5,11-Diazadibenzo[hi,qr]tetracene: Synthesis,Properties, and Reactivity toward Nucleophilic Reagents

5,11-Diazadibenzo[hi,qr]tetracene was synthesized as a new nitrogen-substituted polycyclic heteroaromatic compound by Pd-catalyzed cycloisomerization of an alkyne precursor followed by oxidative cyclization with bis(trifluoroacetoxy)iodobenzene. The substitution of imine-type nitrogen atoms significantly enhanced its electron-accepting character and facilitated the direct nucleophilic addition of arylamines under strongly basic conditions to afford the desired amino-substituted products. The introduction of amino groups induced a remarkable red-shift in their absorption spectra; the tetrasubstituted product exhibited intense near-infrared absorbing property. Furthermore, the π-electronic system, which includes a redox-active 1,4-diazabutadiene moiety, underwent reversible interconversion to its corresponding reduced form upon reduction with NaBH₄ and aerobic oxidation.     

Controlled synthesis of amphiphilic block copolymers with pendant glucose residues by living cationic polymerization

Amphiphilic block copolymers of vinyl ethers (VEs) of the type —[CH₂CH(OCH₂CH₂OR)]_m—[CH₂CH(OiBu)]_n—were synthesized by living cationic polymerization, where R is a D-glucose residue, and m and n are the degrees of polymerization (m = 20–50; n = 11–89). To obtain them, sequential living block copolymerization of isobutyl vinyl ether (IBVE) and the vinyl ether carrying 1,2:5,6-diisopropylidene-D -glucose residue was conducted by using the HCl adduct of IBVE, CH₃CH(OiBu)Cl, as initiator in conjunction with zinc iodide. These precursor block copolymers had a narrow molecular weight distribution (M̄_w/M̄_n ∼ 1.1) and a controlled composition. Treatment of them with a trifluoroacetic acid/water mixture led to the target amphiphiles. The solubility of the amphiphilic block copolymers in various solvents depended strongly on composition or the m/n ratio. Their solvent-cast thin films were observed, under a transmission electron microscope, to exhibit various microphase-separated surface morphologies such as spheres, cylinders, and lamellae, depending on composition. © 1997 John Wiley & Sons, Inc.     

Controlled synthesis of glycopolymers with pendant D-glucosamine residues by living cationic polymerization

D -glucosamine-containing glycopolymers with well-controlled structure were synthesized by living cationic polymerization. To this end, D -glucosamine-containing vinyl ether (VE) of the type [CH₂()CH(OCH₂CH₂OR)] was prepared, where R denotes a 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimide-β-D -glucopyranoside, i.e., the hydroxyl and amino groups in D -glucosamine residues are protected by acetyl and phthaloyl groups, respectively. It was found that (1) the efficient living cationic polymerization of VE monomer is achieved by a combination of ethylaluminum dichloride (EtAlCl₂) with an adduct of trifluoroacetic acid (TFA) and isobutyl VE (IBVE) [CH₃CH(OiBu)OCOCF₃] (i.e., TFA/EtAlCl₂ initiating system); and (2) the polymerization in toluene at the elevated temperature (0°C) is most suitable to proceed the homogeneous polymerization over the whole conversion range. The molecular weight distribution of the resulting polymers was very narrow ($ {\bar M}_w/{\bar M}_n \sim 1.1 $). Quantitative deprotection of the resulting precursor polymers was successfully achieved with hydrazine monohydrate to afford the corresponding water-soluble polymers with pendant D -glucosamine residues. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 751–757, 1997     

Synthesis of polymers in aqueous solutions: Polyaddition of bis(oxazolines) with dithiol in aqueous solutions

Polyaddition of bis(4-mercaptophenyl) sulfide ( BMPS ) with m-phenylenebis(2-oxazoline) ( MPBO ) proceeded very smoothly in the mixtures of aprotic ploar solvents such as N-methyl-2-pyrrolidone ( NMP ) with water to produce the corresponding poly(amide–sulfide) with high molecular weights at 90°C under nitrogen. The reaction of BMPS with MPBO , p-phenylenebis(2-oxazoline), and 1,4-butylenebis(2-oxazoline) was also examined in water under the same conditions, and it was found that the reaction proceeds successfully to give the corresponding poly(amide–sulfide)s with high molecular weights. These results mean that water along as well as the mixed solvents of aprotic polar solvents such as NMP with water can be uses as suitable reaction media for the polyaddition of bis(oxazolines) with dithiol to synthesize poly(amide—sulfide)s with high molecular weights. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2711–2717, 1997     

Unexpected Macrocyclic Multinuclear Zinc and Nickel Complexes that Function as Multitasking Catalysts for CO2 Fixations

Unique self‐assembled macrocyclic multinuclear Zn^II and Ni^II complexes with binaphthyl‐bipyridyl ligands (L) were synthesized. X‐ray analysis revealed that these complexes consisted of an outer ring (Zn₃L₃ or Ni₃L₃) and an inner core (Zn₂ or Ni). In the Zn^II complex, the inner Zn₂ part rotated rapidly inside the outer ring in solution on an NMR timescale. These complexes exhibited dual catalytic activities for CO₂ fixations: synthesis of cyclic carbonates from epoxides and CO₂ and temperature‐switched N‐formylation/N‐methylation of amines with CO₂ and hydrosilane.     

Synthesis and photophysical properties of dinaphtho[2,3-b:2′,3′-i]dihydrophenazine derivatives

A dinaphtho[2,3-b:2′,3′-i]dihydrophenazine (DNP) derivative was synthesized by Buchwald-Hartwig cross-coupling, and its electronic spectrum was compared with that of dinaphtho[b,i]dihydrophenazine-5,18-dione (DNP-dione) as an anthraquinone analog. An absorption band of DNP is attributed to extension of π-conjugation over the entire molecule via the N atom. DNP-dione showed a broad absorption band in the range 450–490?nm due to intramolecular charge-transfer interactions. Additionally, the absolute fluorescence quantum yield of DNP was larger than that of DNP-dione. DNP-dione exhibited reversible oxidation peaks and a similar oxidation potential to DNP, since there are very weak electronic interactions between the anthracene and anthraquinone units across the N atoms with the 4-octyloxyphenyl substituent.     

Optical resolution via catalytic generation of chiral auxiliary

A new catalytic method for separating enantiomers of racemic compounds is proposed. Catalytic asymmetric addition of racemic trans-2-substituted cyclohexanols to imines provided diastereomeric mixtures of aminals, and the subsequent separation of the enantiomers by silica-gel column chromatography and the hydrolysis of the aminals produced the alcohols in an optically active form.     

Tetrachloroferrate (III) Salts of BDH-TTP [2,5-Bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene] and BDA-TTP [2,5-Bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene]: Crystal Structures and Physical Properties

Three FeCl₄ salts based on non-tetrathiafulvalene (TTF) donors, 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene (BDH-TTP) and 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP), have been prepared and characterized as κ-(BDH-TTP)₂FeCl₄, β-(BDA-TTP)₂FeCl₄, and (BDA-TTP)₃FeCl₄ · PhCl. The κ-(BDH-TTP)₂FeCl₄ salt, with a room-temperature conductivity (σ_rt) of 39 S cm⁻¹, is metallic down to 1.5 K, and its magnetic susceptibility obeys the Curie-Weiss law with a Curie constant (C) of 4.25 emu K mol⁻¹ and a Weiss constant (θ) of 0.041 K. β-(BDA-TTP)₂FeCl₄ exhibits metallic behavior (σ_rt=9.4 S cm⁻¹) with a sharp metal-to-insulator (MI) transition (T_MI=113 K) and antiferromagnetic ordering with the Néel temperature of near 8.5 K, whereas the solvated (BDA-TTP)₃FeCl₄ · PhCl salt is a semiconductor with a thermal activation energy of 0.11 eV (σ_rt=2.0× 10⁻² S cm⁻¹) and exhibits Curie-Weiss behavior (C=4.42 emu K mol⁻¹, θ=−0.35 K).     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003