Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Drying dissipative structures of the aqueous suspensions of monodisperse bentonite particles

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the fractionated and monodisperse bentonite particles (plate-like in their shape) in aqueous deionized suspension and in the presence of NaCl have been studied on a cover glass. The patterns coexisted with the broad ring of the hill accumulated with the particles and with the round hills are formed around the outside edges of the film and in the center, respectively, in the macroscopic scale. By the addition of NaCl the pattern shifts from the broad ring to the round hill in the center. The spoke-like cracks, which have been observed for the suspensions of the spherical particles so often hitherto, are not observed at all for the bentonite suspensions. The characteristic convection flow of the particles and the interactions among the particles and substrate are important for the macroscopic pattern formation. Wrinkled, branch-like and/or star-like fractal patterns are observed in the microscopic scale. These patterns are determined mainly by the electrostatic and polar interactions between the particles and/or between the particle and the substrate in the course of drying.     

Novel and efficient method for esterification, amidation between carboxylic acids and equimolar amounts of alcohols, and amines utilizing Me2NSO2Cl and N,N-dimethylamines; its application to the synthesis of coumaperine, a natural chemopreventive dieneamide

Various carboxylic esters or amides were prepared in good to excellent yield between carboxylic acids and equimolar amounts of alcohols or amines under very mild conditions (0-45°C; within 3 h) using dimethylsulfamoyl chloride (Me₂NSO₂Cl; 1) combined with N,N-dimethylamines (Me₂NR: 2a; R=Me, 2b; R=Bu). The choice of the sulfamoyl chloride and the amine is crucial for the reaction; that is, sterically uncrowded amines accelerated the present esterification and amidation. This agent had some advantages over methanesulfonyl chloride (3)/amines as for the atom-economy, avoidance of side reactions, and had very high chemoselectivity toward the carboxyl group vs the hydroxyl group; the experiment was performed by the addition of 1 to the mixture of carboxylic acids and alcohols. Application of this method to the synthesis of coumaperine, a chemopreventive natural product, was performed using the present amidation as a key step.     

Self-organized lipid-porphyrin bilayer membranes in vesicular form: nanostructure,photophysical properties,and dioxygen coordination

An amphiphilic tetraphenylporphyrin and its iron complex bearing four phospholipid substituents, in which a trimethylolethane residue connects the two acyl chains (lipid-porphyrins), have been synthesized. The free-base lipid-porphyrin 6a self-organizes in aqueous media to form spherical unilamellar vesicles with a diameter of 100 nm and a uniform thickness of 10 nm, which corresponds to twice the length of the molecule. In the visible absorption spectrum, the porphyrin Soret band was significantly red-shifted (12 nm) relative to that of the monomer in benzene/MeOH solution due to the excitonic interaction of the porphyrin chromophores. The [symbol: see text]-A isotherm of 6a gave an area per molecule of 2.2 nm2, which allowed the estimation of the number of molecules in a single vesicle (2.3 x 10(4)). Double-layered Langmuir-Blodgett (LB) films of 6a on a glass surface exhibited an absorption spectrum identical to that of the 6a vesicles in bulk aqueous solution, and this suggests that they contain similar geometric arrangements of the porphyrin moieties. Exciton calculations on the basis of our structural model reproduced the bathochromic shift of the Soret band well. In the photophysical properties of the 6a vesicles, the characteristics of J-aggregated porphyrins substantially predominate: strong fluorescence and extremely short triplet lifetime. The iron complex 6b with a small molar excess of 1-dodecylimidazole (DIm) also formed spherical unilamellar vesicles (100 nm phi). Scanning force microscopy after evaporation on a graphite surface revealed 6b/DIm vesicles with a vertical height of 19.8 nm, which coincided with the thickness of the double bilayer membranes. The ferrous 6c formed a bis(DIm)-coordinated low-spin FeII complex under an N2 atmosphere. Upon addition of O2 to this solution, a kinetically stable O2 adduct was formed at 37 degrees C with a half-life of 17 h. Distinct gel-phase (liquid-crystal) transitions of the lipid-porphyrin membranes were clearly observed; the free base 6a displayed a higher transition temperature (56 degrees C) than the iron complex. Magnetic circular dichroism and infrared spectroscopic studies proved that molecular O2 coordinates to the self-organized lipid-porphyrinatoiron(II) vesicles in aqueous media.     

Synthesis and absolute configuration of +-lineatin,the pheromone of trypodendronlineatum

A new synthesis of (±), (+)- and (-)-lineatin (3,3,7-trimethyl-2, 9-dioxatricyclo [3.3.1.0^4,7] nonane, $\text{1}$) was achieved. The stereochemistry of (+)-lineatin was established as 1$\text{R}$, 4$\text{S}$, 5$\text{R}$, 7$\text{R}$ by an X-ray crystallographic analysis of an intermediate $\text{1}$$\text{5}$.     

Surface free energies of styrene-acrylic acid copolymer plates prepared in various frames

Styrene (St)-acrylic acid (AA) copolymer plates were synthesized in the frames made of glass, aluminum (Al) and poly(difluoroethylene) (PDFE). Surface properties of the prepared copolymer plates were characterized with regard to critical surface tension ( _C ), chemical components by IR analysis and surface energies (total energy, _S ; dispersion force components, _S ^d ; polar component, _S ^p ; hydrogen bonding component, _S ^h ) and the following results were obtained.The _C values of the copolymer plates increased with AA content and also depended on the sort of the used frame. The increasing order of the _C values of the copolymer plates corresponded to those of the used frames, namely, PDFE frame < Al frame < Glass frame.The prepared copolymer plates with low AA contents (ca. 10 mol%) were enriched in the AA moiety in the surface layer regardless of the kind of the used frame.The total and the individual components of the surface free energies of the copolymer plates were largely affected by the property of the used frame. The glass frame gave the plate with higher _S ^h values suggesting preferential orientation of the polar site of AA component.     

Coordination reaction of cobaloxime with 4-vinylpyridine-styrene copolymer

The equilibrium constants of the coordination reaction of chlorodimethylformamide·cobaloxime with 4-vinylpyridine–styrene copolymers (PPS) were determined. The constants for PPS, which contain 20–50% 4-vinylpyridine (4VP) unit, measured about 1.3 × 10⁵ liter/mole larger than those in the pyridine system (6.8 × 10⁴ liter/mole). When the polymer ligand is 4VP homopolymer or contains less than 20% 4VP unit, K values are lower. The rate constants (k_f) of the coordination reactions of the cobaloxime with polymer ligands were also measured in dimethylformamide (DMF) and benzene. In DMF k_f decreased with an increase in 4VP unit content of the polymer ligand; in benzene it was increased by the 4VP fraction. These results can be explained by the variation in conformation of the polymer chain in each solvent. The effect of the polymer chain on complexation was discussed on the basis of the kinetic data.     

Computational examination of the electrophilic reaction on oxidative polymerization of phenyltrimethylsilane with sulfur chloride

Phenyltrimethylsilane possesses a higher HOMO energy (–9.34 eV) than nonsubstituted benzene (>0.41 eV). The π electron of the phenyltrimethylsilane localizes on the benzene ring at the ipso position rather than at the para position. Two center energies calculated by the MNDO-PM3 method indicate that the C? Si bond is facilitated to cleave in comparison with the C? H (para position) one of the benzene ring. Phenyltrimethylsilane and phenyl bis(trimethylsilane) were polymerized with sulfur chloride through the cationic oxidative polymerization. The product is isolated as oligo(p-phenylene sulfide), with a melting point of 150–190°C. An electrophile attacks the carbon atom linked to the Si atom in phenyltrimethylsilane. The new synthetic route of PPS can be established on the basis of the computational calculation.     

ε-optimality criteria for convex programming problems via exact penalty functions

In this paper, we present-optimality criteria for convex programming problems associated with exact penalty functions. Several authors have given various criteria under the assumption that such convex problems and the associated dual problems can be solved. We assume the solvability of neither the convex problem nor the dual problem. To derive our criteria, we estimate the size of the penalty parameter in terms of an-solution for the dual problem.