Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

Aromaticity of planar boron clusters confirmed

Low-energy boron clusters are characterized by two-dimensional geometry. Aromaticity of these planar boron clusters was established in terms of topological resonance energy (TRE). All planar boron clusters were found to be highly aromatic with large positive TREs even if they have 4n pi-electrons. Aromaticity must therefore be the origin of unusual planar or quasi-planar geometry. Thus, the aromaticity concept is as useful in boron chemistry as it is in general organic chemistry. It is evident that the Hückel 4n + 2 rule of aromaticity should not be applied to such polycyclic pi-systems. Some of the boron clusters are in the triplet electronic state to attain higher aromaticity. Multivalency and electron deficiency of boron atoms are responsible for lowering the energies of low-lying pi molecular orbitals and then for enhancing aromaticity. For polycyclic pi-systems, paratropicity does not always indicate antiaromaticity.     

Continuous Photoreduction of Methyl Viologen Using Disubstituted Terthiophenes and EDTA in Aqueous Solution

The continuous photoreduction of methyl viologen by 5,5″-bis(aminomethyl)-2,2′:5′,2″-terthiophene (AT) and 2,2′:5′,2″-terthiophene-5,5″-dicarboxylic acid (CT), using EDTA as a sacrificial electron donor, has been investigated in aqueous solution at various pH. Apparent rates and efficiencies of production of the methyl viologen radical cation (MV⁺) were found to be dependent on the pH, the concentrations of all three components and the intensity of the incident light. The highest conversion efficiency (77%) was shown by the bis(aminoniethyI (-substituted terthiophene AT at pH 7.7. The quantum yield for the formation of MV⁺ under these conditions was 0.24, which is comparable with other common systems     

Photolabile and paramagnetic reagents for the investigation of transmembrane signaling events.

To investigate the dynamics of membrane processes that may be integral components of specific transmembrane signaling events we have synthesized several novel paramagnetic probes and their photoreactive counterparts. The structure of these probes was designed to (1) restrict "flipping" across the membrane bilayer; (2) contain paramagnetic or photoreactive moieties that could be placed at specific depths within the bilayer; (3) provide information about membrane structure as well as dynamics of protein movement; and (4) in the case of the photoreactive probes, be of high specific radioactivity. The molecules described in this paper consist of amino acid, dipeptide, or carbohydrate groups attached to arylazide- or nitroxide-bearing fatty acids. The synthesis and initial characterization of these membrane probes is described.     

Highly sensitive determination of a polymeric hindered amine light stabilizer in polypropylene by reactive thermal desorption-gas chromatography using nitrogen-specific detection

Highly sensitive and specific determination of trace amounts of a polymeric hindered amine light stabilizer (HALS) in polypropylene (PP) materials could be established by improving reactive thermal desorption-gas chromatography (RTD-GC) in the presence of an organic alkali, tetramethylammonium hydroxide. By using nitrogen-phosphorus detection, highly selective detection of the HALS-related components was attained. In addition, the use of a polar poly(ethylene glycol) separation column alleviated the adsorption of minor specific pyrolysis products. This modified RTD-GC method allowed the determination of the polymeric HALS (Mr 1900) in PP even for trace concentrations between 100 and 500 ppm, through observing selectively the characteristic products containing a tetramethylpiperidine moiety, which had been impossible to detect under the previous RTD-GC conditions using a non-polar separation column and conventional flame ionization detection.     

Structural difference between a superconducting sodium cobalt oxide and its related phase

Monolayer hydrate (MLH) Na_xCoO₂·y′H₂O was obtained from superconducting bilayer hydrate (BLH) Na_xCoO₂·yH₂O by partial extraction of H₂O molecules between the CoO₂ layers. Magnetization measurements indicated that electron densities in the CoO₂ layer of the MLH phase remained unchanged after the water extraction. Nevertheless, superconductivity was completely suppressed in the MLH phase. This strongly suggests that the highly 2D nature in the BLH phase due to its thick insulating layers consisting of H₂O molecules and Na⁺ ions plays an important role for inducing superconductivity.     

Screening method for organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine based on intramolecular excimer-forming fluorescence derivatization

A simple screening method of organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine is described. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, 4-(1-pyrene)butanoic acid hydrazide (PBH). Dicarboxylic acids in urine were converted to the corresponding dipyrene-labeled derivatives by reaction with PBH in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and pyridine, and the derivatives afforded intramolecular excimer fluorescence (420-540 nm) which can clearly be discriminated from the normal fluorescence (360-420 nm) emitted from reagent blanks. The technique is so selective that it permits spectrofluorometric measurement of total amount of dicarboxylic acids by the direct derivatization of diluted urine samples. The same reaction mixture has also served as a liquid chromatographic (LC) sample for the separative determination of individual dicarboxylic acids. The spectrofluorometric data did not contradict with the LC data. These methods were usefully applied to preliminary screening test of glutaric aciduria. In conclusion, the present derivatization method allows rapid and direct determination of total amount of dicarboxylic acids in human urine samples.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).