Uranium determination by133Xe in meteorites; comparative study with fission track and/or239Np methods and thermal release character of133Xe

Uranium concentrations in three types of inclusions of the Allende (C III), a bulk sample of the Plainview (H5), and a bulk and 5 to 15 density separates of the Huckitta pallasite were determined and discussed by comparing the results from homogenized fission track and/or²³⁹Np analyses with the¹³³Xe results. Stepwise heating experiment revealed that the¹³³Xe release from the Plainview is bimordal and incomplete by a simple heating at 1600 °C, and that the¹³³Xe releases in the Huckitta bulk and metallic samples are multitudinous but can be extracted rather completely at 1600–1700 °C. In the Huckitta, uranium-rich phase (∼100 ppb) was in the lightest density fraction of d=2.9–3.3, but the bulk uranium was found to be mostly from the heavy metal-rich fraction of d>4.2.     

Synthesis and anti-HIV-1 activity of novel 10-thiaisoalloxazines,a structural analog of C-5 and/or C-6 substituted pyrimidine acyclonucleoside

A series of novel 10-thiaisoalloxazine derivatives bearing an alkoxymethyl or benzyloxymethyl moiety at the N-1 position has been synthesized through the bromination of 1-substituted-5-hydroxyuracils and subsequent condensation with aminobenzenethiol in a one-pot reaction. Contrary to the previous report, the formation of intermediary 5,6-diethoxy-5-hydroxy-5,6-dihydrouracil seems to be not the necessary factor for the formation of the thiaisoalloxazines, since the reaction proceeds in tetrahydrofuran (THF) or acetonitrile far more smoothly than in ethanol. The anti-human immunodeficiency virus (HIV)-1 activity of the resulted thiaisoalloxazine derivatives was evaluated in lymphocyte cells based on the inhibitory activity against the viral-induced cytopathic activity. Among the derivatives, compounds 6, 7, and 8 bearing an alkoxymethyl moiety at the N-1 position exhibited modest inhibitory activity towards the cytotopathic effect of HIV-1.     

Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.     

Development of novel chiral urea catalysts for the hetero-Michael reaction

Chiral urea compounds 10a-g were synthesized as catalysts for conjugate addition of pyrrolidine (2) to gamma-crotonolactone (3). In the presence of a catalytic amount of the chiral ureas, this hetero-Michael reaction was greatly accelerated. Asymmetric induction was observed with the catalysts 10e, 10f, and 10g.     

Studies on the syntheses of analgesics. Part 50. Synthesis of optically active 2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid. [Studies on the syntheses of heterocyclic compounds. Part 742]

2-[4-(1-Oxo-2-isoindolinyl)phenyl]propanoic acid ( 1 ) having a potent analgesic and anti-inflammatory activity could be obtained by three methods, which were found to provide extremely useful ways for the synthesis of 1 from the industrial point of view. (E)- and (Z)-Isomers of 2-butenoic acid and oxiranecarboxylic acid derivatives as the intermedaites in the synthesis of 1 were separated and characterized. Furthermore, the optical resolution of (±)-2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid was successfully achieved using cinchonidine as a resolution reagent.     

One-pot preparation of chiral beta-amino esters by rhodium-catalyzed three-components coupling reaction

Chiral beta-amino esters are synthesized in one-pot from three components, amines, aldehydes, and ethyl bromoacetate, under the rhodium-catalyzed Reformatsky-type reaction condition, where complete diastereoselection is achieved in the nucleophilic addition step of ethyl bromoacetate to the imines prepared in     

Liquid chromatographic assay for constituent disaccharides of hyaluronic acid and chondroitin sulphate isomers

An improved high-performance liquid chromatographic (HPLC) method for unsaturated disaccharides prepared from hyaluronic acid and various chondroitin sulphate and dermatan sulphate isomers was developed, which involves an ion-exchange resin prepared from a sulphonated styrene-divinylbenzene copolymer. The retention times of the individual unsaturated disaccharides were unique and reproducible, the disaccharides appearing in the following order: unsaturated non-sulphated disaccharide derived from hyaluronic acid, then unsaturated 6-sulphated, non-sulphated and 4-sulphated disaccharides from chondroitin sulphate isomers. Unsaturated disulphated disaccharide G had a much shorter retention time than the unsaturated non-sulphated disaccharide derived from hyaluronic acid. The contents of these individual unsaturated disaccharides could be determined with similar sensitivities on the basis of their ultraviolet absorbance. Selective and unique retention times and good resolutions were found for various unsaturated disulphated and trisulphated disaccharides. The proposed method can be used to determine various chondroitin sulphate and dermatan sulphate isomers in addition to hyaluronic acid in amounts as small as 100 ng to 8 micrograms. The practicality of this method was verified by its application to the separation and determination of the different types of chondroitin sulphate and dermatan sulphate isomers derived from human arteries in the presence of appreciable amounts of hyaluronic acid.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Polyhydroxy pregnanes from Dregea volubilis

Three new polyhydroxy pregnanes named dregealol (1), volubilogenone (2) and volubilol (3) were isolated from the flowers of Dregea volubilis, and their structures elucidated from extensive 2D NMR analysis. The structure of volubilol (3) was confirmed by X-ray crystallographic studies. The known pregnane derivatives drevogenin D, iso-drevogenin P and 17α-marsdenin were also isolated.