Solvent effect on protein binding by polymer brush grafted onto porous membranes

An epoxy-group-containing polymer chain was grafted onto the hollow-fiber form of a porous polyethylene membrane by the immersion of the electron beam-irradiated trunk polymer in glycidyl methacrylate diluted with methanol and 1-butanol. The epoxy group density ranged from 8.5 to 13.4 mol per kg of the trunk polymer. Subsequently, the epoxy groups produced were converted into sulfonic acid and diethylamino groups. The density of -SOH and -N(C2H5), groups was 0.40 and 2.2 mol per kg of the product. respectively. The polymer brush, defined as a polymer chain extending from the surface of a pore toward the interior of the pore, was evaluated from the determination of an equilibrium binding capacity of hen egg lysozyme (HEL) and bovine serum albumin (BSA). The polymer brush prepared in 1-butanol was found to be longer than that prepared in methanol from the determinations of liquid permeability and protein adsorptivity. The proteins were bound to the polymer brush prepared in 1-butanol, followed by the functionalization, at higher degrees of multilayer binding: about 30 for HEL and 6 for BSA.     

Cloning and characterization of an active fragment of luciferase from a luminescent marine alga, Pyrocystis lunula

Two marine dinoflagellates, Lingulodinium polyedrum and Pyrocystis lunula, emit light in a reaction involving the enzymatic oxidation of its tetrapyrrole luciferin by molecular oxygen. The characteristic properties of P. lunula luciferase have not been clarified, whereas L. polyedrum luciferase, which has three active domains, has been characterized. A cloned partial cDNA of the P. lunula luciferase encodes an active fragment corresponding to part of domain 2 and all of domain 3 of L. polyedrum luciferase. The homology of the amino acid sequence between the two luciferases in domain 3 is about 84.3%. A recombinant His-tagged luciferase fragment containing domain 3 (Mr = 46 kDa) catalyzed the light-emitting oxidation of luciferin (lambdamax = 474 nm). This protein was purified by a single affinity-chromatography procedure. The pH-activity profile and the bioluminescence spectrum of the recombinant enzyme having a third domain are almost identical to those of an extract from P. lunula cultured in vitro. The recombinant enzyme is active at pH 8.0, although the recombinant enzyme derived from the second domain of L. polyedrum luciferase is inactive at pH 8.0. Substitution of Glu-201 by histidine in the third domain of P. lunula luciferase showed a decrease of activity above pH 7.0, suggesting that histidine residues could be responsible for pH-sensitivity in dinoflagellate luciferase.     

Rotational correlation times of adenosine 5′-monophosphate in solution as deduced from 1H and 13C spin-lattice relaxation times

Rotational correlation times (τ_T) of the 5′-AMP molecule deduced from spin-lattice relaxation times (T₁) of different protons in the molecule agree fairly well with each other in the temperature range of 3.5–74°C. The same is true with τ_T values deduced from ¹³CT₁ values. These results indicate that the internal motions are slow as compared to the overall rotation of the 5′-AMP molecule.     

Three-dimensional imaging of YB56 by high-resolution electron microscopy

The three-dimensional potential map of YB56 was obtained by inverse Fourier transformation of three-dimensional phases and amplitudes in three high-resolution images taken along the [100], [110] and [111] directions of YB56 crystals; the size of the imaging region was 14 nm x 14 nm x approximately 4 nm, and the image directly showed the three-dimensional potential map of the crystal, a useful method for three-dimensional structure analysis in nanoscale regions.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Local structure and chemical durability of FeOOH-fixed sodium silicate glass prepared from water glass

A 12M HCl solution of iron oxyhydroxide (a-FeOOH: goethite) was mixed with water glass (18Na₂O^.36SiO₂ ^.46H₂O) at room temperature. The mixture (sol) changed into a dry gel when dried at 25 °C for 120 hours in air. Glass-ceramic and glass samples were prepared when the dry gel was heated for 1-3 hours in an electric furnace at 800 and 900 °C, respectively. The ⁵⁷Fe Mössbauer spectrum of the dry gel is composed of a magnetic hyperfine structure owing to the formation of g-FeOOH (lepidocrocite). By contrast, the ⁵⁷Fe Mössbauer spectrum of glass-ceramic and glasses is composed of paramagnetic Fe(III) with distorted tetrahedral symmetry. This proves that Fe(III) atoms occupy network-forming Si(IV) sites in the FeOOH-fixed sodium silicate glass. A leaching test of the silicate glass in the acid rain simulant composed of HNO₃ (pH 3.5) and H₂SO₄ (pH 3.5) revealed high chemical durability, indicating that Fe(III) is firmly fixed in the glass matrix.     

Synthesis and structural characterization of silanethiolato complexes having tert-butyldimethylsilyl and trimethylsilyl groups

Treatment of cyclotrisilathiane (Me2SiS)3 with 3 equiv. of RLi (R = Me, But) in hexane-Et2O afforded the lithium silanethiolates LiSSiMe2R, and the tmeda adduct [(tmeda)LiSSiMe2But]2 1 (tmeda =N,N,N',N'-tetramethylethylenediamine) was isolated in the case of R = But. Reaction of Fe(CH3CN)2(CF3SO3)2, CoCl2, and [Cu(CH3CN)4](PF6) with 1 gave rise to the silanethiolato complexes M(SSiMe2But)2(tmeda)(M = Fe 2, Co 3), and [Cu(SSiMe2But)]4 4, respectively. Complexes (C5H5)2Ti(SSiMe2R)2(R = Me 5, But 6) and Ni(SSiMe2R)2(dppe)[R = Me 7, But 8; dppe = 1,2-bis(diphenylphosphino)ethane] were prepared from treatments of (C5H5)2TiCl2 and NiCl2(dppe) with the corresponding lithium silanethiolates. Complex 7 readily reacted with (C5H5)TiCl3 to produce the Ti-Ni heterobimetallic compound (C5H5)TiCl(mu-S)2Ni(dppe) 9, in which silicon-sulfur bond cleavage took place. Characterization of all compounds through spectroscopic techniques and elemental analyses are also described. X-Ray structural data for compounds 1 and 3-9 are reported.     

NMR and quantum chemical study on the OH...pi and CH...O interactions between trehalose and unsaturated fatty acids: implication for the mechanism of antioxidant function of trehalose

Trehalose is a disaccharide that attracts much attention as a stress protectant. In this study, we investigated the mechanism of the antioxidant function of trehalose. The spin-lattice relaxation times (T(1)) of (1)H and (13)C NMR spectra were measured to investigate the interaction between trehalose and unsaturated fatty acid (UFA). We selected several kinds of UFA that differ in the number of double bonds and in their configurations (cis or trans). Several other disaccharides (sucrose, maltose, neotrehalose, maltitol, and sorbitol) were also analyzed by NMR. The T(1) values for the (1)H and (13)C signals assigned to the olefin double bonds in UFA decrease with increasing concentration of trehalose and the changes reaches plateaus at integer ratios of trehalose to UFA. The characteristic T(1) change is observed only for the combination of trehalose and UFA with cis double bond(s). On the other hand, from the (13)C-T(1) measurements for trehalose, the T(1) values of the C-3 (C-3') and C-6' (C-6) are found to change remarkably by addition of UFA. (1)H[bond](1)H NOESY measurements provide direct evidence for complexation of trehalose with linoleic acid. These results indicate that one trehalose molecule stoichiometrically interacts with one cis-olefin double bond of UFA. Computer modeling study indicates that trehalose forms a stable complex with an olefin double bond through OH...pi and CH...O types of hydrogen bonding. Furthermore, a significant increase in the activation energy is found for hydrogen abstraction reaction from the methylene group located between the double bonds that are both interacting with the trehalose molecules. Therefore, trehalose has a significant depression effect on the oxidation of UFA through the weak interaction with the double bond(s). This is the first study to elucidate the antioxidant function of trehalose.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.