Mechanism for enhancing dispersion of Co3O4 nanoparticles in Co/SiO2 Fischer–Tropsch synthesis catalyst by adding glycol to impregnating solution: a quick‐XAFS study

In situ Co K‐edge quick‐EXAFS (QEXAFS) coupled with temperature‐programmed oxidation as well as ex situ XAFS was applied to investigating the mechanism for enhancing the dispersion of Co₃O₄ nanoparticles in a calcined Co/SiO₂ Fischer–Tropsch synthesis catalyst prepared by adding triethylene glycol (TEG) to a Co(NO₃)₂.6H₂O impregnating solution. Ex situ Co K‐edge XAFS indicated that, regardless of whether the catalysts were prepared with or without using TEG, the hexaaqua Co (II) complex was formed in impregnated samples which then underwent the dehydration process to some extent during the subsequent drying step at 393 K. In situ QEXAFS and ex situ EXAFS results also indicated that small oxide clusters were formed in the TEG‐modified catalyst calcined at ～400–470 K which interacted with polymer species derived from TEG. Since the Fischer–Tropsch synthesis activity of the TEG‐modified catalyst increased with an increase in the calcination temperature in a similar temperature range [Koizumi et al. (2011), Appl. Catal. A, 395 , 138–145], it was suggested that such an interaction enables the clusters to be distributed over the support surface uniformly, resulting in enhancing their dispersion. After combustion of polymer species, Co₃O₄‐like species were formed, and agglomeration of the Co₃O₄‐like species at high calcination temperatures was suppressed by the addition of TEG to the impregnating solution. It was speculated that the addition of TEG induced the formation of some surface silicate which worked as an anchoring site for Co₃O₄ and Co⁰ nanoparticles during calcination and H₂ reduction, respectively.     

Local Uniformization and Free Boundary Regularity of Minimal Singular Surfaces

We continue the study of minimal singular surfaces obtained by a minimization of a weighted energy functional in the spirit of J. Douglas’s approach to the Plateau problem. Modeling soap films spanning wire frames, a singular surface is the union of three disk-type surfaces meeting along a curve which we call the free boundary. We obtain an a priori regularity result concerning the real analyticity of the free boundary curve. Using the free boundary regularity of the harmonic map, we construct local harmonic isothermal coordinates for the minimal singular surface in a neighborhood of a point on the free boundary. Applications of the local uniformization are discussed in relation to H. Lewy’s real analytic extension of minimal surfaces.     

Chosen ciphertext secure keyed-homomorphic public-key cryptosystems

In homomorphic encryption schemes, anyone can perform homomorphic operations, and therefore, it is difficult to manage when, where and by whom they are performed. In addition, the property that anyone can “freely” perform the operation inevitably means that ciphertexts are malleable, and it is well-known that adaptive chosen ciphertext (CCA) security and the homomorphic property can never be achieved simultaneously. In this paper, we show that CCA security and the homomorphic property can be simultaneously handled in situations that the user(s) who can perform homomorphic operations on encrypted data should be controlled/limited, and propose a new concept of homomorphic public-key encryption, which we call keyed-homomorphic public-key encryption (KH-PKE). By introducing a secret key for homomorphic operations, we can control who is allowed to perform the homomorphic operation. To construct KH-PKE schemes, we introduce a new concept, transitional universal property, and present a practical KH-PKE scheme with multiplicative homomorphic operations from the decisional Diffie-Hellman (DDH) assumption. For \(\ell \)-bit security, our DDH-based KH-PKE scheme yields only \(\ell \)-bit longer ciphertext size than that of the Cramer–Shoup PKE scheme. Finally, we consider an identity-based analogue of KH-PKE, called keyed-homomorphic identity-based encryption and give its concrete construction from the Gentry IBE scheme.     

An Outer Approximation Algorithm Guaranteeing Feasibility of Solutions and Approximate Accuracy of Optimality

We treat a concave programming problem with a compact convex feasible set. Assuming the differentiability of the convex functions which define the feasible set, we propose two solution methods. Those methods utilize the convexity of the feasible set and the property of the normal cone to the feasible set at each point over the boundary. Based on the proposed two methods, we propose a solution algorithm. This algorithm takes advantages over classical methods: (1) the obtained approximate solution is always feasible, (2) the error of such approximate value can be evaluated properly for the optimal value of such problem, (3) the algorithm does not have any redundant iterations.     

Anomalous photoluminescence and raman scattering behavior in heavily Mg+ ion-implanted InP

Mg⁺ ions were implanted into highly pure InP grown by the liquid encapsulated Czochralski (LEC) method in which the Mg concentration [Mg] was varied between 1×10¹⁵ cm^–3 and 3×10²⁰ cm^–3. Two annealing methods were used: furnace annealing (FA) up to 740° C and flash lamp annealing (rapid thermal annealing, RTA) up to 900° C. For characterization, photoluminescence (PL) spectra were measured between 2K and room temperature together with Raman scattering measurements at room temperature. An emission designated by g, which was attributed to a novel energy state of an isolated acceptor, was found to be produced for a rather low value of [Mg]. In addition, a broad emission denoted by [g–g], which was ascribed to acceptor-acceptor pairs, was observed below bound exciton emissions for moderate values of [Mg]. These features were quite similar to those previously observed in acceptor-doped GaAs when the background concentration of donors is extremely low. Two additional novel emissions located far below the band-to-acceptor emission were also obtained, and each showed a remarkable energy shift towards lower energy with increasing [Mg]. The binding energies of these emissions were estimated from the temperature dependence of PL spectra and the results suggest that they are complex-type radiative recombination centers, presumably donor-acceptor-type centers. A strong broad emission centered near the band-to-acceptor emission was observed for [Mg]=3×10²⁰ cm^–3. This observation indicates a formation of a new material between In, P and Mg, which was also attested by the appearance of a new TO-like Raman signal for [Mg] greater than 1×10¹⁹ cm^–3. A substantial difference of PL and Raman spectra was revealed for the two annealing methods, suggesting that the annealing behaviour of ion-implanted InP should be investigated more extensively in order to establish reliable annealing procedures.Dedicated to H.-J. Queisser on the occasion of his 60th birthday     

alpha-particle condensation in 16O studied with a full four-body orthogonality condition model calculation

To explore the four-alpha-particle condensate state in 16O, we solve a full four-body equation of motion based on the four-alpha-particle orthogonality condition model in a large four-alpha-particle model space spanned by Gaussian basis functions. A full spectrum up to the 0_{6};{+} state is reproduced consistently with the lowest six 0;{+} states of the experimental spectrum. The 0_{6};{+} state is obtained at about 2 MeV above the four-alpha-particle breakup threshold and has a dilute density structure, with a radius of about 5 fm. The state has an appreciably large alpha condensate fraction of 61%, and a large component of alpha+12C(0_{2};{+}) configuration, both features being reliable evidence for this state to be of four-alpha-particle condensate nature.     

Current transport property in GdBCO coated conductor with artificial pinning centers in a wide range of temperature,magnetic field up to 27 T,and field angle

We have investigated current transport property in Gd₁Ba₂Cu₃O_7−δ coated conductor with artificial pinning centers in a wide range of temperature, magnetic field, B up to 27 T, and field angle. Due to the additional c-axis correlated pins, critical current density, J_c in B//c was enhanced and the improvement was observed in wide range of B. On the other hand, around B⊥c below 65 K, the angular dependence of n-value showed a valley-like behavior, although the J_c was increasing. In addition, the temperature dependence of the pinning force density defined as J_c × B was not scaled on an expected master curve. These results indicate the pinning in B⊥c is governed by different mechanism below 65 K and high magnetic field.     

Estimation of soft X‐ray and EUV transition radiation power emitted from the MIRRORCLE‐type tabletop synchrotron

The tabletop synchrotron light sources MIRRORCLE‐6X and MIRRORCLE‐20SX, operating at electron energies E_el = 6 MeV and E_el = 20 MeV, respectively, can emit powerful transition radiation (TR) in the extreme ultraviolet (EUV) and the soft X‐ray regions. To clarify the applicability of these soft X‐ray and EUV sources, the total TR power has been determined. A TR experiment was performed using a 385 nm‐thick Al foil target in MIRRORCLE‐6X. The angular distribution of the emitted power was measured using a detector assembly based on an NE102 scintillator, an optical bundle and a photomultiplier. The maximal measured total TR power for MIRRORCLE‐6X is P_max? 2.95 mW at full power operation. Introduction of an analytical expression for the lifetime of the electron beam allows calculation of the emitted TR power by a tabletop synchrotron light source. Using the above measurement result, and the theoretically determined ratio between the TR power for MIRRORCLE‐6X and MIRRORCLE‐20SX, the total TR power for MIRRORCLE‐20SX can be obtained. The one‐foil TR target thickness is optimized for the 20 MeV electron energy. P_max? 810 mW for MIRRORCLE‐20SX is obtained with a single foil of 240 nm‐thick Be target. The emitted bremsstrahlung is negligible with respect to the emitted TR for optimized TR targets. From a theoretically known TR spectrum it is concluded that MIRRORCLE‐20SX can emit 150 mW of photons with E > 500 eV, which makes it applicable as a source for performing X‐ray lithography. The average wavelength, = 13.6 nm, of the TR emission of MIRRORCLE‐20SX, with a 200 nm Al target, could provide of the order of 1 W EUV.