Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Dynamic Visualization of Free Radicals at Single Oxygen Bubbles using Chemiluminescence

The generation of free radicals is a key process in the formation and the collapse of the bubbles in water, however, the direct and dynamic observation of the radicals in this process at single bubbles has never been achieved. Here, the hydroxyl (OH^.) and oxygen (O₂^.−) radicals at single oxygen bubbles are continuously traced using chemiluminescence (CL), in which these radicals at the bubble react with the surrounding luminol in the solution emitting the light. Varied increase trends of luminescence are observed in the generation of a bubble, floating, short parking at the water/air interface and the final explosion, revealing the complexity in the distribution of radicals at the bubble unprecedentedly. Despite more radicals are observed at the bubble generated at a deep position under the water for the stabilization, almost the same amount of radicals are included in the bubbles that is independent on the water pressure during the production of the bubble. This rich information collected from the dynamic study of bubbles illustrates the complicated generation and distribution process of radicals at the bubbles, and will facilitate the understanding of the function about the bubbles.     

The Effect of Oleic Acid Emulsification using SPE on Fluorite and Dolomite Flotation**

Collector OA, oleic acid, is widely used industrially for fluorite flotation. Low selectivity, dispersibility and collecting capability of the OA collector are always observed. In this study, compared with flotation of dolomite, a collector mixture of OA and SPE (styrylphenol polyoxyethylene ether) demonstrated significantly better performances for the fluorite. An optimal mass ratio 4 : 1 OA : SPE was found, and the recovery of fluorite was increased from over 85 % to more than 94 % compared with pure OA. Furthermore, the dosage of the collector agent was reduced from 50 mg mL⁻¹ to 20 mg mL⁻¹, which did not negatively impact the recovery of dolomite. The results from the contact angle tests indicated that SPE selectively increased the surface hydrophobicity of fluorite but had little effect on dolomite. Besides, zeta potential measurements and IR analyses revealed that the addition of SPE led to strong chemical adsorption on the surface of fluorite, resulting in a significant difference in the flotation performances of the two minerals. Therefore, SPE-emulsified OA is corroborated to prompt more selectivity and collecting capability on flotation of fluorite over dolomite.     

SiOx encapsulated FeSi2–Si eutectic nanoparticles as durable anode of lithium-ion batteries

Low-cost and high-efficiency production of silicon-based material is the key to improve the energy density of lithium-ion batteries. Herein, we propose a novel structure of FeSi₂–Si eutectic nanoparticles protected by the SiO_x shell. FeSi₂, as a buffer phase can improve the electrochemical stability of the electrode. A SiO_x shell is formed on the surface of the nanoparticles through the passivation process. SiO_x encapsulated FeSi₂–Si eutectic nanoparticles exhibit excellent capacity of 674.9 mAh/g after 500 charge/discharge cycles. The capacity retention rate is above 90% after the stabilization process. This work provides a new nanomaterial design for high performance silicon-based anode materials of lithium-ion batteries.     

Enhanced Oral Absorption of Icaritin by Using Mixed Polymeric Micelles Prepared with a Creative Acid-Base Shift Method

The purpose of this study was to develop mixed polymeric micelles with high drug loading capacity to improve the oral bioavailability of icaritin with Soluplus^® and Poloxamer 407 using a creative acid-base shift (ABS) method, which exhibits the advantages of exclusion of organic solvents, high drug loading and ease of scaling-up. The feasibility of the ABS method was successfully demonstrated by studies of icaritin-loaded polymeric micelles (IPMs). The prepared IPMs were characterized to have a spherical shape with a size of 72.74 ± 0.51 nm, and 13.18% drug loading content. In vitro release tests confirmed the faster release of icaritin from IPMs compared to an oil suspension. Furthermore, bioavailability of icaritin in IPMs in beagle dogs displayed a 14.9-fold increase when compared with the oil suspension. Transcellular transport studies of IPMs across Caco-2 cell monolayers confirmed that the IPMs were endocytosed in their intact forms through macropinocytosis, clathrin-, and caveolae-mediated pathways. In conclusion, the results suggested that the mixed micelles of Soluplus^® and Poloxamer 407 could be a feasible drug delivery system to enhance oral bioavailability of icaritin, and the ABS method might be a promising technology for the preparation of polymeric micelles to encapsulate poorly water-soluble weakly acidic and alkaline drugs.     

Flexible all-solid-state supercapacitor based on polyhedron C-ZIF-8/PANI composite synthesized by unipolar pulse electrodeposition method

Journal of Solid State Electrochemistry - In this work, the unipolar pulse electrodeposition (UPED) method is used to electrodeposit the conductive polyaniline (PANI) on the carbonized polyhedron...     

From borophosphate to fluoroborophosphate: a rational design of fluorine-induced birefringence enhancement

The introduction of oxofluoride anion into anionic group assists to tune optical properties owing to the change of coordination,electronegativity,and according anionic framework.Here,we proposed a rational design of new compounds by fluorine-driven structure and optical property evolution.A new borophosphate Ba_2BP_3O_(11)with the monoclinic space group P2_1/c has been synthesized in the sealed system.Ba_2BP_3O_(11)exhibits a rare P–O–P bridge formation,which is the first example in alkaline-earth metal borophosphates.By further substituting[BO_4]~(3-)with[BO_3F]~(4-),the first alkaline-earth metal/lead fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) with the same space group were designed.Since the scissors effect of fluorine,in M_2BP_2O_8F (M=Ba and Pb),a BO_3F tetrahedron corner-sharing with three PO_4tetrahedra forms 1D chains along the b-axial direction,which are filled by MO_n(M=Ba/Pb,n=5,6,8) distorted polyhedra.The first principles calculation shows that the borophosphate Ba_2BP_3O_(11)has a birefringence about 0.013@1,064 nm,while the fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) have the values of 0.035 and 0.043@1,064 nm,respectively.Such an apparent enhancement in birefringence is derived from synergies of the oxyfluoride and cation.The introduction of fluorine-containing heteroanionic groups provides a feasible strategy to design novel promising optical materials.     

Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-β-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.     

Anti-Inflammatory Activity and Mechanism of Isookanin,Isolated by Bioassay-Guided Fractionation from Bidens pilosa L.

Bidens pilosa L. (Asteraceae) has been used historically in traditional Asian medicine and is known to have a variety of biological effects. However, the specific active compounds responsible for the individual pharmacological effects of Bidens pilosa L. (B. pilosa) extract have not yet been made clear. This study aimed to investigate the anti-inflammatory phytochemicals obtained from B. pilosa. We isolated a flavonoids-type phytochemical, isookanin, from B. pilosa through bioassay-guided fractionation based on its capacity to inhibit inflammation. Some of isookanin’s biological properties have been reported; however, the anti-inflammatory mechanism of isookanin has not yet been studied. In the present study, we evaluated the anti-inflammatory activities of isookanin using lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. We have shown that isookanin reduces the production of proinflammatory mediators (nitric oxide, prostaglandin E₂) by inhibiting the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in LPS-stimulated macrophages. Isookanin also inhibited the expression of activator protein 1 (AP-1) and downregulated the LPS-induced phosphorylation of p38 mitogen-activated protein kinase (MAPK) and c-jun NH₂-terminal kinase (JNK) in the MAPK signaling pathway. Additionally, isookanin inhibited proinflammatory cytokines (tumor necrosis factor-a (TNF-α), interleukin-6 (IL-6), interleukin-8 (IL-8), and interleukin-1β (IL-1β)) in LPS-induced THP-1 cells. These results demonstrate that isookanin could be a potential therapeutic candidate for inflammatory disease.