2D computations of FREI with cool flames for n-heptane/air mixture

Two-dimensional axisymmetric numerical simulation reproduced flames with repetitive extinction and ignition (FREI) in a micro flow reactor with a controlled temperature profile with a stoichiometric n-heptane/air mixture, which have been observed in the experiment. The ignition of hot flame occurred from consumption reactions of CO that was remained in the previous cycle of FREI. Between extinction and ignition locations of hot flames, several other heat release rate peaks related to cool and blue flames were observed for the first time. After the extinction of the hot flame, cool flame by the low-temperature oxidation of n-heptane appeared first and was stabilized in a low wall temperature region. In the downstream of the stable cool flame, a blue flame by the consumption reactions of cool flame products of CH₂O and H₂O₂ appeared. After that, the hot flame ignition occurred from the remaining CO in the downstream of the blue flame. Then after the next hot flame ignition, the blue flame was swept away by the propagating hot flame. Soon before the hot flame merged with the stable cool flame, the hot flame propagation was intensified by the cool flame. After the hot flame merged with the stable cool flame, the hot flame reacted with the incoming fresh mixture of n-C₇H₁₆ and O₂.     

Synthesis and characterization of a biphenyl-linked hemicryptophane and an endohedral cobalt(II) complex

Hemicryptophanes are covalent molecular cages, constructed from a cyclotriveratrylene-based host unit and a functional unit linked by covalent spacers, which have been designed to accommodate endohedral functionalities in the cavity. In this study, the synthesis and characterization of the rigid, biphenyl-linked hemicryptophane 1 were investigated by NMR, ESI-MS, and X-ray crystallography. The structure of the inclusion complex, in which a dichloromethane molecule was constructed encapsulated within 1, was characterized by X-ray crystallography. An endohedral, cobalt(II) hemicryptophane complex 2 was also synthesized and characterized ESI-MS and X-ray crystallography. The X-ray crystal structure of 2 showed that the biphenyl-linked hemicryptophane had three components—a molecule each of chloroform and acetonitrile, and a cobalt(II) ion—within its cavity.     

Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.     

Origins of hole doping and relevant optoelectronic properties of wide gap p-type semiconductor, LaCuOSe

LaCuOSe is a wide band gap (～2.8 eV) semiconductor with unique optoelectronic properties, including room-temperature stable excitons, high hole mobility ～8 cm(2)/(Vs), and the capability of high-density hole doping (up to 1.7 × 10(21) cm(-3) using Mg). Moreover, its carrier transport and doping behaviors exhibit nonconventional results, e.g., the hole concentration increases with decreasing temperature and the high hole doping does not correlate with other properties such as optical absorption. Herein, secondary ion mass spectroscopy and photoemission spectroscopy reveal that aliovalent ion substitution of Mg at the La site is not the main source of hole doping and the Fermi level does not shift even in heavily doped LaCuOSe:Mg. As the hole concentration increases, the subgap optical absorption becomes more intense, but the increase in intensity does not correlate quantitatively. Transmission electron microscopy indicates that planar defects composed of Cu and Se deficiencies are easily created in LaCuOSe. These observations can be explained via the existence of a degenerate low-mobility layer and formation of complex Cu and Se vacancy defects with the assistance of generalized gradient approximation band calculations.     

Synthesis of β‐Methoxyacrylate Natural Products Based on Box‐PdII‐Catalyzed Intermolecular Methoxycarbonylation of Alkynoles

Bis(oxazoline)‐palladium(II) catalyzed carbonylation of homopropargyl alcohols afforded acyclic methoxyacrylate 2 and 6‐membered lactone 3a , 3b , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k in good combined yield. In the case of propargyl alcohols, 5‐membered lactones 3p , 3q , 16 were obtained in moderate yields. The one‐pot synthesis of kawa lactones 3a , 3r , 3s and formal synthesis of dihydroxycystothiazole A and dihydroxycystothiazole C are presented. To elucidate the stereochemistry of (+)‐annularin G and (?)‐annularin H, the first asymmetric syntheses of these natural products were achieved.     

Polarity determination of wurtzite-type crystals using hard x-ray photoelectron diffraction

The surface structure of a single-crystal ZnO wafer was studied by angle-resolved x-ray photoelectron spectroscopy (ARXPS) using synchrotron radiation. As a result, well-defined x-ray photoelectron diffraction (XPD) patterns were obtained for the (0001) and (000$\overline{1}$) polar surfaces using the photoemission from the Zn 2p_3/2 and O 1s core levels. The XPD patterns were indexed assuming forward scattering of photoelectrons by neighboring ions. Further, the XPD patterns for the (0001) and (000$\overline{1}$) surfaces were different from each other, indicating the possibility for using the XPD technique for polarity determination.     

Optical time-domain analog pattern correlator for high-speed real-time image recognition

The speed of image processing is limited by image acquisition circuitry. While optical pattern recognition techniques can reduce the computational burden on digital image processing, their image correlation rates are typically low due to the use of spatial optical elements. Here we report a method that overcomes this limitation and enables fast real-time analog image recognition at a record correlation rate of 36.7 MHz--1000 times higher rates than conventional methods. This technique seamlessly performs image acquisition, correlation, and signal integration all optically in the time domain before analog-to-digital conversion by virtue of optical space-to-time mapping.     

Synthesis of Highly Emissive Fluorophores Based on Multiply Stacked Anthracene Arrangement

Newly designed fluorophore systems with feather-like structures were constructed by connecting bisanthracene building units via a concise reaction sequence of bromination, etherification, and desilylation. Spectroscopic characterizations revealed that all of the fluorophore systems achieved high light absorptivity and high emission efficiency by preventing closely spaced anthracene chromophores from mutual interactions to reduce concomitant energy loss by fluorescence quenching. The application of fluorophore systems for the preparation of light-harvesting dyad materials has successfully demonstrated their potential utility as versatile photofunctional tools.