Thermally assisted magnetization reversal in submicron-sized magnetic thin films

We have measured the rate of thermally assisted magnetization reversal of submicron-sized magnetic thin films. For fields H just less than the zero-temperature switching field H(C), the probability of reversal, P(exp)(s)(t), increases for short times t, achieves a maximum value, and then decreases exponentially. Micromagnetic simulations exhibit the same behavior and show that the reversal proceeds through the annihilation of two domain walls that move from opposite sides of the sample. The behavior of P(exp)(s)(t) can be understood through a simple "energy-ladder" model of thermal activation.     

Simultaneous recording of stimulus-frequency and distortion-product otoacoustic emission input-output functions in human ears

Stimulus frequency otoacoustic emission (SFOAE) input-output (I/O) functions were elicited in normal-hearing adults using unequal-frequency primaries in equal-level and fixed-suppressor level (Ls) conditions. Responses were repeatable and similar across a range of primary frequency ratios in the fixed-Ls condition. In comparison to equal-frequency primary conditions [Schairer, Fitzpatrick, and Keefe, J. Acoust. Soc. Am. 114, 944-966 (2003)], the unequal-frequency, fixed-Ls condition appears to be more useful for characterizing SFOAE response growth and relating it to basilar-membrane response growth, and for testing the ability to predict audiometric thresholds. Simultaneously recorded distortion-product OAE (DPOAE) I/O functions had higher thresholds than SFOAE I/O functions, and they identified the onset of the nonlinear-distortion mechanism in SFOAEs. DPOAE threshold often corresponded to nonmonotonicities in SFOAE I/O functions. This suggests that the level-dependent nonmonotonicities and associated phase shifts in SFOAE I/O functions were due to varying degrees of cancellation of two sources of SFOAE, such as coherent reflection and distortion mechanisms. Level-dependent noise was observed on-band (at the frequencies of the stimuli) but not off-band, or in the DPOAEs. The variability was observed in ears with normal hearing and ears with cochlear implants. In general, these results indicate the source of the variability is biological, possibly from within the middle ear.     

Partial Flocks of Quadratic Cones with a Point Vertex in Pg(n,q), n Odd

We generalise the definition and many properties of flocks ofquadratic cones in PG(3,q) to partial flocks of quadratic coneswith vertex a point in PG(p,q), for n 3 odd.     

Sources of distortion product otoacoustic emissions revealed by suppression experiments and inverse fast Fourier transforms in normal ears.

Primary and secondary sources combine to produce the 2f1-f2 distortion product otoacoustic emission (DPOAE) measured in the ear canals of humans. DPOAEs were obtained in nine normal-hearing subjects using a fixed-f2 paradigm in which f1 was varied. The f2 was 2 or 4 kHz, and absolute and relative primary levels were varied. Data were obtained with and without a third tone (f3) placed 15.6 Hz below 2f1-f2. The level of f3 was varied in order to suppress the stimulus frequency otoacoustic emission (SFOAE) coming from the 2f1-f2 place. These data were converted from the complex frequency domain into an equivalent time representation using an inverse fast Fourier transform (IFFT). IFFTs of unsuppressed DPOAE data were characterized by two or more peaks. Relative amplitudes of these peaks depended on overall primary level and on primary-level differences. The suppressor eliminated later peaks, but early peaks remained relatively unaltered. Results are interpreted to mean that the DPOAE measured in humans includes components from the f2 place (intermodulation distortion) and DP place (in the form of a SFOAE). These findings build on previous work by providing evidence that multiple peaks in the IFFT are due to a secondary source at the DP place.     

Effect of alkaline cleaning and activation on aluminum alloy 7075-T6

The effect of alkaline cleaning and activation on the composition and thickness of the oxide layer on aluminum alloy 7075-T6 was studied. E-pH diagrams were developed to predict the effect of alkaline cleaning and activation solutions on the stability of the oxide surface layers. The thickness of the native oxide layer was determined to be ∼30 nm by Auger electron spectroscopy depth profiling analysis. The outer ∼20 nm was rich in magnesium while the remaining ∼10 nm was rich in aluminum. Cleaning in a 9.1 pH alkaline solution was found to remove the magnesium-rich layer and leave behind an aluminum-rich oxide layer ∼10 nm thick. Activation in alkaline solutions of NaOH (pH > 12.9) or Na₂CO₃ (pH > 11.5) produced an oxide that was ∼20 to 60 nm thick and rich in magnesium. Alkaline cleaning and activation altered the oxide composition and thickness making it possible for deposition of thicker cerium-based conversion coatings (∼100 to 250 nm) compared to only alkaline cleaning (∼30 nm), with application of one spray cycle of deposition solution.     

Distortion-product otoacoustic-emission suppression tuning in human infants and adults using absorbed sound power

The greatest difference in distortion product otoacoustic emission (DPOAE) suppression tuning curves (STCs) in infant and adult ears occurs at a stimulus frequency of 6 kHz. These infant and adult STCs are much more similar when constructed using the absorbed power level of the stimulus and suppressor tones rather than using sound pressure level. This procedure incorporates age-related differences in forward and reverse transmission of sound power through the ear canal and middle ear. These results support the theory that the cochlear mechanics underlying DPOAE suppression are substantially mature in full-term infants.     

On the transverse compression response of Kevlar KM2 using fiber-level finite element model

Flexible textile composites like woven Kevlar fabrics are widely used in high velocity impact (HVI) applications. Upon HVI they are subjected to both longitudinal tensile and transverse compressive loads. To understand the role of transverse properties, the single fiber and tow transverse compression response (SFTCR and TTCR) of Kevlar KM2 fibers are numerically analyzed using plane strain finite element (FE) models. A finite strain formulation with a minimum number of 84 finite elements is determined to be required for the fiber cross section to capture the finite strain SFTCR through a mesh convergence study. Comparison of converged numerical solution to the experimental results indicates the dominant role of geometric stiffening at finite strains due to growth in contact width. The TTCR is studied using a fiber length scale FE model of a single tow comprised of 400 fibers transversely loaded between rigid platens. This study along with micrographs of yarn after mechanical compaction illustrates fiber spreading and fiber–fiber contact friction interactions are important deformation mechanisms at finite strains. The TTCR is also studied using homogenized yarn level models with properties from the literature. Comparison of TTCR between fiber length scale and homogenized yarn length scale models indicate the need for a nonlinear material model for homogenized approaches to accurately predict the transverse compression response of the fabrics.     

The analysis of alkyl-capped alcohol ethoxylates and alcohol ethoxycarboxylates from alcohol ethoxylates by atmospheric pressure chemical ionization mass spectrometry

Alcohol ethoxylates (AEs) are nonionic surfactants. They are industrially important compounds that have historically been difficult to analyze, with the best results to date achieved through derivatization (e.g., silylation) followed by analysis by gas chromatography/mass spectrometry (GC/MS). Recently, mass spectrometric techniques such as field desorption (FD), time-of-flight secondary ion mass spectrometry (TOF-SIMS), fast atom bombardment (FAB), electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) have been employed to analyze surfynol(R) 4xx. In an effort to produce low-cost alkyl-capped AEs and anionic detergents from AEs, a fast and reliable measure of the product yields and conversions from AEs is required in research. We found that the product yields and conversions from reactions of AEs, obtained by the employment of atmospheric pressure chemical ionization (APCI), were in good agreement with those obtained from proton nuclear magnetic resonance spectroscopy ((1)H-NMR). Therefore, APCI can be used as a validated tool for studying AE reactions. Mixtures that contain either silylated or unsilylated ethoxylates and/or carboxylates yield the same APCI mass spectra. Copyright -Copyright 1999 John Wiley & Sons, Ltd.     

A survey of spectrogram track detection algorithms

The detection of tracks in spectrograms is an important step in remote sensing applications such as the analysis of marine mammal calls and remote sensing data in underwater environments. Recent advances in technology and the abundance of data requires the development of more sensitive detection methods. This problem has attracted researchers’ interest from a variety of backgrounds ranging between image processing, signal processing, simulated annealing and Bayesian filtering. Most of the literature is concentrated in three areas: image processing, neural networks, and statistical models such as the Hidden Markov model. There has not been a review paper which describes and critically analyses the application of these key algorithms. This paper presents an extensive survey and an algorithm taxonomy, additionally each algorithm is reviewed according to a set of criteria relating to their success in application. These criteria are defined to be their ability to cope with noise variation over time, track association, high variability in track shape, closely separated tracks, multiple tracks, the birth/death of tracks, low signal-to-noise ratios, that they have no a priori assumption of track shape and that they are computationally cheap. Our analysis concludes that none of these algorithms fully meets these criteria.