Comparison of protein A affinity sorbents III. Life time study

Protein A affinity chromatography is a popular purification method for immunoglobulins applied at various scales, ranging from micro-tube up to 1000l column format. Three novel high capacity protein A affinity chromatography media have been subjected to a lifetime study using 50 consecutive purification cycles of a cell culture supernatant (CCS) containing a monoclonal antibody. Chromatographic conditions followed protocols used in industrial antibody processing, including stripping and cleaning-in-place of the resins. For all three media, no significant loss of purification performance (measured by sodium dodecylsulfate polyacrylamide gel electrophoresis and analytical size-exclusion chromatography (SEC)) could be observed over 50 cycles. Eluate samples were analyzed for leaked protein A and host cell protein (HCP) content. MabSelect SuRe, the first protein A affinity medium compatible with alkaline regeneration conditions, exhibited the lowest leakage levels, in the range of 1-3 ppm. For the media MabSelect Xtra and ProSep-vA Ultra, leakage levels were in the range of 30-40 ppm. Host cell protein content of eluates from MabSelect Xtra and SuRe were between 300 and 700 ppm, whereas for ProSep-vA Ultra 3000-4000 ppm was achieved.     

Ion-exclusion chromatography with the direct UV detection of non-absorbing inorganic cations using an anion-exchange conversion column in the iodide-form

An ion-exclusion chromatographic method for the direct UV detection of non-absorbing inorganic cations such as sodium (Na⁺), ammonium (NH₄⁺) and hydrazine (N₂H₅⁺) ions was developed by connecting an anion-exchange column in the I⁻-form after the separation column. For example, NH₄⁺ is converted to a UV-absorbing molecule, NH₄I, by the anion-exchange column in the I⁻-form after the ion-exclusion separation on anion-exchange column in the OH⁻-form with water eluent. As a result, the direct UV detection of Na⁺, NH₄⁺ and N₂H₅⁺ could be successfully obtained as well as the well-resolved separation. The calibration graphs of the analyte cations detected with UV at 230 nm were linear in the range of 0.001-5.0 mM. The detection limits at S/N = 3 of the cations were below 0.1 μM. This method was applied to real water analysis, the determination of NH₄⁺ in river and rain waters, or that of N₂H₅⁺ in boiler water, with the satisfactory results. This could be applied also to low- or non-absorbing anions such as fluoride or hydrogencarbonate ions by the combination of a weakly acidic cation-exchange resin in the H⁺-form as the separation column and the anion-exchange conversion column.     

Determination of some aliphatic carboxylic acids in anaerobic digestion process waters by ion-exclusion chromatography with conductimetric detection on a weakly acidic cation-exchange resin column

The determination of seven aliphatic carboxylic acids, formic, acetic, propionic, isobutyric, n-butyric, isovaleric and n-valeric acids in anaerobic digestion process waters was examined using ion-exclusion chromatography with conductimetric detection. The analysis of these biologically important carboxylic acids is necessary as a measure for evaluating and controlling the process. The ion-exclusion chromatography system employed consisted of polymethacrylate-based weakly acidic cation-exchange resin columns (TSKgel OApak-A or TSKgel Super IC-A/C). weakly acidic eluent (benzoic acid), and conductimetric detection. Particle size and cation-exchange capacity were 5 microm and 0.1 meq./ml for TSKgel OApak-A and 3 microm and 0.2 meq./ml for TSKgel Super IC-A/C, respectively. A dilute eluent (1.0-2.0 mM) of benzoic acid was effective for the high resolution and highly conductimetric detection of the carboxylic acids. The good separation of isobutyric and n-butyric acids was performed using the TSKgel Super IC-A/C column (150 mm x 6.0 mm i.d. x 2). The simple and good chromatograms were obtained by the optimized ion-exclusion chromatography conditions for real samples from mesophilic anaerobic digestors, thus the aliphatic carboxylic acids were successfully determined without any interferences.     

Ion-exclusion/adsorption chromatography of dimethylsulfoxide and its derivatives for the evaluation to quality-test of TiO(2)-photocatalyst in water

Ion-exclusion/adsorption chromatography of dimethylsulfoxide (DMSO) and its derivatives, i.e., methanesulfinic acid (MSI), methanesulfonic acid (MSA) and sulfuric acid (SA), was developed in order to clear the decomposition mechanism of DMSO on quality-test of TiO₂-photocatalyst in water. The separation was achieved by the adsorption effect for DMSO and ion-exclusion effect for MSI, MSA and SA under optimum conditions, using a weakly acidic cation-exchange resin column with 20 mM succinic acid as the eluent. In this system, DMSO and MSI with UV at 195 nm and MSA and SA with conductivity detection were consecutively determined by single injection and single separation column. This method was used to monitor the artificial decomposition of DMSO induced by a photocatalyst. The concentration of DMSO by active oxygens (e.g., OH radical) generated from surface of photocatalyst was found to be decreased through the stoichiometric reaction in the order of MSI, MSA and SA.     

Evidence of two dimensionality in quasi-one-dimensional cobalt oxides

The quasi-one-dimensional (Q1D) cobalt oxides A(N + 2)Co(n + 1)O(3n + 3) (A = Ca, Sr, and Ba, n = 1 - infinity) were investigated by muon-spin spectroscopy under applied pressures of up to 1.1 GPa. The relationship between the onset Néel temperature T(on)(N) and the interchain distance (d(ic)), which increases monotonically with n, is well fitted by the formula T(N)/T(N,0) = (1 - d(ic)/d(ic,o)(beta), here for T(on)(N) approximately 100 K for Ca(3)Co(2)O(6) (n = 1) and approximately 15 for BaCoCoO(3) (n = infinity at ambient P. The T(on)(N) - d(ic) curve also predicts a large dependence of Y(N) for the compounds with n > or = 5, i.e., in the vicinity of , while the compounds show only a very small effect. Indeed, our high-pressure mu(+) results show that of BaCoO(3) is enhanced by with a slope of 2.2 K(Gpa), whereas no detectable changes by P for both Ca(3)Co(2)O(6) and Sr(4)Co(3)O(9) (n = 2). This clearly confirms the role of the 2D-antiferromagnetic interaction on T(on)(N) in the Q1D cobalt oxides.     

A spot test for aqueous phosphate by color band formation

Phosphate is generally analyzed by color intensity of phosphoantimonylmolybdenum blue (PAMB): especially by a spot test based on spectrophotometric or visual determination. Visual determination is one of the simplest and most inexpensive methods; however, it is believed to be of low precision. In this work, we have developed an alternative phosphate spot test, where phosphate concentration is measured by the color band length of PAMB formed in a detection tube similar to a gas detection tube. The color band is formed by the entrapment of the hydrophobic ion pair of PAMB and quaternary ammonium ions in the column; we demonstrated that this color band length correlates quantitatively with the phosphate concentration. In order to optimize the measurement performance, systematic investigations have been carried out for various experimental parameters such as phosphate concentration, preparation conditions of the column packing material, the type of support material (either silica-gel or PVC), the solution feeding conditions (filtration or penetration), and volume of the sample solution. The effects from some co-existing components were also studied for the measurement of real samples.Determination of phosphate concentrations in actual wastewaters was successfully carried out by this method, indicating that the quantification range achievable was of 3-18 mg PO(4) L(-1) without dilution prior to the analysis. No interference was observed from suspended solid (SS) and organic pollutants (COD, TOC) during the wastewater analysis. Because of the simplicity and rapid processing of the samples (not requiring any special instruments) this newly developed method can be applied to the on-site analysis of wastewater.     

Direct growth of comet-like superstructures of Au-ZnO submicron rod arrays by solvothermal soft chemistry process

The synthesis, characterization and proposed growth process of a new kind of comet-like Au-ZnO superstructures are described here. This Au-ZnO superstructure was directly created by a simple and mild solvothermal reaction, dissolving the reactants of zinc acetate dihydrate and hydrogen tetrachloroaurate tetrahydrate (HAuCl₄·4H₂O) in ethylenediamine and taking advantage of the lattice matching growth between definitized ZnO plane and Au plane and the natural growth habit of the ZnO rods along [001] direction in solutions. For a typical comet-like Au-ZnO superstructure, its comet head consists of one hemispherical end of a central thick ZnO rod and an outer Au-ZnO thin layer, and its comet tail consists of radially standing ZnO submicron rod arrays growing on the Au-ZnO thin layer. These ZnO rods have diameters in range of 0.2-0.5 μm, an average aspect ratio of about 10, and lengths of up to about 4 μm. The morphology, size and structure of the ZnO superstructures are dependent on the concentration of reactants and the reaction time. The HAuCl₄·4H₂O plays a key role for the solvothermal growth of the comet-like superstructure, and only are ZnO fibers obtained in absence of the HAuCl₄·4H₂O. The UV-vis absorption spectrum shows two absorptions at 365-390 nm and 480-600 nm, respectively attributing to the characteristic of the ZnO wide-band semiconductor material and the surface plasmon resonance of the Au particles.     

High-speed simultaneous ion-exclusion/cation-exchange chromatography of anions and cations on a weakly acidic cation-exchange resin column

The simultaneous ion-exclusion/cation-exchange separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin of 3 microm particle size was used to achieve the simultaneous high-speed separation of anions and cations (Cl(-), NO3(-), SO4(2-), Na(+), K(+), NH4(+), Ca(2+) and Mg(2+)) commonly found in environmental samples. The high-speed simultaneous separation is based on a combination of the ion-exclusion mechanism for the anions and the cation-exchange mechanism for cations. The complete separation of the anions and cations was achieved in 5 min by elution with 15 mM tartaric acid-2.5 mM 18-crown-6 at a flow-rate of 1.5 ml/min. Detection limits at S/N=3 ranged from 0.36 to 0.68 microM for anions and 0.63-0.99 microM for cations. This method has been applied to the simultaneous determination of anions and cations in several environmental waters with satisfactory results.     

Estimating time to contact during pursuit eye movements: Comparison between geometric model prediction and human performance

While an object is approaching a particular location, we can make an estimate of the time when the object will arrive at that location. A geometric model predicts that the estimate of time-to-contact (TTC) is greatly improved by using the rate of change of visual direction of the object when the object is moving with a slow velocity toward a point of nearest approach at a distance far from the observer. It has been shown that pursuit eye movements provide the rate of change of visual direction of an approaching object. We conducted psychophysical experiments, and compared TTC estimates during pursuit eye movements to those during fixation. We found that the differences in TTC estimates between fixation and pursuit show a qualitatively similar pattern to the geometric model prediction. However, the results also show that the magnitudes of the TTC estimation errors are greater than the theoretical values from the geometric model, indicating that the human visual system has a perceptual bias in estimating TTC. These results suggest that the human visual system estimates TTC during pursuit eye movements in a different way from the geometric model, although the effect of these eye movements on TTC estimates in human performance is qualitatively consistent with the model prediction.