Improvement in flow-sheet of extraction chromatography for trivalent minor actinides recovery

Journal of Radioanalytical and Nuclear Chemistry - Extraction chromatography flow-sheet employing octyl(phenyl)-N,N-diisobutylcarbonoylmethylphosphine oxide and bis(2-ethylhexyl) hydrogen phosphate...     

The required sample size in measuring oblique incidence absorption coefficient Experimental study

It is an important issue to clarify the minimum required size of a specimen for the accurate measurement of oblique incidence absorption coefficient. Investigation is made on the basis of experimental studies in a laboratory, using Aoshima's time stretched pulse technique. Measurements are carried out for glass fiber with thickness of 50 and 100 mm as highly absorbing materials and for ceramic with a thickness of 52 mm as relatively low absorbing material. The tested surface areas range from 0.0625 to 42 m² for glass fiber and from 0.1563 to 39.168 m² for ceramics. The absorption coefficients are determined at incidence angles from 0 to 45° in increments of 15°. With consideration of an active surface bounded by ellipse orbit, the minimum required surface area is 16 m² with a ratio of length to width of about 1.25. This value is twice the area size of the active surface, which is calculated from the geometry of source and microphone, and the width of the temporal window.     

Isolation of mitogenic substance from sclerotia of Sclerotinia sclerotiorum IFO 9395 extracted with phosphate buffer.

The buffer extracts (3S) of sclerotia of Sclerotinia sclerotiorum IFO 9395 contained mitogenic substance(s) to murine splenocytes (Shinohara et al. Chem. Pharm. Bull., 38, 2219 (1990)). Although the native 3S was slightly mitogenic, heating of 3S induced significant mitogenic activity. To isolate the mitogen, we separated 3S by ion-exchange and gel filtration chromatographies. The isolated mitogen, named sclerogen, has a molecular mass of 32 kilodaltons (kDa) on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and the isoelectric point (pI) of 5.9 by chromatofocusing. Sclerogen was significantly mitogenic in vitro against murine splenocytes after heat denaturation, and also showed the augmentation of the primary mixed lymphocyte reaction (MLR) in vitro. However, sclerogen did not show the activation of an alternative pathway of complement and hemagglutination activity. These results suggest that sclerogen is a unique mitogen which differs from lectins and shows mitogenicity after heat denaturation.     

Development of Non-Halogen Flame Retardant Optical Fiber and Optical Fiber Cord

A non-halogen highly flame-retardant 0.9mm optical fiber and 2.0mm simplex optical cord, which are harmonized with the ecosystem, have been developed. The characteristics of them are presented in this paper.     

Anomalous PL brightening caused by partial Auger recombination of a (D, X) complex during an impact ionization avalanche in n-GaAs

Partial Auger recombination of the (D⁰, X) bound-exciton in n-GaAs at 4.2 K during an impact ionization avalanche under an applied pulse voltage has been investigated. The bright photoluminescence (PL)-pattern observed by applying the pulse voltage, characterizes well the formation of a current density filament. The observation of the bright PL spectra inside the current density filament gives a quite new result concerning the partial Auger recombination process of the (D⁰, X) complex, leaving the neutral donor in the excited states.     

Determination of midodrine in human plasma by high-performance liquid chromatography with fluorescence detection.

A simple and sensitive fluorometric high-performance liquid chromatographic method was developed for the determination of midodrine in human plasma. After liquid-liquid extraction from plasma, the drug and 2-phenylglycinol (internal standard) were convened into the corresponding fluorescent derivatives by reaction with 3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride, a fluorescence derivatization reagent for amines. The derivatives were separated within 30 min on a reversed-phase column using isocratic elution with acetonitrile-methanol-water (10:30:60, v/v) and were detected spectrofluorometrically at 485 nm with excitation at 400 nm. The detection limit for midodrine was 0.3 pmol (76 pg) per mL plasma at a signal-to-noise ratio of 3.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007