Solvent effect on protein binding by polymer brush grafted onto porous membranes

An epoxy-group-containing polymer chain was grafted onto the hollow-fiber form of a porous polyethylene membrane by the immersion of the electron beam-irradiated trunk polymer in glycidyl methacrylate diluted with methanol and 1-butanol. The epoxy group density ranged from 8.5 to 13.4 mol per kg of the trunk polymer. Subsequently, the epoxy groups produced were converted into sulfonic acid and diethylamino groups. The density of -SOH and -N(C2H5), groups was 0.40 and 2.2 mol per kg of the product. respectively. The polymer brush, defined as a polymer chain extending from the surface of a pore toward the interior of the pore, was evaluated from the determination of an equilibrium binding capacity of hen egg lysozyme (HEL) and bovine serum albumin (BSA). The polymer brush prepared in 1-butanol was found to be longer than that prepared in methanol from the determinations of liquid permeability and protein adsorptivity. The proteins were bound to the polymer brush prepared in 1-butanol, followed by the functionalization, at higher degrees of multilayer binding: about 30 for HEL and 6 for BSA.     

Synthesis of Ultrafine SiC Powders from Carbon-Silica Hybridized Precursors with Carbothermic Reduction

Inorganic-organic hybrid gels were prepared by simultaneous condensation of the liquid mixture of ethyl silicate, ethyl borate and water soluble phenol resin with low molecular weight. The liquid mixtures were changed into lightly colored transparent gels after a catalyst addition and stirring. The obtained gels were crushed, dried and fired in controlled conditions to yield the inorganic precursors. Since the tailored inorganic precursors mainly consisted of SiO2 and carbon, silicon carbide was formed with the heat treatments in an Ar atmosphere beyond 1773 K with carbothermic reduction. The properties and morphology of the formed silicon carbide powders in terms of the starting precursor compositions and the conditions of the carbothermic reduction were investigated with SEM, XRD and TG-DTA analysis.     

Preparation and properties of a mitomycin C-albumin conjugate

Mitomycin C, an anti-neoplastic agent, was covalently attached to bovine serum albumin through various kinds of spacers such as glutaryl, succinyl, trans-aconityl, methylsuccinyl and the trimellityl group. The prior acylation of albumin not only prevented protein polymerization in the presence of carbodiimide, but also increased the extent of conjugation of the drug. The conjugate of mitomycin C-glutarylated albumin showed the best properties among the conjugates prepared in meeting the requirements for a high yield of nonpolymerized product with an adequately high mitomycin C content and stability as a macromolecular prodrug.     

Rotational correlation times of adenosine 5′-monophosphate in solution as deduced from 1H and 13C spin-lattice relaxation times

Rotational correlation times (τ_T) of the 5′-AMP molecule deduced from spin-lattice relaxation times (T₁) of different protons in the molecule agree fairly well with each other in the temperature range of 3.5–74°C. The same is true with τ_T values deduced from ¹³CT₁ values. These results indicate that the internal motions are slow as compared to the overall rotation of the 5′-AMP molecule.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Biomimetic reactions of germacrenes

The biomimetic reactions of epoxygermacrene-D ($\text{1}$) with basic alumina afforded three new interesting compounds ($\text{4}$, $\text{5}$, and $\text{6}$), two of which ($\text{4}$ and $\text{6}$) have the same carbon skeleton as that of periplanone-A ($\text{3}$), a sexual stimulant for the American cockroach. The remaining one ($\text{5}$) is a bicyclo[3.1.0]hexane derivative, from whch an axisonitrile-3 type compound ($\text{14}$) has been produced. Finally, preisocalamendiol ($\text{2}$) was also converted into $\text{6}$.     

Synthesis and structural characterization of silanethiolato complexes having tert-butyldimethylsilyl and trimethylsilyl groups

Treatment of cyclotrisilathiane (Me2SiS)3 with 3 equiv. of RLi (R = Me, But) in hexane-Et2O afforded the lithium silanethiolates LiSSiMe2R, and the tmeda adduct [(tmeda)LiSSiMe2But]2 1 (tmeda =N,N,N',N'-tetramethylethylenediamine) was isolated in the case of R = But. Reaction of Fe(CH3CN)2(CF3SO3)2, CoCl2, and [Cu(CH3CN)4](PF6) with 1 gave rise to the silanethiolato complexes M(SSiMe2But)2(tmeda)(M = Fe 2, Co 3), and [Cu(SSiMe2But)]4 4, respectively. Complexes (C5H5)2Ti(SSiMe2R)2(R = Me 5, But 6) and Ni(SSiMe2R)2(dppe)[R = Me 7, But 8; dppe = 1,2-bis(diphenylphosphino)ethane] were prepared from treatments of (C5H5)2TiCl2 and NiCl2(dppe) with the corresponding lithium silanethiolates. Complex 7 readily reacted with (C5H5)TiCl3 to produce the Ti-Ni heterobimetallic compound (C5H5)TiCl(mu-S)2Ni(dppe) 9, in which silicon-sulfur bond cleavage took place. Characterization of all compounds through spectroscopic techniques and elemental analyses are also described. X-Ray structural data for compounds 1 and 3-9 are reported.     

Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

NMR and quantum chemical study on the OH...pi and CH...O interactions between trehalose and unsaturated fatty acids: implication for the mechanism of antioxidant function of trehalose

Trehalose is a disaccharide that attracts much attention as a stress protectant. In this study, we investigated the mechanism of the antioxidant function of trehalose. The spin-lattice relaxation times (T(1)) of (1)H and (13)C NMR spectra were measured to investigate the interaction between trehalose and unsaturated fatty acid (UFA). We selected several kinds of UFA that differ in the number of double bonds and in their configurations (cis or trans). Several other disaccharides (sucrose, maltose, neotrehalose, maltitol, and sorbitol) were also analyzed by NMR. The T(1) values for the (1)H and (13)C signals assigned to the olefin double bonds in UFA decrease with increasing concentration of trehalose and the changes reaches plateaus at integer ratios of trehalose to UFA. The characteristic T(1) change is observed only for the combination of trehalose and UFA with cis double bond(s). On the other hand, from the (13)C-T(1) measurements for trehalose, the T(1) values of the C-3 (C-3') and C-6' (C-6) are found to change remarkably by addition of UFA. (1)H[bond](1)H NOESY measurements provide direct evidence for complexation of trehalose with linoleic acid. These results indicate that one trehalose molecule stoichiometrically interacts with one cis-olefin double bond of UFA. Computer modeling study indicates that trehalose forms a stable complex with an olefin double bond through OH...pi and CH...O types of hydrogen bonding. Furthermore, a significant increase in the activation energy is found for hydrogen abstraction reaction from the methylene group located between the double bonds that are both interacting with the trehalose molecules. Therefore, trehalose has a significant depression effect on the oxidation of UFA through the weak interaction with the double bond(s). This is the first study to elucidate the antioxidant function of trehalose.