Direct Transformation of Molecular Dinitrogen into Ammonia Catalyzed by Cobalt Dinitrogen Complexes Bearing Anionic PNP Pincer Ligands

The direct formation of ammonia from molecular dinitrogen under mild reaction conditions was achieved by using new cobalt dinitrogen complexes bearing an anionic PNP‐type pincer ligand. Up to 15.9 equivalents of ammonia were produced based on the amount of catalyst together with 1.0 equivalent of hydrazine (17.9 equiv of fixed nitrogen atoms).     

Determination and purification of sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography

In Asian countries, sesame seed oil unsaponified matter is used as a natural food additive due to its associated antioxidant effects. We determined and purified the primary lignans sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography. Calibration curves showed good correlation coefficients (r² > 0.999, range 0.08 and/or 0.15 to 5 μg/mL) with a limit of detection (at 290 nm) of 0.02 μg/mL for sesamin and 0.04 μg/mL for sesamolin. Sesame seed oil unsaponified matter contained 2.82% sesamin and 2.54% sesamolin, respectively. Direct qualitative analysis of sesamin and sesamolin was achieved using quadrupole mass spectrometry with positive‐mode electrospray ionization. Pure (>99%) sesamin and sesamolin standards were obtained using high‐speed countercurrent chromatographic purification (hexane/ethyl acetate/methanol/water; 7:3:7:3). An effective method for determining and purifying sesamin and sesamolin from sesame seed oil unsaponified matter was developed by combining these separation techniques for standardized food additives.     

The chemical behavior of silica in water in saline area; comparison for region and evaporation process

The chemical behavior of silica in the water samples from Death Valley were examined by the speciation of silica and the measurements of the silica and alkaline and alkaline earth cation contents to compare with those from the arid area in Xinjiang, Northwest China. Basically, the chemical behavior of silica in spring water samples from Death Valley coherent with those in Xinjiang, Northwest China. And the observed chemical species of silica with alkaline and alkaline earth cations in spring water samples in Death Valley were in good agreement with those in Xinjiang, Northwest China. However, some of the silica behavior observed in water samples in Death Valley was distinct from those observed in Xinjiang, Northwest China. It is considered that some of the water samples in Death Valley were subject to evaporation process.     

Photoisomerization and thermal isomerization of arylazoimidazoles

Photoisomerization and thermal isomerization behaviors of an extensive series of arylazoimidazoles are investigated. Absorption spectra are characterized by a structured pipi* absorption band around 330-400 nm with a tail on the lower energy side extending to 500 nm corresponding to an npi* transition. The trans-to-cis photoisomerization occurs on excitation into these absorption bands. The quantum yields are dependent on the excitation wavelength, as observed for azobenzene derivatives, but are generally larger than those of azobenzene. The thermal cis-to-trans isomerization rates are also generally larger than that of azobenzene and are comparable to those of 4-N,N-dimethylaminoazobenzene and 4-nitroazobenzene. Arylazoimidazoles with no substituent on the imidazole nitrogen are unique in that the quantum yield for the trans-to-cis photoisomerization and the rate of thermal cis-to-trans isomerization are particularly large. It is proposed that the fast thermal isomerization is due to an involvement of self-catalyzed and protic molecule-assisted tautomerization to a hydrazone form.     

Water-soluble self-assembled butadiyne-bridged bisporphyrin: a potential two-photon-absorbing photosensitizer for photodynamic therapy

We have synthesized a novel, two-photon-absorbing photosensitizer for two-photon-absorption photodynamic therapy (2PA-PDT). The molecule is a butadiyne-bridged porphyrin dimer terminated with two water-soluble porphyrin monomers connected through Zn-imidazolyl self-assembly and covalently linked through olefin metathesis. It has an effective two-photon-absorption (2PA) cross-section value, sigma((2)), of 33 000+/-4600 GM with 5-ns pulses at 890 nm measured by using the open-aperture Z-scan technique. The compound was found to generate singlet oxygen, cytotoxic for tumor cells in photodynamic therapy (PDT), under 2PA conditions by conducting photobleaching experiments with anthracene-9,10-dipropionic acid sodium salt (ADPA).     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.     

Preparation and properties of rotaxanes formed by dimethyl-beta-cyclodextrin and oligo(thiophene)s with beta-cyclodextrin stoppers

Novel cyclodextrin rotaxanes with oligothiophene as an axis molecule have been prepared by the Suzuki coupling reaction of 6-O-(4-iodophenyl)-beta-CD (6-I-Ph-beta-CD) with di(1,3,2-dioxaborolan-2-yl)-oligothiophene (oligothiophene diboric ethylene glycol esters) in aqueous solutions of dimethyl-beta-cyclodextrin (DM-beta-CD). These reactions gave [2]rotaxanes and [3]rotaxanes, which were isolated by reversed phase chromatography. The fluorescence intensities of rotaxanes are higher than those of dumbbell-shaped molecules (without DM-beta-CD) in aqueous solutions. The inclusion ratio and chain length of rotaxanes have been found to relate to the emission properties and emission intensities of oligothiophene. In aqueous solutions, fluorescence quantum yields of rotaxanes are higher than those of dumbbell-shaped molecules. The increase in the fluorescence efficiency of rotaxane is caused by suppression of intermolecular interactions, indicating the effect of insulated oligothiophene with DM-beta-CD. beta-CD at the both ends of rotaxanes functions not only as bulky stoppers but also as the recognition site for guest molecules, as verified by fluorescence quenching experiments.     

Noncontact atomic force microscopy of perfect single crystals of pentacene prepared by crystallization from solution

Nearly perfect single crystals of pentacene were grown from trichlorobenzene solution. The surface structure of pentacene single crystals has been investigated by frequency modulation atomic force microscopy. Molecularly flat and extraordinarily wide terraces, extended over the width of more than a few micrometers with monomolecular steps, were consistently observed, suggesting that those pentacene crystals were nearly perfect single crystals. Molecular packing arrangements were revealed by FM-AFM for the first time.     

Adsorption kinetics of carcinogens to DNA liquid crystalline gel beads

Adsorption behaviors of acridine orange (AO) and biphenyl (BP) to DNA liquid crystalline gel (LCG) beads in aqueous dispersing solution have been studied theoretically and experimentally. A theoretical consideration based on nonequilibrium thermodynamics predicted that the time course of the adsorption process is expressed with a scaled equation, and a scaled number of adsorbed carcinogen molecules ? is expressed with the square root of a scaled immersion time t, ? proportional, variant square root t at early stage, whereas it is expressed with a power law function 1 - ? proportional, variant (te - t)3/2 for ?0 > 1 and an exponential equation ?0 - ? proportional, variant e-t/alpha tau0 for ?0 > 1 at later stages of adsorption. Here, ?0 is the ratio of the initial number of carcinogen molecules in the dispersing solution to the number of the sites of adsorption of carcinogen molecules in the beads, te is the scaled equilibrium time of adsorption, tau0 is a time constant for adsorption, and alpha is a constant. Observed adsorption processes for AO were well expressed by the predicted ones, and the fitting parameters ?0 and tau0 increased with increasing cobalt chloride concentration CCo used for preparation of the beads, and both saturated above CCo > or = 400 mM for the adsorption of AO, whereas the adsorption processes for BP were expressed with the square root function. These results indicate that (1) the adsorption process at early stage is explained by diffusion-limited binding of the carcinogen molecules to DNA beads, and the time range of the early stage depends on the solubility (the solubility of AO in water is high whereas that of BP is low); and (2) the process at later stages depends on the balance of the numbers of adsorption sites and carcinogen molecules.