Silica-porphyrin hybrid nanotubes for in vivo cell tracking by near-infrared fluorescence imaging

Near-infrared fluorescent silica-porphyrin hybrid nanotubes (HNTs) were successfully synthesized by π-π stacking, electrostatic interaction and a sol-gel reaction. The HNTs-labeled macrophages were detected in vivo, and the minimum detectable number of cells was 200. Furthermore, the biodistribution of HNTs-labeled macrophages was tracked by fluorescence imaging.     

Synthesis of 4‐Aryl‐1,7‐naphthyridine‐2(1H)‐thiones by the Electrocyclic Reaction of 4‐(1‐Arylalk‐1‐enyl)‐3‐isothiocyanatopyridines Generated in situ from the Corresponding Isocyanides

A convenient synthis for 4‐substituted and 3,4‐disubstituted 1,7‐naphthyridine‐2(1H)‐thiones 7 has been developed. The method is based on the electrocyclic reaction of 4‐(1‐arylalk‐1‐enyl)‐3‐isothiocyanatopyridines 6 , generated in situ by the treatment of the respective isocyanides 5 with S₈ in the presence of a catalytic amount of selenium. The isocyanides 5 can be easily prepared from commercially available pyridin‐3‐amine by conventional organic reactions.     

Charge ordering and carrier generation by air oxidation of a nickel complex with selenium-containing extended-tetrathiafulvalenedithiolate ligands

The structures and electrical properties of ((n)Bu(4)N)[Ni(dmstfdt)(2)] (1), ((n)Bu(4)N)(2)[Ni(dmstfdt)(2)] (2), and ((n)Bu(4)N)(3)[Ni(dmstfdt)(2)](2) (3), where dmstfdt = extended-tetrathiafulvalenedithiolate ligand, were examined. The fresh crystal of 1 was found to be a Mott insulator, but the crystal gradually became highly conducting because of air oxidation. Compound 3 exhibited a semiconducting charge-ordering state.     

Three-dimensional solution structure of bottromycin A2: a potent antibiotic active against methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococci

The three-dimensional (3D) structure of bottromycin A(2), a natural anti-methicillin-resistant Staphylococcus aureus (MRSA) and anti-vancomycin-resistant Enterococci (VRE) agent consisting of seven amino acids, has been investigated through NMR spectroscopy. On the basis of 57 experimental constraints, a total of 34 converged structures were obtained. The average pairwise atomic root mean square difference is 0.74±0.59 ? for all heavy atoms. The resulting structure indicates an interesting feature in that the three C-terminal residues of bottromycin A(2) fold back on the 12-membered cyclic skeleton made by the four N-terminal residues. Thus, MePro(2) and Thia-β-Ala-OMe(7), modification of which significantly affects the antibacterial activities of bottromycin A(2), are located on one side of its 3D structure. These distinct structural features might be important for the binding of bottromycin A(2) with the bacterial ribosome.     

Critical Role of Spherulite Structure on Behavior of Stabilizers in Poly(propylene) Stabilization

Summary: We found that the spherulite structure of polypropylene (PP) significantly influences the stability of PP by affecting the behavior of stabilizers. Smaller spherulites resulted in more homogeneous dispersion of stabilizers and their slower release into air, so as to elongate the lifetime of PP. Moreover, chemically and physically weak spherulite boundaries were selectively oxidized in the presence of stabilizers. The significance to control higher order structures on the stabilization of PP is reported.     

Mineral composition of frozen taro for determination of geographic origin

The mineral composition of frozen food of taro [Colocasia esculenta (L.) Schott] was analyzed to categorize the geographical production place of taro. The concentrations of Co and H₂PO₄ ⁻ were found to be useful to separate the producing place between Japan and China. The analysis was performed by instrumental neutron activation analysis (INAA) and ion chromatography (IC). In the case of INAA, the samples were dried and sealed in a vinyl bag and irradiated with thermal neutrons from JRR3M, installed at Japan Atomic Energy Agency (JAEA). The activated samples were cooled down for a few weeks and the elements (Co, Cr, Fe, Rb, Zn) were determined. Cobalt concentration of frozen taro from China was higher than that from Japan. The tendency was the same in the fresh sample of taro. When concentration of H₂PO₄ ⁻ of frozen sample was measured, taro from Japanese product was higher than that of Chinese one, contrary to fresh sample. This result might be caused by the leakage of H₂PO₄ ⁻ during freezing process, indicating that we should be careful to apply the discrimination indicators. In addition to Co, there was a significant difference of Rb and Fe concentrations between frozen taro from Japan and China.     

Influence of peak inspiratory flow rates and pressure drops on inhalation performance of dry powder inhalers

The aim of this study was to reveal the relationship between human inspiratory flow patterns and the concomitant drops in pressure in different inhalation devices, and the influence of the devices on inhalation performance. As a model formulation for inhalers, a physically mixed dry powder composed of salbutamol sulfate and coarse lactose monohydrate was selected. The drops in pressure at 28.3?L/min of three inhalation devices, Single-type, Dual-type, and Reverse-type, was 1.0, 5.1, and 8.7?kPa, respectively. Measurements of human inspiratory patterns revealed that although the least resistant device (Single) had large inter- and intra-individual variation of peak flow rate (PFR), the coefficients of variation of PFR of the three devices were almost the same. In tests with a human inspiratory flow simulator in vitro, inhalation performance was higher, but the variation in inhalation performance in the range of human flow patterns was wider, for the more resistant device. To minimize the intra- and inter-individual variation in inhalation performance for the model formulation in this study, a formulation design that allows active pharmaceutical ingredient to detach from the carrier with a lower inhalation flow rate is needed.     

Glucose and lactate biosensors prepared by a layer-by-layer deposition of concanavalin A and mannose-labeled enzymes: electrochemical response in the presence of electron mediators.

An electrochemical response of glucose and lactate biosensors which were prepared by coating a platinum electrode with a thin film composed of concanavalin A and mannose-labeled glucose oxidase (GOx) or lactate oxidase (LOx) was evaluated in the presence of ferrocene derivatives as electron mediator. Both glucose and lactate biosensors showed catalytic current to glucose and lactate, respectively, in cyclic voltammetry, suggesting that the ferrocene derivatives can mediate electron transport smoothly from the reduced forms of GOx and LOx in the thin films to the electrode. Among the three kinds of ferrocene derivatives used, ferrocenylmethanol was found to be the most suitable electron mediator because of its low oxidation potential. The glucose and lactate sensors gave useful calibration graphs, in which higher detection limits were reached as compared with those observed when the sensors were operated in the absence of electron mediator.     

Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8

An Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8 has been conducted. A liquid nitrogen cooled high-heat load monochromator was installed and a 2nd experimental hutch was constructed. The instruments installed in the hutch allow for a variety of sample conditions. Newly developed high-resolution monochromators with better stability including the back scattering geometry monochromator have opened up the easy access to more isotopes and more precise measurements.