Five- and Six-Coordinate 2-Methyl-2-propanethiolato Complexes of Zirconium(IV): Synthesis and Structures of [Li(DME)(3)][Zr(SCMe(3))(5)] and [(THF)Li](2)Zr(SCMe(3))(6)

Five-coordinate and six-coordinate 2-methyl-2-propanethiolato complexes of zirconium, [Li(DME)(3)][Zr(SCMe(3))(5)] (1) and [(THF)Li](2)Zr(SCMe(3))(6) (2), were obtained from the ZrCl(4)/LiSCMe(3) reaction system. The control of the Zr coordination number, by the ether ligands, THF or DME, bound to Li, is demonstrated by the conversion of 2 into 1 upon dissolution in DME. 1 and 2 were crystallographically characterized. The structures are extensively disordered. Crystal data follow: 1, hexagonal P6(3)/m, a = b = 12.496(3) ?, c = 17.561(9) ?, Z = 2, V = 2375(1) ?(3), R = 5.0%, R(w) = 6.8%; 2, trigonal R32, a = b = 11.813(3) ?, c = 28.37(1) ?, Z = 3, V = 3428(1) ?(3), R = 5.2%, R(w) = 6.4%.     

Study on radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. I. Radiation-induced polymerization of styrene adsorbed on several inorganic substances

The radiation-induced polymerization of styrene adsorbed on silica gel, white carbon, silicic acid anhydride, zeolite, and activated alumina was carried out to elucidate the effect of properties of inorganic substances on the polymerization. The rate of adsorbed state polymerization on these inorganic substances was very fast in comparison with that of bulk-state polymerization. The amount of unextractable polymer depends on the specific surface area and chemical compositions of these inorganic substances. Inorganic substances which contain aluminum as a component element are more likely to be grafted than those which consist of SiO₂ alone. The molecular weight and molecular weight distribution of unextractable polymer and extractable polymer differ from one another in each inorganic substance. In case of silicic acid anhydride, unextractable polymer has smaller molecular weight than extractable polymer. These results suggest that unextractable polymer cannot be extracted due to chemical bonds with the inorganic surface.     

Preparation of Silicalite-1 Within Macroporous Silica Glass

Microcrystalline silicalite-1 was formed on the inner surface of macroporus silica glasses prepared by the sol-gel process. By heating a homogeneous precursor solution at 100°C under a hydrothermal condition, 2–5 m of plate-like particles of silicalite-1 were deposited. With an increase of mixing time of the precursor solution, the number of silicalite-1 particles increased, accompanied by the relative decrease of the particle size. Depending on the temperature and the duration of the heat-treatment of the macroporous silica, the amount of deposited silicalite-1 varied. Below 1000°C, the amount increased with the heat-treatment temperature, as a result of the competition between the precipitation of silicalite-1 and the dissolution of silica from the macroporous silica glass under a strongly basic condition. On the other hand, above 1000°C the amount of deposited silicalite-1 decreased in accordance with the decrease of the macropore diameter by the heat-treatment, because of the limited transport of the dissolved silicate species through the smaller macropores.     

Low temperature synthesis and characterization of porous anatase TiO2 nanoparticles

An ethanol solution of Ti-peroxy compounds was prepared from the ethanol solution of titanium isopropoxide (Ti(O-iPr)4) and H2O2. Heating of the ethanol solution of the Ti-peroxy compounds at 348 K formed a Ti-peroxy gel, and heat treatment of the gel at 348 K for more than 6 h formed gels that consisted of anatase nanoparticles. The diameter of the anatase nanoparticles increased from 9 to 15 nm as the heating time increased from 6 to 48 h. According to the results of the N2 adsorption measurement, the anatase nanoparticles had micropores, and the specific surface area (SBET) was in the range of 254 to 438 m2/g. The particle size, lattice strain, specific surface area, and photocatalytic activity of the anatase nanoparticles can be regulated by the heating time of the Ti-peroxy gel at 348 K.     

Synthesis, structure and thermal stability of fully hydrophobic porphyrin-DNA conjugates

The DNAs modified with tetraphenyl porphyrin at the center of 13mer oligonucleotide were synthesized using phosphoramidite chemistry and automated DNA synthesis. When the porphyrin modified oligonucleotide was annealed with its complementary strand, they formed a standard B-form duplex. The porphyrin moiety intercalated in the duplex, and moderately lowered the thermal stability.     

Novel syntheses of enantiopure hexahydroimidazo[1,5-b]isoquinolines and tetrahydroimidazo[1,5-b]isoquinolin-1(5H)-ones via iminium cation cyclizations

Condensations of chiral diamines 11a-c with benzotriazole and formaldehyde gave benzotriazolyl intermediates 12a-c; similar condensations of alpha-amino-amides 10a-c with benzotriazole and paraformaldehyde gave 14a-c. Subsequent treatment of 12a-c and 14a-c with AlCl(3) led to enantiopure tricyclic 1,2,3,5,10,10a-hexahydroimidazo[1,5-b]isoquinolines 1a-c and 2,3,10,10a-tetrahydroimidazo[1,5-b]isoquinolin-1(5H)-ones 15a-c, respectively, via Lewis acid promoted iminium cation cyclizations.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VIII. Polymerization of styrene and methyl methacrylate adsorbed on aerosil

Aerosil is silica having a purity which is very high compared with that of silica gel and having, unlike silica gel, no micropores. To investigate the effects of impurities and micropores on the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on silica gel, the radiation-induced polymerization of styrene and methyl methacrylate adsorbed on Aerosil was carried out. The results of both the styrene–Aerosil 300 system and the methyl methacrylate–Aerosil 300 system were similar to those of the styrene–silica gel and methyl methacrylate–silica gel systems, respectively. This suggests that in the radiation-induced polymerization of both styrene–silica gel and methyl methacrylate–silica gel systems the impurity and the presence of micropores have almost no effects on the reaction mechanism. The effect of aluminum as an impurity was investigated on the styrene–Aerosil MOX 170 system. It was found that aluminum accelerated the cationic polymerization.     

Electronic structures of zinc and palladium tetraazaporphyrin derivatives controlled by fused benzo rings

Zinc and palladium tetracyclic aromatic complexes lying structurally between tetraazaporphyrin (TAP) and phthalocyanine (Pc), that is, monobenzo-, adjacently dibenzo-, oppositely dibenzo-, and tribenzo-fused TAPs, have been prepared, and their electronic structures investigated by electronic absorption, magnetic circular dichroism (MCD), fluorescence, phosphorescence, and time-resolved electron paramagnetic resonance (TREPR) spectroscopy, as well as cyclic voltammetry. The last-named indicated that the first oxidation potentials shift to more negative values with increasing number of the fused benzo rings, but also suggested that the first reduction potential apparently has no correlation with the size and symmetry of the pi-conjugated systems. However, this latter behavior is reasonably interpreted by the finding that the effect of the fused benzo rings on destabilization of the LUMO depends on the orbital to which they are fused (i.e., whether it is an egx or egy orbital), since the LUMOs of TAP complexes are degenerate with D4h symmetry. The energy splitting of the LUMOs, that is, DeltaLUMO, was evaluated experimentally for the first time by analyzing the relationship between the first reduction potential and the size and shape of the pi-conjugated system. Electronic absorption and MCD measurements indicate that the lowest excited singlet states are split in the case of the low-symmetry TAP derivatives, although these excited states are degenerate for Pc and TAP with D4h symmetry. These energy splittings DeltaE(SS) correlate well with the DeltaLUMO values. To investigate the electronic structures in the lowest excited triplet state, zero-field splitting (zfs) was analyzed by time-resolved EPR (TREPR) spectroscopy. The energy splitting in the lowest excited triplet state, DeltaE(TT) was quantitatively evaluated from the temperature dependence of the zfs or spin-orbit coupling of the Pd complexes. Consequently, it is demonstrated that DeltaLUMO, DeltaE(SS), and DeltaE(TT) values exhibiting a mutually good relationship can be determined experimentally.     

Structural effects on surface and micellar properties of alkanediyl-alpha, omega-bis(sodium N-acyl-beta-alaninate) gemini surfactants

A study of the equilibrium surface properties (in water and in the presence of 0.01 M NaCl) of a novel series of anionic gemini surfactants, alkanediyl-alpha,omega-bis(sodium N-acyl-beta-alaninates), is described. Parameters studied include cmc (critical micelle concentration), C20 (required to reduce the surface tension of the solvent by 20 mN/m), gamma(cmc) (the surface tension at the cmc), Gamma(max) (the maximum surface excess concentration at the air/aqueous solution interface), Amin (the minimum area per surfactant molecule at the air/water interface), and the cmc/C20 ratio (a measure of the tendency to form micelles relative to adsorb at the air/water interface). The geminis with a spacer consisting of two methylene groups show premicellar self-aggregation, both in water and in 0.01 M NaCl, when the N-acyl group contains more than 12 carbon atoms; geminis with a spacer consisting of four methylene groups show no premicellar aggregation even when the N-acyl group contains 16 carbon atoms. For the acyl chain lengths where premicellar aggregation does not occur, the values of the cmc of the geminis with a two-methylene spacer are lower than those for the corresponding analogous geminis with a four-methylene spacer. The premicellar formation for the geminis with a two-methylene spacer is due to the short-chain linkage. The geminis show little or no break in their specific conductance-surfactant molar concentration plots and an increase in the pH at the cmc. This is attributed to protonation of the carboxylate group and strong Na+ release during micellization.     

Spectroscopy, electrochemistry, and molecular orbital calculations of metal-free tetraazaporphyrin, -chlorin, -bacteriochlorin, and -isobacteriochlorin

Metal-free tetraazachlorin (TAC), -bacteriochlorin (TAB), and -isobacteriochlorin (TAiB) were characterized by electronic absorption, magnetic circular dichroism (MCD), fluorescence, and time-resolved ESR (TR-ESR) spectroscopy, and by cyclic voltammetry. The results are compared with those of metal-free tetraazaporphyrin (TAP). The potential difference DeltaE between the first oxidation and reduction couples decreases in the order TAP>TAiB>TAC>TAB. The splitting of both the Q and Soret bands decreases in the order TAB>TAC>TAP>TAiB. Corresponding to the split absorption bands, MCD spectra show a minus-to-plus pattern with increasing energy in both the Q and Soret regions, which suggests that the energy difference between the HOMO and second HOMO is larger than that between the LUMO and second LUMO. These spectroscopic properties and redox potentials were reproduced by molecular orbital calculations using the ZINDO/S Hamiltonian. The fluorescence quantum yields of the reduced species are much smaller than that of TAP. The zero-field splitting (ZFS) parameters D and E of the excited triplet states (T1) of these species decrease and increase, respectively, on going from TAP to TAC and further to TAB. The D and E values of TAiB are larger than those of the other species. The results are supported by the absence of interaction between the spin over reduced pyrrole moieties of the HOMO and over the LUMO, and by calculations of ZFS under a half-point-charge approximation.