临床试验(Ⅱ)

在本文的第Ⅰ部份，涉及了临床试验的内涵、研究中的偏性、困难与临床试验设计的进展．第Ⅱ部份主要涉及分析中的一些重要问题，其中包括：５，生存质量的测定；６，病人的依从性； ７， Ｍｅｔａ分析．     

Synthesis and properties of tricyclo[6.4.1.0]trideca-1,3(6),7,9,11-pentaene

A new cyclobutene-fused 1,6-methano[10]annulene was synthesized by pyrolysis of the sulfone and sulfinate adducts of 3,4-bis(methylene)-1,6-methano[10]annulene and its physical and chemical properties were disclosed.     

含k-次增生算子的Ishikawa迭代的收敛性问题

主要研究了非线性方程x Tx=f的Ishikawa迭代解．其中T为k-次增生的或增生的，并在一致光滑和任意的实Banach空间分别研究了上述方程的带误差的Ishikawa迭代解，从而推广了已知的一些结果。     

Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser

The fracture mechanisms of Hg_0.8Cd_0.2Te induced by pulsed TEA-CO₂ laser have been investigated theoretically and experimentally in this paper. The Hg_0.8Cd_0.2Te target was irradiated by a TEA-CO₂ laser with wavelength of 10.6 μm and spike width of 240 ns in an ambient atmosphere. The evident cracks can be found on the surface of the target from the scanning electron microscopy (SEM) photos, indicating that the severe breaks happened during the experiment. Theoretical analysis has also been carried out and the results show that the fracture of Hg_0.8Cd_0.2Te is mainly induced by thermal stresses, although there are three forces (thermal stress, evaporation wave and laser-supported detonation (LSD) wave) exerted on the target surface during the process.     

Q-正则Loewner空间中的拟对称映射

本文在Q-正则Loewner空间中用环模不等式刻划了拟对称映射.另外,在 Q-维Ahlfors-David正则空间中建立了拟对称映射作用下的Grotzsch-Teichmuller型 模不等式,它是通过伸张系数的积分平均来表示.     

非对称核物质中同位旋对称势的动量和密度依赖性

在Brueckner-Hartree-Fock理论框架内, 研究了同位旋非对称核物质中质子和中子单粒子势的动量相关性及其随同位旋非对称度的变化, 在此基础上计算了同位旋对称势, 并讨论了三体核力的影响. 结果表明同位旋对称势对于同位旋非对称度的依赖性很弱, 但对于动量和密度均有较强的依赖性. 当密度固定时, 同位旋对称势随动量增加而减小. 尽管三体核力对于质子和中子单粒子势的动量相关性有较大影响, 但对同位旋对称势的影响很小. 还与目前重离子碰撞输运理论模型中所使用的各种参数化的唯象对称势进行了比较.     

类锂铝复合机制产生X光激光的等离子体状态

本文从速率方程出发,讨论了类锂铝复合等离子体的激发态结构,衰减常数,反转率和小信号增益等表征介质增益特性的物理量以及它们随电子温度,电子密度和光子逃逸几率的变化。找到了进行类锂铝离子通过复合机制产生X光激光设计应创造的等离子体状态目标区域。还讨论了这些物理量随原子序数变化的定标律。     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.