-bending (ν₂) and asymmetric OH-stretching (ν₃) modes of water in aqueous NaClO₄ solutions with an absorption spectrometer in the near infrared region. The concentration dependence of the spectral shape of the ν₂ + ν ₃ band around the wavelength of 2 μm was investigated, where the NaClO₄ concentration was varied by a factor of 200. The spectral shape depends significantly on the concentration of NaClO₄ and the spectral width of the saturated aqueous solution becomes narrower to about half of that of pure water. The concentration dependence is analyzed from the viewpoint of water molecules with a different number of hydrogen bonds. The perturbation effect of ions on hydrogen bonds between water molecules is discussed.     

Structure, electrochemistry, and magnetism of the iron(III)-substituted Keggin dimer, [Fe6(OH)3(A-alpha-GeW9O34(OH)3)2]11-

The iron(III)-substituted tungstogermanate [Fe6(OH)3(A-alpha-GeWO34(OH)3)2]11- (1) has been synthesized and characterized by IR, elemental analysis, SQUID magnetometry, electron paramagnetic resonance (EPR), and electrochemistry. Single-crystal X-ray analysis was carried out on Cs4Na7[Fe6(OH)3(A-alpha-GeW9O34(OH)3)2] x 30H2O, which crystallizes in the monoclinic system, space group C2/m, with a = 36.981(4) A, b = 16.5759(15) A, c = 16.0678(15) A, beta = 95.311(3) degrees, and Z = 4. Polyanion 1 consists of two (A-alpha-GeW9O34) Keggin moieties linked via six Fe3+ ions, leading to a double-sandwich structure. The equivalent iron centers represent a trigonal prismatic Fe6 fragment, resulting in virtual D3h symmetry for 1. Electrochemistry studies revealed that 1 is stable in solution from pH 3 to at least pH 7. In pH = 3 media the reduction of the six Fe3+ centers was featured by a single voltammetric wave for most supporting electrolytes used. In that case, whatever the scan rate from 1000 mV x s(-1) down to 2 mV x s(-1), no splitting of the single Fe-wave of 1 was observed. The acetate medium induced a partial splitting of the wave, and this separation is enhanced with increasing pH. Remarkable efficiency of 1 in the electrocatalytic reduction of nitrite, nitric oxide, and nitrate is demonstrated. Magnetic susceptibility (chi) measurements indicate a diamagnetic (S(T) = 0) ground state, with an average J = -12 cm(-1) and g = 2.00. EPR studies confirm that the ground state is indeed diamagnetic, since the EPR signal intensity steadily decreases without any line broadening as the temperature is lowered and becomes unobservable below about 50 K. The signal is a single broad peak at all frequencies (90-370 GHz), ascribed to the thermally accessible excited states. Its g(iso) is 1.992 51, as expected for a high-spin Fe3+-containing species, and supports the chi data analysis.     

First structurally characterized palladium(II)-substituted polyoxoanion: [Cs2Na(H2O)10Pd3(alpha-SbIIIW9O33)2]9-

The palladium-substituted tungstoantimonate(III) [Cs(2)Na(H(2)O)(10)Pd(3)(alpha-SbW(9)O(33))(2)](9-) (1) has been synthesized and characterized by IR, elemental analysis, and electrochemistry. Single-crystal X-ray analysis was carried out on Cs(3)KNa(5)[Cs(2)Na(H(2)O)(10)Pd(3)(SbW(9)O(33))(2)].16.5H(2)O, which crystallizes in the monoclinic system, space group P2(1)/m, with a = 13.3963(13) A, b = 19.5970(19) A, c = 18.1723(17) A, beta = 100.416(2) degrees, and Z = 2. Polyanion 1 represents the first structurally characterized palladium(II)-substituted polyoxometalate. The title polyoxoanion consists of two (alpha-Sb(III)W(9)O(33)) Keggin moieties linked via three Pd(2+) ions leading to a sandwich-type structure. The palladium centers are equivalent, and they are coordinated in a square-planar fashion. The central belt of 1 contains also one sodium and two cesium ions which reduces the symmetry of the polyanion to C(2)(v)(). Polyanion 1 was synthesized in good yield by reaction of Pd(CH(3)COO)(2) with Na(9)[SbW(9)O(33)] in aqueous acidic medium (pH 4.8). A cyclic voltammetry study of polyanion 1 in a pH 5 medium gives essentially the same characteristics as those observed for the deposition of Pd(0) on the glassy carbon electrode surface from Pd(2+) solutions. The film thickness increases with the number of potential cycles or the duration of potentiostatic electrolysis. The particularly sharp hydrogen sorption/desorption pattern indicates the excellent quality of the Pd(0) deposit from polyanion 1.     

The ruthenium(II)-supported heteropolytungstates [Ru(dmso)3(H2O)-XW11O39]6- (X = Ge, Si)

The novel Ru(II)-supported heteropolytungstates [Ru(dmso)(3)(H(2)O)XW(11)O(39)](6-)(X = Ge, Si) have been synthesized and characterized by single-crystal X-ray diffraction, multinuclear NMR ((183)W, (13)C, (1)H, (29)Si) and IR spectroscopy, elemental analysis and electrochemistry. The novel polyanion structure consists of a Ru(dmso)(3)(H(2)O) unit linked to a monolacunary [XW(11)O(39)](8-) Keggin fragment via two Ru-O-W bonds resulting in an assembly with C(1) symmetry. Polyanions 1 and 2 were synthesized by reaction of cis-Ru(dmso)(4)Cl(2) with [A-alpha-XW(9)O(34)](10-) in aqueous, acidic medium (pH 4.8). Tungsten-183 NMR of 1 leads to a spectrum with 11 peaks of equal intensity, indicating that the solid-state structure is preserved in solution. Electrochemistry studies revealed that 1 and 2 are stable in solution at least from pH 0 to 7, even in the presence of dioxygen. Their cyclic voltammetry patterns show mainly two two-electron reversible W-waves, those of the Si derivative 2 being located at slightly more negative potentials than those of the Ge derivative 1. The observed stability of 1 and 2 might be attributed to a stabilization of the Ru-center both by the strongly bound dmso ligands and the Keggin moiety. This stabilization drives the redox waves of Ru outside the accessible potential range. However, conditions were found to reveal, at least partially, the redox behavior of Ru in 1 and 2.     

Synthetic studies toward longeracemine: a SmI2-mediated spirocyclization and rearrangement cascade to construct the 2-azabicyclo[2.2.1]heptane framework

Longeracemine, a member of the Daphniphyllum family of alkaloids contains a novel carbon framework featuring a highly functionalized 2-azabicyclo[2.2.1]heptane core as part of an overall 5/6/5/5/6/5 skeleton. A synthetic intermediate containing the core of longeracemine has been efficiently prepared by employing a stereoselective SmI₂-mediated cascade reaction to advance a 7-azabicyclo[2.2.1]heptadiene to a 2-azabicyclo[2.2.1]heptene that is functionally poised for conversion to the natural product.

A synthetic intermediate containing the core of longeracemine, that is functionally poised for conversion to the natural product, has been efficiently prepared by employing a stereoselective SmI₂-mediated cascade reaction.     

Semi-vacant Wells-Dawson anions. Synthesis of tri-tungsten-vacant derivatives and crystallographic studies of [alphabetabetaalpha-(Cu(II)OH2)2(Cu(II))2(AsW15(OH2)3(OH)O52)2]12-

The tri-tungsten-vacant polyoxometalate, [alpha-AsW15(OH)4O52]13-, derived from the semi-vacant Wells-Dawson complex [alpha-AsW18(OH)4O58]7-, reacts with the late-transition metal cations, Cu(II) or Zn(II), to form sandwich-type species; the X-ray crystal structure of [alphabetabetaalpha]-(Cu(II)OH2)2(Cu(II))2(AsW15(OH2)3(OH)O52)2]12-, prepared by the acidification of [alphabetabetaalpha]-(Cu(II)OH2)2(Cu(II))2(AsW15(OH)4O52)2]18-, reveals that the missing heteroatoms are distal to the central Cu4 unit and the vertices of the vacant tetrahedron are occupied by one OH- and three OH2 groups.     

Détermination des forces perturbatrices d'un systeme oscillant à partir de son comportement en fréquence

Résumé La perturbation d'un oscillateur ne peut pas toujours être définie ou mesurée. Il est montré que moyennant une hypothèse plausible pour la perturbation une inversion de la méthode asymptotique en théorie des oscillations non-linéaires peut donner cette information cherchée. Les résultats sont appliqués au défaut d'isochronisme des montres.

---

The perturbations of an oscillating system cannot always be defined or measured. It is shown that, given a plausible hypothesis for the perturbation function, this information is obtained by an inversion of the asymptotic methods for the treatment of non-linear oscillations. The results are applied to the isochronism error of watches.

---

Zusammenfassung Störkräfte eines Oszillators sind nicht immer definierbar oder messbar. Es wird gezeigt, wie diese Kräfte mittels einer Umkehrung der asymptotischen Methode in der Theorie nicht-linearer Schwingungen erhalten werden, wenn für sie ein plausibler Ansatz gemacht wird. Die Resultate werden auf den Isochronismusfehler von Uhren angewandt.