Infrared spectrum of trans-acrolein

The gas-phase infrared absorption spectrum of acrolein is observed from 4000 to 400 cm⁻¹ with a resolution of 0.06 or 0.03 cm⁻¹. The previously unlocated vinyl CH stretching band is observed at 3069 cm⁻¹ and its CH out-of-plane modes whose assignments have been in confusion are investigated in detail. The mode assignments of some other bands are revised on the basis of the calculated frequencies and relative intensities by an ab initio MO method.     

A new liquid membrane electrode for the selective determination of perrhenate

A new perrhenate ion-selective electrode has been developed, incorporating a nitrobenzene solution of nitron perrhenate as a liquid membrane. The electrode gives near-Nernstian response to 3 x 10(-5)-10(-2)M perrhenate over the pH range 3-8. Most common anions (except for periodate and perchlorate) give little interference. The electrode has been satisfactory for direct potentiometric determination of as little as 10 mu/ml rhenium. The average recovery and standard deviation were 99% and 2.1%, respectively. Measurements of the solubility products of some sparingly soluble perrhenates gave results that agreed closely with those recorded in the literature and obtained by other procedures.     

Calixarenes as second-sphere ligands for transition metal ions. Synthesis and crystal structure of [(H2O)5 Ni(NC5H5)]2(Na)[calix[4]arene sulfonate] · 3.5 H2O and [(H2O)4Cu(NC5H5)2]-(H3O)3 [calix[4]arene sulfonate] · 10 H2O

The title compounds crystallize such that bilayers of calixarenes are separated by hydrophilic layers. In each case the transition metal has, in addition to a primary sphere of ligands, a second-sphere coordination by a calixarene. [(H₂O)₅Ni(NC₅H₅)]₂(Na)[calix[4]arene sulfonate]·3.5 H₂O,1, crystallizes in the triclinic space groupP \(\bar 1\) witha = 12.487(4),b = 14.281(2),c = 15.055(5) Å, α = 85.66(2), β = 80.07(2), γ = 80.48(2)°, andD _c = 1.64 g cm^?3 forZ = 2. Refinement based on 2441 observed reflections led to a finalR value of 0.066. There are two different environments for the nickel-containing cations: one is positioned within the hydrophilic layer with the pyridine ligand intercalated into the hydrophobic calixarene bilayer and the other is also positioned within the hydrophilic layer, but the pyridine ligand is inserted into the hydrophobic cavity of the calix[4]arene. [(H₂O)₄Cu(NC₅HS)₂](H₃O)₃[calix[4]arene sulfonate]·10 H₂O,2, crystallizes in the triclinic space groupP \(\bar 1\) witha = 15.438(4),b = 15.727(6),c = 12.121(9) Å, α = 112.74(4), β = 102.02(4), γ = 85.34(4)°, andD _c = 1.57 g cm^?3 forZ = 2. Refinement based on 3925 observed reflections led to a finalR value of 0.107. The structure is similar to that of 1 except that the one copper-containing cation spans the hydrophilic layer and is intercalated into the bilayer of calixarenes on one side and positioned into the calixarene cavity on the other.     

Determination of lead at the ng ml-1 level by reduction to plumbane and measurement by inductively-coupled plasma emission spectrometry

A detection limit of 1 ng ml^-1 for lead is obtained by the reported method. Samples are prepared in 0.5 M hydrochloric acid—0.8 M hydrogen peroxide. Plumbane is produced (with 64% efficiency) by the addition of 5% sodium tetrahydroborate in 0.5% NaOH, and is transported by the argon feed directly to an inductively-coupled argon plasma for emission spectrometry. Decreased hydrogen generation and greater stability of the plasma also contribute to the improved detection limit. The method is shown to be generally applicable to As, Sb, Bi, Sn, Te and Se, with detection limits at the ng ml^-1 level.     

Cyclic acetal-photosensitized polymerization. II. Photopolymerization of styrene in the presence of various monocyclic acetals

The polymerization of styrene (St) in benzene solution in the presence of 1,3-dioxane (DON), 1,3-dioxepane (DOP), trioxane (TRON), or tetraoxane (TEON) by means of photoirradiation of the system at 40°C has been studied kinetically from the standpoint of photosensitized polymerization. The rate of photosensitized polymerization R_p increased in the order: DOP < DON < TRON < TEON, as shown by the rate constant of decomposition of cyclic acetals, and then could be expressed by R_p = k[monocyclic acetal]^0.5[St]^1.0. The polymerization was confirmed to proceed via a radical mechanism.     

Poly(vinyl chloride) matrix membrane electrode for the selective determination of heroin (diamorphine) in illicit powders

The potentiometric response characteristics of a poly(vinyl chloride) membrane electrode for heroin based on its ion-pair complex with tetraphenylborate were examined. The influence of pH, temperature and time on the performance of the electrode system was investigated. The electrode shows a near-Nernstian response over the heroin concentration range 10(-2)-10(-4) M with good precision. The mean relative standard deviation for the determination of heroin in 40 micrograms ml-1(-1) mg ml-1 aqueous heroin hydrochloride solutions is 1.2%. The electrode exhibits good selectivity for heroin in the presence of a number of adulterants and basic organic compounds commonly present in illicit heroin powders. The method was applied to the direct potentiometric determination of heroin in illicit powders (10-36% heroin) and the results agreed fairly well with those obtained by gas - liquid chromatography.     

Practical synthesis of optically active styrene oxides via reductive transformation of 2-chloroacetophenones with chiral rhodium catalysts

[reaction: see text] A practical method for the synthesis of optically active styrene oxides has been developed via formation of optically active 2-chloro-1-phenylethanols generated by reductive transformation of ring-substituted 2-chloroacetophenones. The optically active alcohols with up to 98% ee are obtainable from the asymmetric reduction of acetophenones with an S/C = 1000-5000 with a formic acid triethylamine mixture containing a well-defined chiral Rh complex, CpRhCl[(R,R)-Tsdpen].     

Metal ion incorporation into n-methyl-5,10,15,20-tetrakis (4-sulfonatophenyl) porphine and its differential rates as applied to the kinetic determination of copper(II) and zinc(II) in serum

Metal ion incorporation intoN-methyl-5,10,15,20-tetrakis(4-sulfonatophenyl)porphine (N-CH₃TSPP) has been shown to be much faster than that for non-methylated porphyrins such as 5,10,15,20-tetrakis(4-sulfonatophenyl)porphine (TSPP). We have proposed a kinetic method, utilizing differential rate of metal ion incorporation into N-CH₃TSPP, for the determination of submicrogram amounts of copper(II) and zinc(II) in serum.     

Clinical comparison of 99mTc-diethylenetriaminepentaacetic acid-human serum albumin (99mTc-HSA-D) and 99mTc-human serum albumin (99mTc-HSA) for cardiac blood pool imaging

99mTc-HSA-D has been developed as a new blood pool scanning agent. Clinical comparison of 99mTc-HSA-D and 99mTc-HSA was made in 16 cases. The activity concentration of 99mTc in blood was measured during 2 hours after the injection in five cases. 99mTc-HSA-D showed higher concentration compared to 99mTc-HSA with the passage of time. Quantitative analysis of contrast between left ventricle and septum was performed on end diastolic frames of gated images 10 minutes after the injection. There was no obvious difference between 99mTc-HSA-D and 99mTc-HSA. The subjective comparison of detectability of lesions between the two agents was performed on three directional gated images. 99mTc-HSA-D was superior to 99mTc-HSA, because the images of the latter deteriorated with the passage of time. On anterior view images 1 hour after the injection, left ventricle/lung and abdominal aorta/background count ratios were greater for 99mTc-HSA-D in many cases. There was no obvious difference in liver/background and kidney/background count ratios between the two agents. Urinary excretion of 99mTc was considerably lesser for 99mTc-HSA-D. The results indicated that 99mTc-HSA-D was superior to 99mTc-HSA for cardiac blood pool imaging.