Thermally Induced Intra‐Carboxyl Proton Shuttle in a Molecular Rack‐and‐Pinion Cascade Achieving Macroscopic Crystal Deformation

Proton transport via dynamic molecules is ubiquitous in chemistry and biology. However, its use as a switching mechanism for properties in functional molecular assemblies is far less common. In this study, we demonstrate how an intra‐carboxyl proton shuttle can be generated in a molecular assembly akin to a rack‐and‐pinion cascade via a thermally induced single‐crystal‐to‐single‐crystal phase transition. In a triply interpenetrated supramolecular organic framework (SOF), a 4,4′‐azopyridine (azpy) molecule connects to two biphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄BPTC) molecules to form a functional molecular system with switchable mechanical properties. A temperature change reversibly triggers a molecular movement akin to a rack‐and‐pinion cascade, which mainly involves 1) an intra‐carboxyl proton shuttle coupled with tilting of the azo molecules and azo pedal motion and 2) H₄BPTC translation. Moreover, both the molecular motions are collective, and being propagated across the entire framework, leading to a macroscopic crystal expansion and contraction.     

Construction of Chiral Tri‐ and Tetra‐Arylmethanes Bearing Quaternary Carbon Centers: Copper‐Catalyzed Enantioselective Propargylation of Indoles with Propargylic Esters

Copper‐catalyzed enantioselective propargylation of indoles with propargylic esters and sequential Huisgen cycloaddition with azides lead to the construction of chiral triarylmethanes, bearing a quaternary carbon center, with high to excellent enantioselectivities. The result described herein can be used in the enantioselective preparation of a tetraarylmethane.     

Vibronic interaction in metalloporphyrin pi-anion radicals

The vibronic (vibrational-electronic) interactions in the pi-anion radicals of the metalloporphyrins (M=Cr, Mn, Fe, Co, Ni, Cu, and Zn), which show delocalized D4h structures in the neutral states, are discussed using B3LYP density-functional-theory calculations. The B1g and B2g modes of vibration can remove the degenerate 2Eg state of the pi-anion radicals in the D4h symmetric structures to lead to rectangular and diamond D2h distortions, respectively. Calculated vibronic coupling constants demonstrate that the B1g modes of vibration better couple with the degenerate electronic state, leading to the rectangular D2h distortion. In particular, the B1g modes of nu10 and nu11, which have dominant contributions from Calpha-Cm and Cbeta-Cbeta stretching, give large vibronic coupling constants in the pi-anion radicals. The vibronic coupling constant can be viewed as the Jahn-Teller distortion force, and therefore these C-C stretching B1g modes will play a central role in the Jahn-Teller effect of the pi-anion radicals of the metalloporphyrins.     

Botryoidal assembly of cholesteryl-pullulan/poly(N-isopropylacrylamide) nanogels

Hybrid nanogels consisting of cholesteryl-modified pullulan (CHP) and poly(N-isopropylacrylamide) (PNIPAM) were synthesized by graft free-radical copolymerization of N-isopropylacrylamide (NIPAM) onto methacryloyl-substituted CHP nanogels (CHPMA) in water at 50 degrees C in the presence of a water-soluble free radical initiator. Depending on the initial NIPAM/CHPMA ratio, CHP-PNIPAM (CN) nanogels containing 30.8-84.8 wt % PNIPAM were obtained in the form of self-assembled nanoparticles with a hydrodynamic radius (Rh) of 69.0-116.0 nm in water kept at 20 degrees C. Hybrid nanogels of sufficiently high NIPAM content, such as the sample CN90, which contains 79.6 wt % NIPAM, exhibited a two-step response to changes in solution (3 mg/mL) temperature: a decrease in Rh from 93 to 57 nm as the temperature increased from 20 to 35 degrees C, followed by a sharp increase in Rh from 57 nm to 90 nm at 55 degrees C. Both steps in this temperature response were reversible. The multistep response to temperature of the CN nanogels was attributed to the morphology of the nanogels, which are seen as consisting of grape-like (botryoidal) clusters of associated native nanogels held together via cholesteryl cross-linking points and held together by the grafted PNIPAM chains.     

Photoluminescence modification in 3D-ordered films of fluorescent microspheres

3D-ordered latex films made of fluorescent microspheres were fabricated by sonication-assisted casting. Angle-dependent changes of photoluminescent (PL) emission were observed for the as-prepared fluorescent latex films with diameter of 200 nm. The PL emission at 483 and 512 nm was enhanced when they were near the edge of the stop band, and the suppression of PL emission was observed at 483 and 512 nm when they were located in the stop band. Resonance enhancement of PL emission was observed at 512 nm for the latex film with latex diameter of 1011 nm, in which the fluorescent sphere acted as both active emitting source and resonance microcavity.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Adsorption and decomposition of formic acid (DCOOD) on NiO(111) and Ni(111) surfaces probed by SFG

Received: 20 September 1998 / Revised version: 3 November 1998     

Improvement of Ni/SDC anode by alkaline earth metal oxide addition for direct methane–solid oxide fuel cells

The anodic performances of Ni/CeO₂–Sm₂O₃(Ni/SDC) modified by the addition of alkaline earth metal oxides (MgO, CaO, and SrO) were investigated for direct oxidation of CH₄ in solid oxide fuel cells (SOFCs). Although the initial power density of cell with Ni/SDC anode modified by the addition of CaO was slightly lower than that of cell with Ni/SDC, the former anode exhibited an excellent stability compared to the latter one. Such a high stability of Ni–CaO/SDC anode may come from the inhibition of carbon deposition in addition to the retained ionic conductivity of anode.     

Self‐Assembled Nanogel of Hydrophobized Dendritic Dextrin for Protein Delivery

Highly branched cyclic dextrin derivatives (CH‐CDex) that are partly substituted with cholesterol groups have been synthesized. The CH‐CDex forms monodisperse and stable nanogels with a hydrodynamic radii of ≈10 nm by the self‐assembly of 4–6 CH‐CDex macromolecules in water. The CH‐CDex nanogels spontaneously trap 10–16 molecules of fluorescein isothiocyanate‐labeled insulin (FITC‐Ins). The complex shows high colloidal stability: no dissociation of trapped insulin is observed after at least 1 month in phosphate buffer (0.1 M , pH 8.0). In the presence of bovine serum albumin (BSA, 50 mg · mL^?1), which is a model blood system, the FITC‐Ins trapped in the nanogels is continuously released (≈20% at 12 h) without burst release. The high‐density nanogel structure derived from the highly branched CDex significantly affects the stability of the nanogel–protein complex.