Preferential destruction of metallic single-walled carbon nanotubes by laser irradiation

Upon laser irradiation in air, metallic single-walled carbon nanotubes (SWNTs) in carbon nanotube thin film can be destroyed in preference to their semiconducting counterparts when the wavelength and power intensity of the irradiation are appropriate and the carbon nanotubes are not heavily bundled. Our method takes advantage of these two species' different rates of photolysis-assisted oxidation, creating the possibility of defining the semiconducting portions of carbon nanotube (CNT) networks using optical lithography, particularly when constructing all-CNT FETs (without metal electrodes) in the future.     

Spectroscopic study of laser-induced phase transition of gold nanoparticles on nanosecond time scales and longer

The pulsed laser induced phase transition of gold nanoparticles in aqueous solution was observed via a transient absorption on nanosecond time scales and longer. Gold nanoparticles were excited with an intense picosecond laser pulse (355 nm, 30 ps), and the subsequent changes were monitored using two continuous wave laser wavelengths (488 and 635 nm). On the nanosecond time scale, below 6.3 mJ cm(-2), no change was observed; however, in the low fluence region between 6.3 and 17 mJ cm(-2), gold nanoparticles produced a bleach signal (488 nm) attributed to the melting of the gold nanoparticles, which decreased linearly with increasing laser fluence. Laser fluences above 17 mJ cm(-2) resulted in a strong absorption at both wavelengths, which is ascribed to vaporization of gold nanoparticles rather than solvated electrons (ejected from gold nanoparticles) or light scattering. The decay of both signals was faster than the 5 ns time resolution used in our experimental system. On the microsecond time scale, increase in absorbance at 635 nm was observed with a time constant of 1.0 micros, while no change was observed at 488 nm. It is considered that this increase is attributed to the formation of smaller gold nanoparticles resulting from pulsed laser induced size reduction of initial gold nanoparticles.     

Crystallization behaviors of poly(3-hydroxybutyrate) and poly(l-lactic acid) in their immiscible and miscible blends

By adjusting the molecular weight of the poly(l-lactic acid) (PLLA) component in poly(3-hydroxybutyrate) (PHB)/PLLA blends, we investigated the crystallization behaviors of the two components in their immiscible and miscible 50:50 blends by real time infrared (IR) spectroscopy. In the immiscible PHB/PLLA blend, the stepwise crystallization of PHB and PLLA was realized at different crystallization temperatures. PLLA crystallizes first at a higher temperature (120 degrees C). Its crystallization mechanism from the immiscible PHB/PLLA melt is not affected by the presence of the PHB component, while its crystallization rate is substantially depressed. Subsequently, in the presence of crystallized PLLA, the isothermal melt-crystallization of PHB takes place at a lower temperature (90 degrees C). It is interesting to find that there are two growth stages for PHB. At the early stage of the growth period, the Avrami exponent is 5.0, which is unusually high, while in the late stage, it is 2.5, which is very close to the reported value (n approximately 2.5) for the neat PHB system. In contrast to the stepwise crystallization of PHB and PLLA in the immiscible blends, the almost simultaneous crystallization of PHB and PLLA in the miscible 50:50 blend was observed at the same crystallization temperature (110 degrees C). Detailed dynamic analysis by IR spectroscopy has disclosed that, even in such apparently simultaneous crystallization, the crystallization of PLLA actually occurs faster than that of PHB. It has been found that, both in the immiscible and miscible blends, the crystallization dynamics of PHB are heavily affected by the presence of crystallized PLLA.     

Molecular recognition of mono- and disaccharides through interaction with p-iodophenylboronic acid in capillary electrophoresis with a chemiluminescence detection system

Molecular recognition of mono- and disaccharides was performed making use of the interaction between their diol groups and p-iodophenylboronic acid in capillary electrophoresis (CE) with a chemiluminescence (CL) detection system. p-Iodophenylboronic acid acted as an enhancer for luminol-horseradish peroxidase-hydrogen peroxide CL reaction. p-Iodophenylboronic acid was injected as a sample into the present system to give a CL peak on the electropherogram. The CL intensities were examined using running buffers including mono- and disaccharides. The CL intensities with 1-methyl-D-glucoside, D-saccharose, D-maltose, D-glucose, and D-fructose decreased in this order. The decrease in CL intensity was based on the formation by p-iodophenylboronic acid of cyclic esters with mono- and disaccharides, particularly with those including cis-diol groups. That is, the decrease in CL intensity affected the specific complexation between p-iodophenylboronic acids and saccharides, leading to the molecular recognition of saccharides. We also report separation of a mixture of p-iodophenol and p-iodophenylboronic acid as well as estimation of the apparent binding constant between p-iodophenylboronic acid and saccharides taking advantage of their molecular recognition behavior.     

Affinity capillary electrophoresis with a DNA-nanoparticle conjugate as a new tool for genotyping

We have developed a novel method for genotyping based on free solution affinity capillary electrophoresis. We prepared DNA-nanoparticle conjugates by mixing biotin-modified DNA and NeutrAvidin-modified polystyrene nanoparticles; this mixture was then injected into a capillary. Subsequently, we injected the fluorescent-labeled sample DNAs into the capillary, applied the voltage, increased its temperature after 7 min, and detected the fluorescence at its anodic end. This novel method was applied for genotyping human c-K-ras, and the three genotypes were definitely distinguishable with high reproducibility. This method can be easily automated, and it is useful for high-throughput gene mutation analysis.     

Kinetic study of thermal Z to E isomerization reactions of azobenzene and 4-dimethylamino-4'-nitroazobenzene in ionic liquids [1-R-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with R = butyl, pentyl, and hexyl

Thermal Z to E isomerization reactions of azobenzene and 4-dimethylamino-4'-nitroazobenzene were examined in three ionic liquids of general formula 1-R-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (R = butyl, pentyl, and hexyl). The first-order rate constants and activation energies for the reactions of azobenzene measured in these ionic liquids were consistent with those measured in ordinary organic solvents, which indicated that the slow isomerization through the inversion mechanism with a nonpolar transition state was little influenced by the solvent properties, such as the viscosity and dielectric constant, of ionic liquids. On the other hand, the rate constants and the corresponding frequency factors of the Arrhenius plot were significantly reduced for the isomerization of 4-dimethylamino-4'-nitroazobenzene in ionic liquids compared with those for the isomerization in ordinary organic molecular solvents with similar dielectric properties. Although these ionic liquids are viscous, the apparent viscosity dependence of the rate constant could not be explained either by the Kramers-Grote-Hynes model or by the Agmon-Hopfield model for solution reactions. It is proposed that the positive and the negative charge centers of a highly polar rotational transition state are stabilized by the surrounding anions and cations, respectively, and that the ions must be rearranged so as to form highly ordered solvation shells around the charge centers of the reactant in the transition state. This requirement for the orderly solvation in the transition state results in unusually small frequency factors of 10(4)-10(7) s(-1).     

Chemiluminescence from singlet oxygen under laminar flow condition in a micro-channel

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by syringe pumps, providing a laminar flow. Such a laminar flow forms a liquid–liquid interface instantly in a micro-channel, and then the interface collapses gradually through molecular diffusion with the residence times. The chemiluminescence from the singlet oxygen was emitted in the course of the collapse of the interface under laminar flow condition. The chemiluminescence intensity was observed continuously and stably in the micro-channel as long as the reagents were fed into the channel. We examined the features of the chemiluminescence emitted in the micro-channel by changing the flow rates of reagents and the detection points in the micro-channel. The data obtained were considered along with the residence times and diffusion lengths. We also examined the effects of antioxidants, such as sodium azide, histidine, nitroblue tetrazolium, and 2-propanol on the chemiluminescence intensity.     

QUantitative Cross-Polarization at magic-angle spinning frequency of about 20 kHz

We study the QUantitative Cross-Polarization (QU-CP) method proposed by Hou et al. (Chem. Phys. Lett. 421 (2006) 356) under the moderate MAS speed of 23 kHz, re-examining its two building blocks, namely, the CP polarization transfer from (1)H to (13)C, and the thermal equalization of the (13)C magnetizations. We show that the nuclear-integrated cross-polarization (NI-CP) scheme is conveniently used for (1)H-(13)C polarization transfer, because of its simplicity, robustness to rf-mismatch, and compatibility with fast sample spinning. In the mixing part, in addition to dipolar-assisted rotational-resonance (DARR) recoupling, we examine the Phase-Alternated Recoupling Irradiation Schemes (PARIS and PARIS(xy)), and Second-order Hamiltonian among Analogous Nuclei Generated by Hetero-nuclear Assistance Irradiation (SHANGHAI) sequences, and show that SHANGHAI gives the best performances in equalizing the (13)C magnetizations.     

Iron-Catalyzed Biomimetic Dimerization of Tryptophan-Containing Peptides

Biomimetic oxidative dimerization of tryptophan derivatives in aqueous media with oxygen as a bulk oxidant catalyzed by an iron octacarboxy phthalocyanine complex was established. The discovery of the extremely active iron catalyst enables aerobic enzyme-mimetic oxidation to be performed in a flask. This method was applicable to the oxidative dimerization of a wide range of tryptophan derivatives, including various dipeptides and oligopeptides, with remarkable functional-group tolerance without the protection of the amino acid residues. Furthermore, oxidative dimerization of tryptophan derivatives bearing dioxopiperazine units enabled the convergent total synthesis of five natural pyrroloindole compounds and unnatural congeners. The established chemical method provides facile access to a broad range of dimerized peptides with a unique scaffold to link two turn structures, which will serve as a powerful tool to create new small- and medium-sized-molecules as drug candidates.     

Reactions of benzeneselenyl and benzenesulfenyl chlorides with syn‐ and anti‐9,9′‐bibenzonorbornenylidenes

Reaction of syn‐9,9′‐bibenzonorbornenylidene (1a) with benzeneselenyl chloride produced vic‐dichloride (4) exclusively, which corresponds to the cis‐addition product of 1a with molecular chlorine, with retention of the original alkene configuration. Moreover, the reaction of anti‐9,9′‐bibenzonorbornenylidene (1b) with benzeneselenyl chloride gave the same vic‐dichloride (4) exclusively with inversion of the original alkene configuration. No expected benzeneselenyl chloride adducts were formed in both cases. On the other hand, reactions of 1a and 1b with benzenesulfenyl chloride only resulted in the syn–anti isomerization of the alkenes without any adduct formation. Mechanisms of these reactions are discussed in some detail. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:625–629, 2001