Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Determination of magnesium and calcium ions in seawater by capillary zone electrophoresis

Capillary zone electrophoresis is proposed for the determination of magnesium and calcium ions in seawater. A carrier solution containing EDTA was adopted for the complexation of these ions and the effect of sodium chloride concentration in the sample solutions on the results was examined. It was found that magnesium and calcium ions could be determined without any pretreatment by injecting 100-fold diluted seawater samples. Linear calibration graphs were obtained for standard solutions containing up to 10.0 mg/l of calcium ion when both peak area and peak height were used. On the other hand, a linear calibration graph was obtained for standard solutions containing up to 20.0 mg/l of magnesium ion when the peak area was used, while a curved one was obtained when the peak height was used. Relative standard deviations were 0.8 and 1.2% when a standard solution containing 5.0 mg/l of magnesium and 8.0 mg/l of calcium ions was analysed 8 times using the peak area. Limits of detection for magnesium and calcium ions were 0.13 and 0.26 mg/l, respectively. The proposed method was applied to the determination of magnesium and calcium ions in surface and bottom seawater samples.     

Synthesis,stability, and spectroscopic and electronic properties of three benzocyclohepta[alpha]azulenylium ions

Novel pi-systems, three benzocyclohepta[alpha]azulenylium ions, 7a-c, are synthesized, and their stability and properties have been characterized in terms of the position of the benzo-annulation and compared with those of the parent cyclohepta[alpha]azulenylium ion 4. Benzocyclohepta[6,7-alpha]azulenylium ion (7a) (p K R+ = 7.3, E red = -0.567 V vs Ag/Ag+) and benzocyclohepta[6,5-alpha]azulenylium ion (7b) (p K R+ = 5.1, E red = -0.482 V vs Ag/Ag+), which are annulated with benzene on the position having a high bond order of 4, are not appreciably destabilized compared with cyclohepta[alpha]azulenylium ion (4) (p K R+ = 7.3, E red = -0.458 V vs Ag/Ag+). On the other hand, benzocyclohepta[7,6-alpha]azulenylium ion (7c) (p K R+ = 1.6, Ered = -0.197 V vs Ag/Ag+) is considerably destabilized, probably due to enhanced contribution of the quinoid structure of the benzene ring, which is annulated on the position having a low bond order of the cyclohepta[alpha]azulenylium ion moiety. Furthermore, the cations 7a and 7b are more stable than 12,13-dihydrobenzocyclohepta[7,6-alpha]azulenylium ion (25) (p K R+ = 4.8, E red = -0.513 V vs Ag/Ag+), which is a dihydrogenated compound of 7a, while 7c is less stable than 25. These features are reflected in the considerable red shift of the longest absorption maximum of the electronic spectrum of 7c, as compared with those of 4, 7a, and 7b, and in the chemical shifts of the protons and their coupling constants of the (1)H NMR spectra. Furthermore, the (1)H NMR spectra and electronic spectra of 5H-benzocyclohepta[6,7-alpha]azulen-5-one (8a) and 7H-benzocyclohepta[6,5-alpha]azulen-7-one (8b) in acidic media have also been studied to clarify the spectral characteristics similar to those of 7a and 7b.     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

Isoelectric focusing of catalase from acatalasemic mouse and human blood, and cultured human skin fibroblasts

Hemolysates of normal, heterozygous hypocatalasemic and acatalasemic mice and of Japanese acatalasemic subjects were separated into three fractions, A, B and C, by DEAE-cellulose column chromatography, and pI values of A, B and C fractions were determined by isoelectric focusing. The pI value of catalase in the A, B and C fractions increased in the order of normal, hypocatalasemic and acatalasemic mouse blood. The results obtained from Japanese acatalasemic blood samples showed that the pI values of catalase in the A, B and C fractions were similar to those in normal blood. Catalase in Japanese acatalasemic cultured skin fibroblasts was also analyzed by isoelectric focusing. The pI values of catalase in the extract from the cultured skin acatalasemic fibroblasts was similar to that in normal fibroblasts.     

THE 'OPSIN SHIFT' IN BACTERIORHODOPSIN: STUDIES WITH ARTIFICIAL BACTERIORHODOPSINS

Abstract— The difference (in cm⁻¹) in absorption maxima between the protonated Schiff base of retinals and the pigment derived therefrom has been defined as the opsin shift. It represents the influence of the opsin binding site on the chromophore. The analysis of the opsin shifts of a series of dihydrobacteriorhodopsins has led to the external point-charge model, which in addition to a counter anion near the Schiff base ammonium, carries another negative charge in the vicinity of the β-ionone ring. This is in striking contrast to the external point-charge model proposed earlier for the bovine visual pigment. The absorption maxima of rhodopsins formed from bromo- and phenyl retinals support the two models. A retinal carrying a photoaffinity label has yielded a nonbleachable bacteriorhodopsin.     

Extraction equilibria for the 4-(2-Pyridylazo)-Resorcinol-Nickel(II)-Quaternary-Ammonium salt system

The extraction equilibria of nickel(II)-PAR complexes with tetradecyldimethylbenzylammonium chloride(Q⁺Cl^?) are investigated. Two kinds of nickel complex are extracted by chloroform: Ni(HR)₂,nQ⁺Cl^?₍₀₎(?⁵⁰⁰ = 3.73·10⁴l mol^?1cm^?1) at about pH 5 and 2Q⁺ NiR^2-_2(o)(?⁵⁰⁰ = 8.08·10⁴ l mol^?1 cm^?1) at above pH 8.5. The extraction constant for 2Q⁺ NiR^2-_2(o) was evaluated as [2Q⁺ NiR^2-₂]₀/[NiR^2-₂] [Q⁺]² = 10^11.16 at μ = 0.1 (Na₂SO₄. Synergic extraction studies of the Ni(HR)₂ species under slightly acidic conditions show that the species is Ni(HR)₂(H₂O)₂in auqeous solution and is extracted into chloroform as the adduct Ni(HR)₂(TBP)₂ (?⁵³⁵ = 3.57·10⁴ l mol^?1 cm^?1. Based on the extraction behavior of these complexes, the structures of the Ni²⁺—PAR complexes are discussed.     

The first example of regiospecific magnesium carbenoid 1,3-CH insertion: its mechanism and stereochemistry

Addition reaction of two geometrical isomers of 1-chlorovinyl p-tolyl sulfoxides, derived from unsymmetrical ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of tert-butyl acetate gave single isomers of the adduct, respectively. Treatment of each diastereomer with i-PrMgCl resulted in the formation of magnesium carbenoids. Highly regiospecific 1,3-CH insertion reaction was found to take place from the magnesium carbenoids to afford cyclopropanes in high yields. Stereochemistry of the adducts, reaction mechanism, and origin of the regiospecificity are discussed.     

Ionic conduction of the perovskite-type halides

The ionic conduction in the perovskite-type halides, CsPbCl₃, CsPbCl₃ and KMnCl₃, was studied. Measurements were made of ac conductivity at temperatures from 150°C to the melting point, and of ionic transport number using the Tubandt, EMF and ion-blocking methods. The effects of impurity doping on the ionic conductivity of CsPbCl₃ were also studied using the samples of composition, CsPb_0.99M_0.01Cl_2.99 (M = Li, Na, K, Ag). It was concluded that these materials are halide-ion condcutors. The ionic conductivities of CsPbCl₃ and CsPbBr₃ are close to those of the well known halide-ion conductors, PbCl₂ and PbBr₂. The ionic transport numbers were found to be > 0.9 for CsPbCl₃ and CsPbBr₃, and about 0.99 for KMnCl₃. The conduction was considered to be caused by the migration of halide-ion vacancies V_X (X = Cl, Br). The activation energies for the migration of V_X were 0.29 eV for CsPbCl₃, 0.25 eV for CsPbBr₃ and 0.39 eV for KMnCl₃. The vacancy diffusion coefficients of these materials were found to be verylarge. However, the impurity doping did not increase the ionic conductivity markedly because of small dopant solubility.